Re: [PATCH v4] platform: chrome: Add ChromeOS EC ISHTP driver

From: Srinivas Pandruvada
Date: Wed Apr 17 2019 - 12:27:36 EST


On Wed, 2019-04-17 at 15:48 +0530, Rushikesh S Kadam wrote:
> This driver implements a slim layer to enable the ChromeOS
> EC kernel stack (cros_ec) to communicate with ChromeOS EC
> firmware running on the Intel Integrated Sensor Hub (ISH).
>
> The driver registers a ChromeOS EC MFD device to connect
> with cros_ec kernel stack (upper layer), and it registers a
> client with the ISH Transport Protocol bus (lower layer) to
> talk with the ISH firwmare. See description of the ISHTP
> protocol at Documentation/hid/intel-ish-hid.txt
>
> Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@xxxxxxxxx>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>

I think you have some reviewed and tested by.

Also copy to Jiri, as this may have to go via HID pull as this has
dependency.

Thanks,
Srinivas

> ---
> The patches are baselined to hid git tree, branch for-5.2/ish
>
https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git/log/?h=for-5.2/ish
>
> v4
> - Coding style related changes. No functional changes. Addresses
> review comments on v3.
>
> v3
> - Made several changes to improve code readability. Replaced
> multiple cl_data_to_dev(client_data) with dev variable. Use
> reverse Xmas tree for variable defintion where it made sense.
> Dropped few debug prints. Add docstring for function
> prepare_cros_ec_rx().
> - Fix code in function prepare_cros_ec_rx() under label
> end_cros_ec_dev_init_error.
> - Recycle buffer in process_recv() on failing to obtain the
> semaphore.
> - Increase ISHTP TX/RX ring buffer size to 8.
> - Alphabetically ordered CROS_EC_ISHTP entries in Makefile and
> Kconfig.
> - Updated commit message.
>
> v2
> - Dropped unused "reset" parameter in function cros_ec_init()
> - Change driver name to cros_ec_ishtp to be consistent with other
> references in the code.
> - Fixed a few typos.
>
> v1
> - Initial version
>
> drivers/platform/chrome/Kconfig | 13 +
> drivers/platform/chrome/Makefile | 1 +
> drivers/platform/chrome/cros_ec_ishtp.c | 763
> ++++++++++++++++++++++++++++++++
> 3 files changed, 777 insertions(+)
> create mode 100644 drivers/platform/chrome/cros_ec_ishtp.c
>
> diff --git a/drivers/platform/chrome/Kconfig
> b/drivers/platform/chrome/Kconfig
> index 16b1615..5848179 100644
> --- a/drivers/platform/chrome/Kconfig
> +++ b/drivers/platform/chrome/Kconfig
> @@ -62,6 +62,19 @@ config CROS_EC_I2C
> a checksum. Failing accesses will be retried three times to
> improve reliability.
>
> +config CROS_EC_ISHTP
> + tristate "ChromeOS Embedded Controller (ISHTP)"
> + depends on MFD_CROS_EC
> + depends on INTEL_ISH_HID
> + help
> + If you say Y here, you get support for talking to the
> ChromeOS EC
> + firmware running on Intel Integrated Sensor Hub (ISH), using
> the
> + ISH Transport protocol (ISH-TP). This uses a simple byte-
> level
> + protocol with a checksum.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called cros_ec_ishtp.
> +
> config CROS_EC_SPI
> tristate "ChromeOS Embedded Controller (SPI)"
> depends on MFD_CROS_EC && SPI
> diff --git a/drivers/platform/chrome/Makefile
> b/drivers/platform/chrome/Makefile
> index cd591bf..4efe102 100644
> --- a/drivers/platform/chrome/Makefile
> +++ b/drivers/platform/chrome/Makefile
> @@ -7,6 +7,7 @@ cros_ec_ctl-objs :=
> cros_ec_sysfs.o cros_ec_lightbar.o \
> cros_ec_vbc.o
> cros_ec_debugfs.o
> obj-$(CONFIG_CROS_EC_CTL) += cros_ec_ctl.o
> obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o
> +obj-$(CONFIG_CROS_EC_ISHTP) += cros_ec_ishtp.o
> obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
> cros_ec_lpcs-objs := cros_ec_lpc.o
> cros_ec_lpc_reg.o
> cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o
> diff --git a/drivers/platform/chrome/cros_ec_ishtp.c
> b/drivers/platform/chrome/cros_ec_ishtp.c
> new file mode 100644
> index 0000000..997503d
> --- /dev/null
> +++ b/drivers/platform/chrome/cros_ec_ishtp.c
> @@ -0,0 +1,763 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// ISHTP interface for ChromeOS Embedded Controller
> +//
> +// Copyright (c) 2019, Intel Corporation.
