RE: [RFC PATCH 2/2] drivers: clk: Add ZynqMP clock driver

From: Jolly Shah
Date: Wed Jan 10 2018 - 15:15:19 EST


Hi Philippe,
Thanks for the review.
Will fix all SPDX tags in next version.

Thanks,
Jolly Shah

> -----Original Message-----
> From: Philippe Ombredanne [mailto:pombredanne@xxxxxxxx]
> Sent: Tuesday, January 09, 2018 4:53 AM
> To: Jolly Shah <JOLLYS@xxxxxxxxxx>
> Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>; Stephen Boyd
> <sboyd@xxxxxxxxxxxxxx>; Michal Simek <michal.simek@xxxxxxxxxx>; linux-
> clk@xxxxxxxxxxxxxxx; moderated list:ARM/FREESCALE IMX / MXC ARM
> ARCHITECTURE <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; LKML <linux-
> kernel@xxxxxxxxxxxxxxx>; Jolly Shah <JOLLYS@xxxxxxxxxx>; Rajan Vaja
> <RAJANV@xxxxxxxxxx>; Tejas Patel <TEJASP@xxxxxxxxxx>; Shubhrajyoti Datta
> <shubhraj@xxxxxxxxxx>
> Subject: Re: [RFC PATCH 2/2] drivers: clk: Add ZynqMP clock driver
>
> Jolly,
>
> On Mon, Jan 8, 2018 at 11:16 PM, Jolly Shah <jolly.shah@xxxxxxxxxx> wrote:
> > This patch adds CCF compliant clock driver for ZynqMP.
> > Clock driver queries supported clock information from
> > firmware and regiters pll and output clocks with CCF.
> >
> > Signed-off-by: Jolly Shah <jollys@xxxxxxxxxx>
> > Signed-off-by: Rajan Vaja <rajanv@xxxxxxxxxx>
> > Signed-off-by: Tejas Patel <tejasp@xxxxxxxxxx>
> > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
> > ---
>
> <snip>
>
>
> > .../devicetree/bindings/clock/zynq_mpsoc.txt | 163 +++++
> > drivers/clk/Kconfig | 1 +
> > drivers/clk/Makefile | 1 +
> > drivers/clk/zynqmp/Kconfig | 8 +
> > drivers/clk/zynqmp/Makefile | 3 +
> > drivers/clk/zynqmp/clk-gate-zynqmp.c | 158 +++++
> > drivers/clk/zynqmp/clk-mux-zynqmp.c | 190 ++++++
> > drivers/clk/zynqmp/clkc.c | 707 +++++++++++++++++++++
> > drivers/clk/zynqmp/divider.c | 239 +++++++
> > drivers/clk/zynqmp/pll.c | 384 +++++++++++
> > include/linux/clk/zynqmp.h | 46 ++
> > 11 files changed, 1900 insertions(+)
> > create mode 100644
> Documentation/devicetree/bindings/clock/zynq_mpsoc.txt
> > create mode 100644 drivers/clk/zynqmp/Kconfig
> > create mode 100644 drivers/clk/zynqmp/Makefile
> > create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c
> > create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c
> > create mode 100644 drivers/clk/zynqmp/clkc.c
> > create mode 100644 drivers/clk/zynqmp/divider.c
> > create mode 100644 drivers/clk/zynqmp/pll.c
> > create mode 100644 include/linux/clk/zynqmp.h
> >