Re: [PATCH 1/2] USB: EHCI: Add register array bounds to HCS ports

[Kees Cook]

On Wed, Aug 18, 2021 at 10:44:42AM -0400, Alan Stern wrote:
> On Tue, Aug 17, 2021 at 09:30:33PM -0700, Kees Cook wrote:
> > The original EHCI register struct used a trailing 0-element array for
> > addressing the N_PORTS-many available registers. However, after
> > commit a46af4ebf9ff ("USB: EHCI: define extension registers like normal ones")
> > the 0-element array started to overlap the USBMODE extension register.
> > 
> > To avoid future compile-time warnings about accessing indexes within a
> > 0-element array, rearrange the struct to actually describe the expected
> > layout (max 15 registers) with a union. All offsets remain the same, and
> > bounds checking becomes possible on accesses to port_status and hostpc.
> > 
> > There are no binary differences, and struct offsets continue to match.
> 
> Two comments...
> 
> > ---
> >  include/linux/usb/ehci_def.h | 24 +++++++++++++-----------
> >  1 file changed, 13 insertions(+), 11 deletions(-)
> > 
> > diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
> > index 78e006355557..5398f571113b 100644
> > --- a/include/linux/usb/ehci_def.h
> > +++ b/include/linux/usb/ehci_def.h
> > @@ -45,6 +45,7 @@ struct ehci_caps {
> >  #define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
> >  #define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
> >  #define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
> > +#define HCS_N_PORTS_MAX		0xf		/* N_PORTS valid 0x1-0xF */
> 
> I would prefer to see this value in decimal.  It seems very odd to say 
> something like "The maximum number of ports is 0xf".

Okay, done.

> 
> >  
> >  	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
> >  /* EHCI 1.1 addendum */
> > @@ -126,8 +127,9 @@ struct ehci_regs {
> >  	u32		configured_flag;
> >  #define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
> >  
> > -	/* PORTSC: offset 0x44 */
> > -	u32		port_status[0];	/* up to N_PORTS */
> > +	union {
> > +		/* PORTSC: offset 0x44 */
> > +		u32	port_status[HCS_N_PORTS_MAX];
> 
> Please don't lose the second comment.

I've put it back. It seemed redundant in the face of HCS_N_PORTS_MAX
being there now.

> 
> >  /* EHCI 1.1 addendum */
> >  #define PORTSC_SUSPEND_STS_ACK 0
> >  #define PORTSC_SUSPEND_STS_NYET 1
> > @@ -164,28 +166,28 @@ struct ehci_regs {
> >  #define PORT_CSC	(1<<1)		/* connect status change */
> >  #define PORT_CONNECT	(1<<0)		/* device connected */
> >  #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
> > -
> > -	u32		reserved3[9];
> > -
> > -	/* USBMODE: offset 0x68 */
> > -	u32		usbmode;	/* USB Device mode */
> > +		struct {
> > +			u32	reserved3[9];
> > +			/* USBMODE: offset 0x68 */
> > +			u32	usbmode;	/* USB Device mode */
> > +		};
> >  #define USBMODE_SDIS	(1<<3)		/* Stream disable */
> >  #define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
> >  #define USBMODE_CM_HC	(3<<0)		/* host controller mode */
> >  #define USBMODE_CM_IDLE	(0<<0)		/* idle state */
> > -
> > -	u32		reserved4[6];
> > +	};
> > +	u32		reserved4;
> >  
> >  /* Moorestown has some non-standard registers, partially due to the fact that
> >   * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
> >   * PORTSCx
> >   */
> >  	/* HOSTPC: offset 0x84 */
> > -	u32		hostpc[0];	/* HOSTPC extension */
> > +	u32		hostpc[HCS_N_PORTS_MAX];
> >  #define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
> >  #define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
> >  
> > -	u32		reserved5[17];
> > +	u32		reserved5[2];
> >  
> >  	/* USBMODE_EX: offset 0xc8 */
> >  	u32		usbmode_ex;	/* USB Device mode extension */
> 
> Otherwise okay.

Thanks!

-- 
Kees Cook