> +//
> +// ISHTP client driver for talking to the Chrome OS EC firmware
> running
> +// on Intel Integrated Sensor Hub (ISH) using the ISH Transport
> protocol
> +// (ISH-TP).
> +
> +#include <linux/delay.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/cros_ec.h>
> +#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/intel-ish-client-if.h>
> +
> +/*
> + * ISH TX/RX ring buffer pool size
> + *
> + * The AP->ISH messages and corresponding ISH->AP responses are
> + * serialized. We need 1 TX and 1 RX buffer for these.
> + *
> + * The MKBP ISH->AP events are serialized. We need one additional RX
> + * buffer for them.
> + */
> +#define CROS_ISH_CL_TX_RING_SIZE 8
> +#define CROS_ISH_CL_RX_RING_SIZE 8
> +
> +/* ISH CrOS EC Host Commands */
> +enum cros_ec_ish_channel {
> + CROS_EC_COMMAND = 1, /* AP->ISH message */
> + CROS_MKBP_EVENT = 2, /* ISH->AP events */
> +};
> +
> +/*
> + * ISH firmware timeout for 1 message send failure is 1Hz, and the
> + * firmware will retry 2 times, so 3Hz is used for timeout.
> + */
> +#define ISHTP_SEND_TIMEOUT (3 * HZ)
> +
> +/* ISH Transport CrOS EC ISH client unique GUID */
> +static const guid_t cros_ish_guid =
> + GUID_INIT(0x7b7154d0, 0x56f4, 0x4bdc,
> + 0xb0, 0xd8, 0x9e, 0x7c, 0xda, 0xe0, 0xd6, 0xa0);
> +
> +struct header {
> + u8 channel;
> + u8 status;
> + u8 reserved[2];
> +} __packed;
> +
> +struct cros_ish_out_msg {
> + struct header hdr;
> + struct ec_host_request ec_request;
> +} __packed;
> +
> +struct cros_ish_in_msg {
> + struct header hdr;
> + struct ec_host_response ec_response;
> +} __packed;
> +
> +#define IN_MSG_EC_RESPONSE_PREAMBLE
> \
> + offsetof(struct cros_ish_in_msg, ec_response)
> +
> +#define OUT_MSG_EC_REQUEST_PREAMBLE
> \
> + offsetof(struct cros_ish_out_msg, ec_request)
> +
> +#define cl_data_to_dev(client_data) ishtp_device((client_data)-
> >cl_device)
> +
> +/*
> + * The Read-Write Semaphore is used to prevent message TX or RX
> while
> + * the ishtp client is being initialized or undergoing reset.
> + *
> + * The readers are the kernel function calls responsible for IA->ISH
> + * and ISH->AP messaging.
> + *
> + * The writers are .reset() and .probe() function.
> + */
> +DECLARE_RWSEM(init_lock);
> +
> +/**
> + * struct response_info - Encapsulate firmware response related
> + * information for passing between function ish_send() and
> + * process_recv() callback.
> + *
> + * @data: Copy the data received from firmware here.
> + * @max_size: Max size allocated for the @data buffer. If the
> received
> + * data exceeds this value, we log an error.
> + * @size: Actual size of data received from firmware.
> + * @error: 0 for success, negative error code for a failure in
> process_recv().
> + * @received: Set to true on receiving a valid firmware respons
> e to host command
> + * @wait_queue: Wait queue for host to wait for firmware response.
> + */
> +struct response_info {
> + void *data;
> + size_t max_size;
> + size_t size;
> + int error;
> + bool received;
> + wait_queue_head_t wait_queue;
> +};
> +
> +/**
> + * struct ishtp_cl_data - Encapsulate per ISH TP Client.
