Re: [RFC PATCH] Don't copy mark from encapsulated packet when routing VXLAN

[Jethro Beekman]

On 2019-10-01 17:30, Roopa Prabhu wrote:
> On Sun, Sep 29, 2019 at 11:27 PM Jethro Beekman <jethro@xxxxxxxxxxxx> wrote:
>>
>> When using rule-based routing to send traffic via VXLAN, a routing
>> loop may occur. Say you have the following routing setup:
>>
>> ip rule add from all fwmark 0x2/0x2 lookup 2
>> ip route add table 2 default via 10.244.2.0 dev vxlan1 onlink
>>
>> The intention is to route packets with mark 2 through VXLAN, and
>> this works fine. However, the current vxlan code copies the mark
>> to the encapsulated packet. Immediately after egress on the VXLAN
>> interface, the encapsulated packet is routed, with no opportunity
>> to mangle the encapsulated packet. The mark is copied from the
>> inner packet to the outer packet, and the same routing rule and
>> table shown above will apply, resulting in ELOOP.
>>
>> This patch simply doesn't copy the mark from the encapsulated packet.
>> I don't intend this code to land as is, but I want to start a
>> discussion on how to make separate routing of VXLAN inner and
>> encapsulated traffic easier.
> 
> yeah, i think the patch as is will break users who use mark to
> influence the underlay route lookup.
> When you say the mark is copied into the packet, what exactly are you
> seeing and where is the copy happening ?
> 

Maybe the mark isn't actually copied? At least it's used in the route lookup as shown in the patch.

--
Jethro Beekman | Fortanix

> 
> 
>>
>> Signed-off-by: Jethro Beekman <jethro@xxxxxxxxxxxx>
>> ---
>>  drivers/net/vxlan.c | 2 --
>>  1 file changed, 2 deletions(-)
>>
>> diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
>> index 3d9bcc9..f9ed1b7 100644
>> --- a/drivers/net/vxlan.c
>> +++ b/drivers/net/vxlan.c
>> @@ -2236,7 +2236,6 @@ static struct rtable *vxlan_get_route(struct vxlan_dev *vxlan, struct net_device
>>         memset(&fl4, 0, sizeof(fl4));
>>         fl4.flowi4_oif = oif;
>>         fl4.flowi4_tos = RT_TOS(tos);
>> -       fl4.flowi4_mark = skb->mark;
>>         fl4.flowi4_proto = IPPROTO_UDP;
>>         fl4.daddr = daddr;
>>         fl4.saddr = *saddr;
>> @@ -2294,7 +2293,6 @@ static struct dst_entry *vxlan6_get_route(struct vxlan_dev *vxlan,
>>         fl6.daddr = *daddr;
>>         fl6.saddr = *saddr;
>>         fl6.flowlabel = ip6_make_flowinfo(RT_TOS(tos), label);
>> -       fl6.flowi6_mark = skb->mark;
>>         fl6.flowi6_proto = IPPROTO_UDP;
>>         fl6.fl6_dport = dport;
>>         fl6.fl6_sport = sport;
>> --
>> 2.7.4
>>
>>

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature