Re: [PATCH] clk: imx6ull: use OSC clock during AXI rate change

From: Stefan Agner
Date: Wed May 09 2018 - 10:13:09 EST


On 09.05.2018 03:26, Jacky Bai wrote:
>> Subject: Re: [PATCH] clk: imx6ull: use OSC clock during AXI rate change
>>
>> Quoting Stefan Agner (2018-05-08 06:20:03)
>> > On 08.05.2018 09:32, Jacky Bai wrote:
>> > >
>> > > I have tried two 6ULL board, I don't meet such issue. System can
>> > > boot up successfully with commit 6f9575e55632 included.
>> > > Anyway, the change in this patch is ok for me. it is no harm to the
>> > > BUS clock change flow.
>> >
>> > Hm, that is interesting, maybe it is because we use a different SKU?
>> > Or maybe bootloader?
>> >
>> > I tested here with a 800 MHz clocked variant on a Colibri iMX6ULL
>> > using U-Boot 2016.11.
>> >
>>
>> I'll throw this into fixes today because it fixes something to be useful. It's still
>> interesting to see what's different between the two setups though.
>
> Thanks.
>
> I will find some 800MHz parts and have a try with different bootloader later.
> Will let you know, when I have some results.
>

FWIW, I tried two SKUs here:
MCIMX6Z2DVM05AA (528Mhz)
MCIMX6Z2CVM08AA (800MHz)

Both run at 396MHz in U-Boot, and both freeze and the same location.

--
Stefan