> + *
> + * @cros_ish_cl: ISHTP firmware client instance.
> + * @cl_device: ISHTP client device instance.
> + * @response: Response info passing between ish_send() and
> process_recv().
> + * @work_ishtp_reset: Work queue reset handling.
> + * @work_ec_evt: Work queue for EC events.
> + * @ec_dev: CrOS EC MFD device.
> + *
> + * This structure is used to store per client data.
> + */
> +struct ishtp_cl_data {
> + struct ishtp_cl *cros_ish_cl;
> + struct ishtp_cl_device *cl_device;
> +
> + /*
> + * Used for passing firmware response information between
> + * ish_send() and process_recv() callback.
> + */
> + struct response_info response;
> +
> + struct work_struct work_ishtp_reset;
> + struct work_struct work_ec_evt;
> + struct cros_ec_device *ec_dev;
> +};
> +
> +/**
> + * ish_evt_handler - ISH to AP event handler
> + * @work: Work struct
> + */
> +static void ish_evt_handler(struct work_struct *work)
> +{
> + struct ishtp_cl_data *client_data =
> + container_of(work, struct ishtp_cl_data, work_ec_evt);
> + struct cros_ec_device *ec_dev = client_data->ec_dev;
> +
> + if (cros_ec_get_next_event(ec_dev, NULL) > 0) {
> + blocking_notifier_call_chain(&ec_dev->event_notifier,
> + 0, ec_dev);
> + }
> +}
> +
> +/**
> + * ish_send() - Send message from host to firmware
> + *
> + * @client_data: Client data instance
> + * @out_msg: Message buffer to be sent to firmware
> + * @out_size: Size of out going message
> + * @in_msg: Message buffer where the incoming data is copied. This
> buffer
> + * is allocated by calling
> + * @in_size: Max size of incoming message
> + *
> + * Return: Number of bytes copied in the in_msg on success, negative
> + * error code on failure.
> + */
> +static int ish_send(struct ishtp_cl_data *client_data,
> + u8 *out_msg, size_t out_size,
> + u8 *in_msg, size_t in_size)
> +{
> + int rv;
> + struct header *out_hdr = (struct header *)out_msg;
> + struct ishtp_cl *cros_ish_cl = client_data->cros_ish_cl;
> +
> + dev_dbg(cl_data_to_dev(client_data),
> + "%s: channel=%02u status=%02u\n",
> + __func__, out_hdr->channel, out_hdr->status);
> +
> + /* Setup for incoming response */
> + client_data->response.data = in_msg;
> + client_data->response.max_size = in_size;
> + client_data->response.error = 0;
> + client_data->response.received = false;
> +
> + rv = ishtp_cl_send(cros_ish_cl, out_msg, out_size);
> + if (rv) {
> + dev_err(cl_data_to_dev(client_data),
> + "ishtp_cl_send error %d\n", rv);
> + return rv;
> + }
> +
> + wait_event_interruptible_timeout(client_data-
> >response.wait_queue,
> + client_data-
> >response.received,
> + ISHTP_SEND_TIMEOUT);
> + if (!client_data->response.received) {
> + dev_err(cl_data_to_dev(client_data),
> + "Timed out for response to host message\n");
> + return -ETIMEDOUT;
> + }
> +
> + if (client_data->response.error < 0)
> + return client_data->response.error;
> +
> + return client_data->response.size;
> +}
> +
> +/**
> + * process_recv() - Received and parse incoming packet
> + * @cros_ish_cl: Client instance to get stats
> + * @rb_in_proc: Host interface message buffer
> + *
> + * Parse the incoming packet. If it is a response packet then it
> will
> + * update per instance flags and wake up the caller waiting to for
> the
> + * response. If it is an event packet then it will schedule event
> work.
