Re: [PATCH 2/2] i2c: fsi: Prevent adding adapters for ports without dts nodes

[Eddie James]

On 6/8/20 11:31 AM, Andy Shevchenko wrote:
> On Mon, Jun 8, 2020 at 7:05 PM Eddie James <eajames@xxxxxxxxxxxxx> wrote:
> > Ports should be defined in the devicetree if they are to be enabled on
> > the system.
> ...
>
> >          for (port_no = 0; port_no < ports; port_no++) {
> >                  np = fsi_i2c_find_port_of_node(dev->of_node, port_no);
> > -               if (np && !of_device_is_available(np))
> > +               /* Do not add port if it is not described in the device tree */
> > +               if (!np)
> > +                       continue;
> I believe this is redundant, since below will do the same second time.


Good point, thanks, I'll update that.


> > +               /* Do not add port if it is described as disabled */
> > +               if (!of_device_is_available(np))
> >                          continue;