[PATCH 09/15] arm64: dts: msm8996: thermal: Add interrupt support

From: Amit Kucheria
Date: Thu Jul 25 2019 - 18:19:34 EST


Register upper-lower interrupts for each of the two tsens controllers.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 60 ++++++++++++++-------------
1 file changed, 32 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 96c0a481f454..7325eba42d19 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -175,8 +175,8 @@

thermal-zones {
cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 3>;

@@ -196,8 +196,8 @@
};

cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 5>;

@@ -217,8 +217,8 @@
};

cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 8>;

@@ -238,8 +238,8 @@
};

cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 10>;

@@ -259,8 +259,8 @@
};

gpu-thermal-top {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 6>;

@@ -274,8 +274,8 @@
};

gpu-thermal-bottom {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 7>;

@@ -289,8 +289,8 @@
};

m4m-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 1>;

@@ -304,8 +304,8 @@
};

l3-or-venus-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 2>;

@@ -319,8 +319,8 @@
};

cluster0-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 7>;

@@ -334,8 +334,8 @@
};

cluster1-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 12>;

@@ -349,8 +349,8 @@
};

camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 1>;

@@ -364,8 +364,8 @@
};

q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 2>;

@@ -379,8 +379,8 @@
};

mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 3>;

@@ -394,8 +394,8 @@
};

modemtx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 4>;

@@ -591,6 +591,8 @@
reg = <0x4a9000 0x1000>, /* TM */
<0x4a8000 0x1000>; /* SROT */
#qcom,sensors = <13>;
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tsens0";
#thermal-sensor-cells = <1>;
};

@@ -599,6 +601,8 @@
reg = <0x4ad000 0x1000>, /* TM */
<0x4ac000 0x1000>; /* SROT */
#qcom,sensors = <8>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tsens1";
#thermal-sensor-cells = <1>;
};

--
2.17.1