> + */
> +static void process_recv(struct ishtp_cl *cros_ish_cl,
> + struct ishtp_cl_rb *rb_in_proc)
> +{
> + size_t data_len = rb_in_proc->buf_idx;
> + struct ishtp_cl_data *client_data =
> + ishtp_get_client_data(cros_ish_cl);
> + struct device *dev = cl_data_to_dev(client_data);
> + struct cros_ish_in_msg *in_msg =
> + (struct cros_ish_in_msg *)rb_in_proc->buffer.data;
> +
> + /* Proceed only if reset or init is not in progress */
> + if (!down_read_trylock(&init_lock)) {
> + /* Free the buffer */
> + ishtp_cl_io_rb_recycle(rb_in_proc);
> + dev_warn(dev,
> + "Host is not ready to receive incoming
> messages\n");
> + return;
> + }
> +
> + /*
> + * All firmware messages contain a header. Check the buffer
> size
> + * before accessing elements inside.
> + */
> + if (!rb_in_proc->buffer.data) {
> + dev_warn(dev, "rb_in_proc->buffer.data returned null");
> + client_data->response.error = -EBADMSG;
> + goto end_error;
> + }
> +
> + if (data_len < sizeof(struct header)) {
> + dev_err(dev, "data size %zu is less than header %zu\n",
> + data_len, sizeof(struct header));
> + client_data->response.error = -EMSGSIZE;
> + goto end_error;
> + }
> +
> + dev_dbg(dev, "channel=%02u status=%02u\n",
> + in_msg->hdr.channel, in_msg->hdr.status);
> +
> + switch (in_msg->hdr.channel) {
> + case CROS_EC_COMMAND:
> + /* Sanity check */
> + if (!client_data->response.data) {
> + dev_err(dev,
> + "Receiving buffer is null. Should be
> allocated by calling function\n");
> + client_data->response.error = -EINVAL;
> + goto error_wake_up;
> + }
> +
> + if (client_data->response.received) {
> + dev_err(dev,
> + "Previous firmware message not yet
> processed\n");
> + client_data->response.error = -EINVAL;
> + goto error_wake_up;
> + }
> +
> + if (data_len > client_data->response.max_size) {
> + dev_err(dev,
> + "Received buffer size %zu is larger
> than allocated buffer %zu\n",
> + data_len, client_data-
> >response.max_size);
> + client_data->response.error = -EMSGSIZE;
> + goto error_wake_up;
> + }
> +
> + if (in_msg->hdr.status) {
> + dev_err(dev, "firmware returned status %d\n",
> + in_msg->hdr.status);
> + client_data->response.error = -EIO;
> + goto error_wake_up;
> + }
> +
> + /* Update the actual received buffer size */
> + client_data->response.size = data_len;
> +
> + /*
> + * Copy the buffer received in firmware response for
> the
> + * calling thread.
> + */
> + memcpy(client_data->response.data,
> + rb_in_proc->buffer.data, data_len);
> +
> + /* Set flag before waking up the caller */
> + client_data->response.received = true;
> +error_wake_up:
> + /* Wake the calling thread */
> + wake_up_interruptible(&client_data-
> >response.wait_queue);
> +
> + break;
> +
> + case CROS_MKBP_EVENT:
> + /* The event system doesn't send any data in buffer */
> + schedule_work(&client_data->work_ec_evt);
> +
> + break;
> +
> + default:
> + dev_err(dev, "Invalid channel=%02d\n", in_msg-
> >hdr.channel);
> + }
> +
> +end_error:
> + /* Free the buffer */
> + ishtp_cl_io_rb_recycle(rb_in_proc);
> +
> + up_read(&init_lock);
> +}
> +
> +/**
> + * ish_event_cb() - bus driver callback for incoming message
> + * @cl_device: ISHTP client device for which this message is
> targeted.
> + *
> + * Remove the packet from the list and process the message by
> calling
> + * process_recv.
> + */
> +static void ish_event_cb(struct ishtp_cl_device *cl_device)
> +{
> + struct ishtp_cl_rb *rb_in_proc;
> + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
> +
> + while ((rb_in_proc = ishtp_cl_rx_get_rb(cros_ish_cl)) != NULL)
> {
> + /* Decide what to do with received data */
> + process_recv(cros_ish_cl, rb_in_proc);
> + }
> +}
> +
> +/**
> + * cros_ish_init() - Init function for ISHTP client
> + * @cros_ish_cl: ISHTP client instance
> + *
> + * This function complete the initializtion of the client.
