Re: [PATCH v3 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state

From: Matthias Kaehlcke
Date: Fri Jun 25 2021 - 17:11:57 EST


On Fri, Jun 25, 2021 at 12:21:58AM +0530, Sibi Sankar wrote:
> The power domains exposed by the AOSS QMP driver control the load state
> resources linked to modem, adsp, cdsp remoteprocs. These are used to
> notify the Always on Subsystem (AOSS) that a particular co-processor is
> up/down. AOSS uses this information to wait for the co-processors to
> suspend before starting its sleep sequence.
>
> These co-processors enter low-power modes independent to that of the
> application processor and the load state resources linked to them are
> expected to remain unaltered across system suspend/resume cycles. To
> achieve this behavior lets stop using the power-domains exposed by the
> AOSS QMP node and replace them with generic qmp_send interface instead.
>
> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> ---
> drivers/remoteproc/qcom_q6v5.c | 56 +++++++++++++++++++++++++-
> drivers/remoteproc/qcom_q6v5.h | 7 +++-
> drivers/remoteproc/qcom_q6v5_adsp.c | 7 +++-
> drivers/remoteproc/qcom_q6v5_mss.c | 44 ++++----------------
> drivers/remoteproc/qcom_q6v5_pas.c | 80 +++++++++----------------------------
> drivers/remoteproc/qcom_q6v5_wcss.c | 4 +-
> 6 files changed, 94 insertions(+), 104 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
> index 9627a950928e..4a9a481c211b 100644
> --- a/drivers/remoteproc/qcom_q6v5.c
> +++ b/drivers/remoteproc/qcom_q6v5.c
> @@ -16,8 +16,28 @@
> #include "qcom_common.h"
> #include "qcom_q6v5.h"
>
> +#define Q6V5_LOAD_STATE_MSG_LEN 64
> #define Q6V5_PANIC_DELAY_MS 200
>
> +static int q6v5_load_state_toggle(struct qcom_q6v5 *q6v5, bool enable)
> +{
> + char buf[Q6V5_LOAD_STATE_MSG_LEN] = {};
> + int ret;
> +
> + if (IS_ERR(q6v5->qmp))
> + return 0;
> +
> + snprintf(buf, sizeof(buf),
> + "{class: image, res: load_state, name: %s, val: %s}",
> + q6v5->load_state, enable ? "on" : "off");
> +
> + ret = qmp_send(q6v5->qmp, buf, sizeof(buf));
> + if (ret)
> + dev_err(q6v5->dev, "failed to toggle load state\n");
> +
> + return ret;
> +}
> +
> /**
> * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
> * @q6v5: reference to qcom_q6v5 context to be reinitialized
> @@ -26,6 +46,12 @@
> */
> int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5)
> {
> + int ret;
> +
> + ret = q6v5_load_state_toggle(q6v5, true);
> + if (ret)
> + return ret;
> +
> reinit_completion(&q6v5->start_done);
> reinit_completion(&q6v5->stop_done);
>
> @@ -47,6 +73,7 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_prepare);
> int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5)
> {
> disable_irq(q6v5->handover_irq);
> + q6v5_load_state_toggle(q6v5, false);
>
> return !q6v5->handover_issued;
> }
> @@ -196,12 +223,13 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_panic);
> * @pdev: platform_device reference for acquiring resources
> * @rproc: associated remoteproc instance
> * @crash_reason: SMEM id for crash reason string, or 0 if none
> + * @load_state: load state resource string
> * @handover: function to be called when proxy resources should be released
> *
> * Return: 0 on success, negative errno on failure
> */
> int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> - struct rproc *rproc, int crash_reason,
> + struct rproc *rproc, int crash_reason, const char *load_state,
> void (*handover)(struct qcom_q6v5 *q6v5))
> {
> int ret;
> @@ -210,6 +238,7 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> q6v5->dev = &pdev->dev;
> q6v5->crash_reason = crash_reason;
> q6v5->handover = handover;
> + q6v5->load_state = kstrdup_const(load_state, GFP_KERNEL);
>
> init_completion(&q6v5->start_done);
> init_completion(&q6v5->stop_done);
> @@ -286,9 +315,34 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> return PTR_ERR(q6v5->state);
> }
>
> + q6v5->qmp = qmp_get(&pdev->dev);
> + if (IS_ERR(q6v5->qmp)) {
> + if (PTR_ERR(q6v5->qmp) != -ENODEV) {
> + if (PTR_ERR(q6v5->qmp) != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "failed to acquire load state\n");
> + return PTR_ERR(q6v5->qmp);
> + }
> + } else {
> + if (!q6v5->load_state) {
> + dev_err(&pdev->dev, "load state resource string empty\n");
> + return -EINVAL;
> + }
> + }
> +
> return 0;
> }
> EXPORT_SYMBOL_GPL(qcom_q6v5_init);
>
> +/**
> + * qcom_q6v5_deinit() - deinitialize the q6v5 common struct
> + * @q6v5: reference to qcom_q6v5 context to be deinitialized
> + * @pdev: platform_device reference for acquiring resources
> + */
> +void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5, struct platform_device *pdev)
> +{

