[PATCH 08/15] arm64: dts: sdm845: thermal: Add interrupt support

From: Amit Kucheria
Date: Thu Jul 25 2019 - 18:19:31 EST


Register upper-lower interrupts for each of the two tsens controllers.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 88 +++++++++++++++-------------
1 file changed, 46 insertions(+), 42 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 4babff5f19b5..43c06e54b69d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2386,6 +2386,8 @@
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x1ff>; /* SROT */
#qcom,sensors = <13>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tsens0";
#thermal-sensor-cells = <1>;
};

@@ -2394,6 +2396,8 @@
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x1ff>; /* SROT */
#qcom,sensors = <8>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tsens1";
#thermal-sensor-cells = <1>;
};

@@ -2712,8 +2716,8 @@

thermal-zones {
cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 1>;

@@ -2756,8 +2760,8 @@
};

cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 2>;

@@ -2800,8 +2804,8 @@
};

cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 3>;

@@ -2844,8 +2848,8 @@
};

cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 4>;

@@ -2888,8 +2892,8 @@
};

cpu4-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 7>;

@@ -2932,8 +2936,8 @@
};

cpu5-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 8>;

@@ -2976,8 +2980,8 @@
};

cpu6-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 9>;

@@ -3020,8 +3024,8 @@
};

cpu7-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 10>;

@@ -3064,8 +3068,8 @@
};

aoss0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 0>;

@@ -3079,8 +3083,8 @@
};

cluster0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 5>;

@@ -3099,8 +3103,8 @@
};

cluster1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 6>;

@@ -3119,8 +3123,8 @@
};

gpu-thermal-top {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 11>;

@@ -3134,8 +3138,8 @@
};

gpu-thermal-bottom {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens0 12>;

@@ -3149,8 +3153,8 @@
};

aoss1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 0>;

@@ -3164,8 +3168,8 @@
};

q6-modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 1>;

@@ -3179,8 +3183,8 @@
};

mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 2>;

@@ -3194,8 +3198,8 @@
};

wlan-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 3>;

@@ -3209,8 +3213,8 @@
};

q6-hvx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 4>;

@@ -3224,8 +3228,8 @@
};

camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 5>;

@@ -3239,8 +3243,8 @@
};

video-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 6>;

@@ -3254,8 +3258,8 @@
};

modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;

thermal-sensors = <&tsens1 7>;

--
2.17.1