> + *
> + * Return: 0 for success, negative error code for failure.
> + */
> +static int cros_ish_init(struct ishtp_cl *cros_ish_cl)
> +{
> + int rv;
> + struct ishtp_device *dev;
> + struct ishtp_fw_client *fw_client;
> + struct ishtp_cl_data *client_data =
> ishtp_get_client_data(cros_ish_cl);
> +
> + rv = ishtp_cl_link(cros_ish_cl);
> + if (rv) {
> + dev_err(cl_data_to_dev(client_data),
> + "ishtp_cl_link failed\n");
> + return rv;
> + }
> +
> + dev = ishtp_get_ishtp_device(cros_ish_cl);
> +
> + /* Connect to firmware client */
> + ishtp_set_tx_ring_size(cros_ish_cl, CROS_ISH_CL_TX_RING_SIZE);
> + ishtp_set_rx_ring_size(cros_ish_cl, CROS_ISH_CL_RX_RING_SIZE);
> +
> + fw_client = ishtp_fw_cl_get_client(dev, &cros_ish_guid);
> + if (!fw_client) {
> + dev_err(cl_data_to_dev(client_data),
> + "ish client uuid not found\n");
> + rv = -ENOENT;
> + goto err_cl_unlink;
> + }
> +
> + ishtp_cl_set_fw_client_id(cros_ish_cl,
> + ishtp_get_fw_client_id(fw_client));
> + ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_CONNECTING);
> +
> + rv = ishtp_cl_connect(cros_ish_cl);
> + if (rv) {
> + dev_err(cl_data_to_dev(client_data),
> + "client connect fail\n");
> + goto err_cl_unlink;
> + }
> +
> + ishtp_register_event_cb(client_data->cl_device, ish_event_cb);
> + return 0;
> +
> +err_cl_unlink:
> + ishtp_cl_unlink(cros_ish_cl);
> + return rv;
> +}
> +
> +/**
> + * cros_ish_deinit() - Deinit function for ISHTP client
> + * @cros_ish_cl: ISHTP client instance
> + *
> + * Unlink and free cros_ec client
> + */
> +static void cros_ish_deinit(struct ishtp_cl *cros_ish_cl)
> +{
> + ishtp_set_connection_state(cros_ish_cl,
> ISHTP_CL_DISCONNECTING);
> + ishtp_cl_disconnect(cros_ish_cl);
> + ishtp_cl_unlink(cros_ish_cl);
> + ishtp_cl_flush_queues(cros_ish_cl);
> +
> + /* Disband and free all Tx and Rx client-level rings */
> + ishtp_cl_free(cros_ish_cl);
> +}
> +
> +/**
> + * prepare_cros_ec_rx() - Check & prepare receive buffer
> + * @ec_dev: CrOS EC MFD device.
> + * @in_msg: Incoming message buffer
> + * @msg: cros_ec command used to send & receive data
> + *
> + * Return: 0 for success, negative error code for failure.
> + *
> + * Check the received buffer. Convert to cros_ec_command format.
