Re: [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema

From: Rob Herring
Date: Fri Mar 27 2020 - 15:28:31 EST


On Tue, Mar 17, 2020 at 10:39:15AM +0100, Lubomir Rintel wrote:
> This converts the mrvl-gpio binding to DT schema format using json-schema.
>
> Various fixes were done during the conversion, such as adding more
> properties that are in fact mandatory or extending the examples to
> include child nodes with extra GPIO blocks.

Ugg, not how I would have done this. Differences in register layout
should be implied by the compatible strings. But I guess we have to live
with it now.

> The compatible strings are a mess. It is not clear why so many of them
> are needed; the driver doesn't really seem to differentiate between the
> models. Some of them, like marvell,pxa93x-gpio and marvell,pxa1928-gpio
> are not used at all, so it's not known how many interrupts they utilize.
> On the other hand, mrvl,pxa-gpio has been seen in the tree, but it
> doesn't end up in any actual DTB file.

I added pxa1928 and then work on it ended. I think it is safe to remove,
but I dug up dts file and it is 1 irq.

> In any case -- the schema merely copies whatever was in the original
> binding document, so it's hopefully no more wrong that the original.
>
> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> ---
> .../devicetree/bindings/gpio/mrvl-gpio.txt | 48 -----
> .../devicetree/bindings/gpio/mrvl-gpio.yaml | 173 ++++++++++++++++++
> 2 files changed, 173 insertions(+), 48 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> deleted file mode 100644
> index 30fd2201b3d4c..0000000000000
> --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> +++ /dev/null
> @@ -1,48 +0,0 @@
> -* Marvell PXA GPIO controller
> -
> -Required properties:
> -- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
> - "intel,pxa27x-gpio", "intel,pxa3xx-gpio",
> - "marvell,pxa93x-gpio", "marvell,mmp-gpio",
> - "marvell,mmp2-gpio" or marvell,pxa1928-gpio.
> -- reg : Address and length of the register set for the device
> -- interrupts : Should be the port interrupt shared by all gpio pins.
> - There're three gpio interrupts in arch-pxa, and they're gpio0,
> - gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
> - gpio_mux.
> -- interrupt-names : Should be the names of irq resources. Each interrupt
> - uses its own interrupt name, so there should be as many interrupt names
> - as referenced interrupts.
> -- interrupt-controller : Identifies the node as an interrupt controller.
> -- #interrupt-cells: Specifies the number of cells needed to encode an
> - interrupt source.
> -- gpio-controller : Marks the device node as a gpio controller.
> -- #gpio-cells : Should be two. The first cell is the pin number and
> - the second cell is used to specify flags. See gpio.txt for possible
> - values.
> -
> -Example for a MMP platform:
> -
> - gpio: gpio@d4019000 {
> - compatible = "marvell,mmp-gpio";
> - reg = <0xd4019000 0x1000>;
> - interrupts = <49>;
> - interrupt-names = "gpio_mux";
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <1>;
> - };
> -
> -Example for a PXA3xx platform:
> -
> - gpio: gpio@40e00000 {
> - compatible = "intel,pxa3xx-gpio";
> - reg = <0x40e00000 0x10000>;
> - interrupt-names = "gpio0", "gpio1", "gpio_mux";
> - interrupts = <8 9 10>;
> - gpio-controller;
> - #gpio-cells = <0x2>;
> - interrupt-controller;
> - #interrupt-cells = <0x2>;
> - };
> diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
> new file mode 100644
> index 0000000000000..5c713bf59b06d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
> @@ -0,0 +1,173 @@
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell PXA GPIO controller
> +
> +maintainers:
> + - devicetree@xxxxxxxxxxxxxxx

Needs to be a real person that cares about this h/w.

> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - intel,pxa25x-gpio
> + - intel,pxa26x-gpio
> + - intel,pxa27x-gpio
> + - intel,pxa3xx-gpio
> + then:
> + properties:
> + interrupts:
> + minItems: 3
> + maxItems: 3
> + interrupt-names:
> + items:
> + - const: gpio0
> + - const: gpio1
> + - const: gpio_mux
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - marvell,mmp-gpio
> + - marvell,mmp2-gpio

I'd make this an else clause.

> + then:
> + properties:
> + interrupts:
> + maxItems: 1
> + interrupt-names:
> + items:
> + - const: gpio_mux
> +
> +properties:
> + $nodename:
> + pattern: '^gpio@[0-9a-f]+$'
> +
> + compatible:
> + enum:
> + - intel,pxa25x-gpio
> + - intel,pxa26x-gpio
> + - intel,pxa27x-gpio
> + - intel,pxa3xx-gpio
> + - marvell,mmp-gpio
> + - marvell,mmp2-gpio
> + - marvell,pxa93x-gpio
> + - marvell,pxa1928-gpio
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + ranges: true
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 1
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> +
> + gpio-ranges:
> + maxItems: 1

My pxa1928 dts has this in the child nodes. Sure this is right?

> +
> + interrupts: true
> +
> + interrupt-names: true
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + const: 2
> +
> +patternProperties:
> + '^gpio@[0-9a-f]*$':
> + type: object
> + properties:
> + reg:
> + maxItems: 1
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - '#address-cells'
> + - '#size-cells'
> + - reg
> + - gpio-controller
> + - '#gpio-cells'
> + - interrupts
> + - interrupt-names
> + - interrupt-controller
> + - '#interrupt-cells'
> + - ranges
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/pxa-clock.h>
> + gpio@40e00000 {
> + compatible = "intel,pxa3xx-gpio";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x40e00000 0x10000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <8>, <9>, <10>;
> + interrupt-names = "gpio0", "gpio1", "gpio_mux";
> + clocks = <&clks CLK_GPIO>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ranges;

No child, so there should be no ranges here.

> + };
> + - |
> + #include <dt-bindings/clock/marvell,pxa910.h>
> + gpio@d4019000 {
> + compatible = "marvell,mmp-gpio";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0xd4019000 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <49>;
> + interrupt-names = "gpio_mux";
> + clocks = <&soc_clocks PXA910_CLK_GPIO>;
> + resets = <&soc_clocks PXA910_CLK_GPIO>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ranges;
> +
> + gpio@d4019000 {
> + reg = <0xd4019000 0x4>;
> + };
> +
> + gpio@d4019004 {
> + reg = <0xd4019004 0x4>;
> + };
> +
> + gpio@d4019008 {
> + reg = <0xd4019008 0x4>;
> + };
> +
> + gpio@d4019100 {
> + reg = <0xd4019100 0x4>;
> + };
> + };
> +
> +...
> --
> 2.25.1
>