pdev isn't used, remove it?

kfree_const(q6v5->load_state);

> + qmp_put(q6v5->qmp);
> +}
> +EXPORT_SYMBOL_GPL(qcom_q6v5_deinit);
> +
> MODULE_LICENSE("GPL v2");
> MODULE_DESCRIPTION("Qualcomm Peripheral Image Loader for Q6V5");
> diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
> index 1c212f670cbc..3d9f525cb4ec 100644
> --- a/drivers/remoteproc/qcom_q6v5.h
> +++ b/drivers/remoteproc/qcom_q6v5.h
> @@ -5,6 +5,7 @@
>
> #include <linux/kernel.h>
> #include <linux/completion.h>
> +#include <linux/soc/qcom/qcom_aoss.h>
>
> struct rproc;
> struct qcom_smem_state;
> @@ -15,6 +16,8 @@ struct qcom_q6v5 {
> struct rproc *rproc;
>
> struct qcom_smem_state *state;
> + struct qmp *qmp;
> +
> unsigned stop_bit;
>
> int wdog_irq;
> @@ -32,12 +35,14 @@ struct qcom_q6v5 {
>
> bool running;
>
> + const char *load_state;
> void (*handover)(struct qcom_q6v5 *q6v5);
> };
>
> int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> - struct rproc *rproc, int crash_reason,
> + struct rproc *rproc, int crash_reason, const char *load_state,
> void (*handover)(struct qcom_q6v5 *q6v5));
> +void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5, struct platform_device *pdev);
>
> int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
> int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> index 8b0d8bbacd2e..0f5e0fd216b4 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -185,7 +185,9 @@ static int adsp_start(struct rproc *rproc)
> int ret;
> unsigned int val;
>
> - qcom_q6v5_prepare(&adsp->q6v5);
> + ret = qcom_q6v5_prepare(&adsp->q6v5);
> + if (ret)
> + return ret;
>
> ret = clk_prepare_enable(adsp->xo);
> if (ret)
> @@ -465,7 +467,7 @@ static int adsp_probe(struct platform_device *pdev)
> if (ret)
> goto disable_pm;
>
> - ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
> + ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, NULL,
> qcom_adsp_pil_handover);

Doesn't passing a load_state of NULL cause qcom_q6v5_init() to fail with -EINVAL?

> --- a/drivers/remoteproc/qcom_q6v5_wcss.c
> +++ b/drivers/remoteproc/qcom_q6v5_wcss.c
> @@ -1044,8 +1044,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
> if (ret)
> goto free_rproc;
>
> - ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, desc->crash_reason_smem,
> - NULL);
> + ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, desc->crash_reason_smem, NULL, NULL);

Same as for adsp_probe(), doesn't a load_state of NULL cause _init() to fail?