> + */
> +static int prepare_cros_ec_rx(struct cros_ec_device *ec_dev,
> + const struct cros_ish_in_msg *in_msg,
> + struct cros_ec_command *msg)
> +{
> + u8 sum = 0;
> + int i, rv, offset;
> +
> + /* Check response error code */
> + msg->result = in_msg->ec_response.result;
> + rv = cros_ec_check_result(ec_dev, msg);
> + if (rv < 0)
> + return rv;
> +
> + if (in_msg->ec_response.data_len > msg->insize) {
> + dev_err(ec_dev->dev, "Packet too long (%d bytes,
> expected %d)",
> + in_msg->ec_response.data_len, msg->insize);
> + return -ENOSPC;
> + }
> +
> + /* Copy response packet payload and compute checksum */
> + for (i = 0; i < sizeof(struct ec_host_response); i++)
> + sum += ((u8 *)in_msg)[IN_MSG_EC_RESPONSE_PREAMBLE + i];
> +
> + offset = sizeof(struct cros_ish_in_msg);
> + for (i = 0; i < in_msg->ec_response.data_len; i++)
> + sum += msg->data[i] = ((u8 *)in_msg)[offset + i];
> +
> + if (sum) {
> + dev_dbg(ec_dev->dev, "Bad received packet checksum
> %d\n", sum);
> + return -EBADMSG;
> + }
> +
> + return 0;
> +}
> +
> +static int cros_ec_pkt_xfer_ish(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg)
> +{
> + int rv;
> + struct ishtp_cl *cros_ish_cl = ec_dev->priv;
> + struct ishtp_cl_data *client_data =
> ishtp_get_client_data(cros_ish_cl);
> + struct device *dev = cl_data_to_dev(client_data);
> + struct cros_ish_in_msg *in_msg = (struct cros_ish_in_msg
> *)ec_dev->din;
> + struct cros_ish_out_msg *out_msg =
> + (struct cros_ish_out_msg *)ec_dev->dout;
> + size_t in_size = sizeof(struct cros_ish_in_msg) + msg->insize;
> + size_t out_size = sizeof(struct cros_ish_out_msg) + msg-
> >outsize;
> +
> + /* Proceed only if reset-init is not in progress */
> + if (!down_read_trylock(&init_lock)) {
> + dev_warn(dev,
> + "Host is not ready to send messages to ISH.
> Try again\n");
> + return -EAGAIN;
> + }
> +
> + /* Sanity checks */
> + if (in_size > ec_dev->din_size) {
> + dev_err(dev,
> + "Incoming payload size %zu is too large for
> ec_dev->din_size %d\n",
> + in_size, ec_dev->din_size);
> + return -EMSGSIZE;
> + }
> +
> + if (out_size > ec_dev->dout_size) {
> + dev_err(dev,
> + "Outgoing payload size %zu is too large for
> ec_dev->dout_size %d\n",
> + out_size, ec_dev->dout_size);
> + return -EMSGSIZE;
> + }
> +
> + /* Prepare the package to be sent over ISH TP */
> + out_msg->hdr.channel = CROS_EC_COMMAND;
> + out_msg->hdr.status = 0;
> +
> + ec_dev->dout += OUT_MSG_EC_REQUEST_PREAMBLE;
> + cros_ec_prepare_tx(ec_dev, msg);
> + ec_dev->dout -= OUT_MSG_EC_REQUEST_PREAMBLE;
> +
> + dev_dbg(dev,
> + "out_msg: struct_ver=0x%x checksum=0x%x command=0x%x
> command_ver=0x%x data_len=0x%x\n",
> + out_msg->ec_request.struct_version,
> + out_msg->ec_request.checksum,
> + out_msg->ec_request.command,
> + out_msg->ec_request.command_version,
> + out_msg->ec_request.data_len);
> +
> + /* Send command to ISH EC firmware and read response */
> + rv = ish_send(client_data,
> + (u8 *)out_msg, out_size,
> + (u8 *)in_msg, in_size);
> + if (rv < 0)
> + goto end_error;
> +
> + rv = prepare_cros_ec_rx(ec_dev, in_msg, msg);
> + if (rv)
> + goto end_error;
> +
> + rv = in_msg->ec_response.data_len;
> +
> + dev_dbg(dev,
> + "in_msg: struct_ver=0x%x checksum=0x%x result=0x%x
> data_len=0x%x\n",
> + in_msg->ec_response.struct_version,
> + in_msg->ec_response.checksum,
> + in_msg->ec_response.result,
> + in_msg->ec_response.data_len);
> +
> +end_error:
> + if (msg->command == EC_CMD_REBOOT_EC)
> + msleep(EC_REBOOT_DELAY_MS);
