Re: [PATCH net-next v1 7/9] net: dsa: qca: ar9331: add bridge support

[Florian Fainelli]

On 4/3/2021 04:48, Oleksij Rempel wrote:
> This switch is providing forwarding matrix, with it we can configure
> individual bridges. Potentially we can configure more then one not VLAN

s/then/than/

> based bridge on this HW.
>
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>   drivers/net/dsa/qca/ar9331.c | 73 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 73 insertions(+)
>
> diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
> index b2c22ba924f0..bf9588574205 100644
> --- a/drivers/net/dsa/qca/ar9331.c
> +++ b/drivers/net/dsa/qca/ar9331.c
> @@ -40,6 +40,7 @@
>    */
>   
>   #include <linux/bitfield.h>
> +#include <linux/if_bridge.h>
>   #include <linux/module.h>
>   #include <linux/of_irq.h>
>   #include <linux/of_mdio.h>
> @@ -1134,6 +1135,76 @@ static int ar9331_sw_set_ageing_time(struct dsa_switch *ds,
>   				  val);
>   }
>   
> +static int ar9331_sw_port_bridge_join(struct dsa_switch *ds, int port,
> +				      struct net_device *br)
> +{
> +	struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
> +	struct regmap *regmap = priv->regmap;
> +	int port_mask = BIT(priv->cpu_port);
> +	int i, ret;
> +	u32 val;
> +
> +	for (i = 0; i < ds->num_ports; i++) {
> +		if (dsa_to_port(ds, i)->bridge_dev != br)
> +			continue;
> +
> +		if (!dsa_is_user_port(ds, port))
> +			continue;
> +
> +		val = FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, BIT(port));
> +		ret = regmap_set_bits(regmap, AR9331_SW_REG_PORT_VLAN(i), val);
> +		if (ret)
> +			goto error;
> +
> +		if (i != port)
> +			port_mask |= BIT(i);
> +	}
> +
> +	val = FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask);
> +	ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_VLAN(port),
> +				 AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, val);
> +	if (ret)
> +		goto error;
> +
> +	return 0;
> +error:
> +	dev_err_ratelimited(priv->dev, "%s: error: %i\n", __func__, ret);

This is not called more than once per port and per bridge join operation 
so I would drop the rate limiting here. With that fixed:

Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
--
Florian