RE: [PATCH] clk: imx6ull: use OSC clock during AXI rate change

From: Jacky Bai
Date: Wed May 09 2018 - 21:53:24 EST


> Subject: Re: [PATCH] clk: imx6ull: use OSC clock during AXI rate change
>
> On 09.05.2018 03:26, Jacky Bai wrote:
> >> Subject: Re: [PATCH] clk: imx6ull: use OSC clock during AXI rate
> >> change
> >>
> >> Quoting Stefan Agner (2018-05-08 06:20:03)
> >> > On 08.05.2018 09:32, Jacky Bai wrote:
> >> > >
> >> > > I have tried two 6ULL board, I don't meet such issue. System can
> >> > > boot up successfully with commit 6f9575e55632 included.
> >> > > Anyway, the change in this patch is ok for me. it is no harm to
> >> > > the BUS clock change flow.
> >> >
> >> > Hm, that is interesting, maybe it is because we use a different SKU?
> >> > Or maybe bootloader?
> >> >
> >> > I tested here with a 800 MHz clocked variant on a Colibri iMX6ULL
> >> > using U-Boot 2016.11.
> >> >
> >>
> >> I'll throw this into fixes today because it fixes something to be
> >> useful. It's still interesting to see what's different between the two setups
> though.
> >
> > Thanks.
> >
> > I will find some 800MHz parts and have a try with different bootloader later.
> > Will let you know, when I have some results.
> >
>
> FWIW, I tried two SKUs here:
> MCIMX6Z2DVM05AA (528Mhz)
> MCIMX6Z2CVM08AA (800MHz)
>

MCIMX6Z or MCIMX6Y ? I think i.MX6ULL should be 6Y.

Jacky

> Both run at 396MHz in U-Boot, and both freeze and the same location.
>
> --
> Stefan