> +
> + up_read(&init_lock);
> +
> + return rv;
> +}
> +
> +static int cros_ec_dev_init(struct ishtp_cl_data *client_data)
> +{
> + struct cros_ec_device *ec_dev;
> + struct device *dev = cl_data_to_dev(client_data);
> +
> + ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
> + if (!ec_dev)
> + return -ENOMEM;
> +
> + client_data->ec_dev = ec_dev;
> + dev->driver_data = ec_dev;
> +
> + ec_dev->dev = dev;
> + ec_dev->priv = client_data->cros_ish_cl;
> + ec_dev->cmd_xfer = NULL;
> + ec_dev->pkt_xfer = cros_ec_pkt_xfer_ish;
> + ec_dev->phys_name = dev_name(dev);
> + ec_dev->din_size = sizeof(struct cros_ish_in_msg) +
> + sizeof(struct
> ec_response_get_protocol_info);
> + ec_dev->dout_size = sizeof(struct cros_ish_out_msg);
> +
> + return cros_ec_register(ec_dev);
> +}
> +
> +static void reset_handler(struct work_struct *work)
> +{
> + int rv;
> + struct device *dev;
> + struct ishtp_cl *cros_ish_cl;
> + struct ishtp_cl_device *cl_device;
> + struct ishtp_cl_data *client_data =
> + container_of(work, struct ishtp_cl_data,
> work_ishtp_reset);
> +
> + /* Lock for reset to complete */
> + down_write(&init_lock);
> +
> + cros_ish_cl = client_data->cros_ish_cl;
> + cl_device = client_data->cl_device;
> +
> + /* Unlink, flush queues & start again */
> + ishtp_cl_unlink(cros_ish_cl);
> + ishtp_cl_flush_queues(cros_ish_cl);
> + ishtp_cl_free(cros_ish_cl);
> +
> + cros_ish_cl = ishtp_cl_allocate(cl_device);
> + if (!cros_ish_cl) {
> + up_write(&init_lock);
> + return;
> + }
> +
> + ishtp_set_drvdata(cl_device, cros_ish_cl);
> + ishtp_set_client_data(cros_ish_cl, client_data);
> + client_data->cros_ish_cl = cros_ish_cl;
> +
> + rv = cros_ish_init(cros_ish_cl);
> + if (rv) {
> + ishtp_cl_free(cros_ish_cl);
> + dev_err(cl_data_to_dev(client_data), "Reset Failed\n");
> + up_write(&init_lock);
> + return;
> + }
> +
> + /* Refresh ec_dev device pointers */
> + client_data->ec_dev->priv = client_data->cros_ish_cl;
> + dev = cl_data_to_dev(client_data);
> + dev->driver_data = client_data->ec_dev;
> +
> + dev_info(cl_data_to_dev(client_data), "Chrome EC ISH reset
> done\n");
> +
> + up_write(&init_lock);
> +}
> +
> +/**
> + * cros_ec_ishtp_probe() - ISHTP client driver probe callback
> + * @cl_device: ISHTP client device instance
> + *
> + * Return: 0 for success, negative error code for failure.
> + */
> +static int cros_ec_ishtp_probe(struct ishtp_cl_device *cl_device)
> +{
> + int rv;
> + struct ishtp_cl *cros_ish_cl;
> + struct ishtp_cl_data *client_data =
> + devm_kzalloc(ishtp_device(cl_device),
> + sizeof(*client_data), GFP_KERNEL);
> + if (!client_data)
> + return -ENOMEM;
> +
> + /* Lock for initialization to complete */
> + down_write(&init_lock);
> +
> + cros_ish_cl = ishtp_cl_allocate(cl_device);
> + if (!cros_ish_cl) {
> + rv = -ENOMEM;
> + goto end_ishtp_cl_alloc_error;
> + }
> +
> + ishtp_set_drvdata(cl_device, cros_ish_cl);
> + ishtp_set_client_data(cros_ish_cl, client_data);
> + client_data->cros_ish_cl = cros_ish_cl;
> + client_data->cl_device = cl_device;
> +
> + init_waitqueue_head(&client_data->response.wait_queue);
> +
> + INIT_WORK(&client_data->work_ishtp_reset,
> + reset_handler);
> + INIT_WORK(&client_data->work_ec_evt,
> + ish_evt_handler);
> +
> + rv = cros_ish_init(cros_ish_cl);
> + if (rv)
> + goto end_ishtp_cl_init_error;
> +
> + ishtp_get_device(cl_device);
> +
> + up_write(&init_lock);
> +
> + /* Register croc_ec_dev mfd */
> + rv = cros_ec_dev_init(client_data);
> + if (rv)
> + goto end_cros_ec_dev_init_error;
> +
> + return 0;
> +
> +end_cros_ec_dev_init_error:
> + ishtp_set_connection_state(cros_ish_cl,
> ISHTP_CL_DISCONNECTING);
> + ishtp_cl_disconnect(cros_ish_cl);
> + ishtp_cl_unlink(cros_ish_cl);
> + ishtp_cl_flush_queues(cros_ish_cl);
> + ishtp_put_device(cl_device);
> +end_ishtp_cl_init_error:
> + ishtp_cl_free(cros_ish_cl);
> +end_ishtp_cl_alloc_error:
> + up_write(&init_lock);
> + return rv;
> +}
> +
> +/**
> + * cros_ec_ishtp_remove() - ISHTP client driver remove callback
> + * @cl_device: ISHTP client device instance
> + *
> + * Return: 0
> + */
> +static int cros_ec_ishtp_remove(struct ishtp_cl_device *cl_device)
> +{
> + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
> + struct ishtp_cl_data *client_data =
> ishtp_get_client_data(cros_ish_cl);
> +
> + cancel_work_sync(&client_data->work_ishtp_reset);
> + cancel_work_sync(&client_data->work_ec_evt);
> + cros_ish_deinit(cros_ish_cl);
> + ishtp_put_device(cl_device);
> +
> + return 0;
> +}
> +
> +/**
> + * cros_ec_ishtp_reset() - ISHTP client driver reset callback
> + * @cl_device: ISHTP client device instance
> + *
> + * Return: 0
> + */
> +static int cros_ec_ishtp_reset(struct ishtp_cl_device *cl_device)
> +{
> + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
> + struct ishtp_cl_data *client_data =
> ishtp_get_client_data(cros_ish_cl);
> +
> + schedule_work(&client_data->work_ishtp_reset);
> +
> + return 0;
> +}
> +
> +/**
> + * cros_ec_ishtp_suspend() - ISHTP client driver suspend callback
> + * @device: device instance
> + *
> + * Return: 0 for success, negative error code for failure.
> + */
> +static int __maybe_unused cros_ec_ishtp_suspend(struct device
> *device)
> +{
> + struct ishtp_cl_device *cl_device = dev_get_drvdata(device);
> + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
> + struct ishtp_cl_data *client_data =
> ishtp_get_client_data(cros_ish_cl);
> +
> + return cros_ec_suspend(client_data->ec_dev);
> +}
> +
> +/**
> + * cros_ec_ishtp_resume() - ISHTP client driver resume callback
> + * @device: device instance
> + *
> + * Return: 0 for success, negative error code for failure.
> + */
> +static int __maybe_unused cros_ec_ishtp_resume(struct device
> *device)
> +{
> + struct ishtp_cl_device *cl_device = dev_get_drvdata(device);
> + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
> + struct ishtp_cl_data *client_data =
> ishtp_get_client_data(cros_ish_cl);
> +
> + return cros_ec_resume(client_data->ec_dev);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(cros_ec_ishtp_pm_ops,
> cros_ec_ishtp_suspend,
> + cros_ec_ishtp_resume);
> +
> +static struct ishtp_cl_driver cros_ec_ishtp_driver = {
> + .name = "cros_ec_ishtp",
> + .guid = &cros_ish_guid,
> + .probe = cros_ec_ishtp_probe,
> + .remove = cros_ec_ishtp_remove,
> + .reset = cros_ec_ishtp_reset,
> + .driver = {
> + .pm = &cros_ec_ishtp_pm_ops,
> + },
> +};
> +
> +static int __init cros_ec_ishtp_mod_init(void)
> +{
> + return ishtp_cl_driver_register(&cros_ec_ishtp_driver,
> THIS_MODULE);
> +}
> +
> +static void __exit cros_ec_ishtp_mod_exit(void)
> +{
> + ishtp_cl_driver_unregister(&cros_ec_ishtp_driver);
> +}
> +
> +module_init(cros_ec_ishtp_mod_init);
> +module_exit(cros_ec_ishtp_mod_exit);
> +
> +MODULE_DESCRIPTION("ChromeOS EC ISHTP Client Driver");
> +MODULE_AUTHOR("Rushikesh S Kadam <rushikesh.s.kadam@xxxxxxxxx>");
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("ishtp:*");