RE: [RFC PATCH 2/2] drivers: clk: Add ZynqMP clock driver

From: Jolly Shah
Date: Wed Jan 10 2018 - 15:06:51 EST


Thanks Philippe for review.
Will fix all SPDX tags in next version.

> -----Original Message-----
> From: Philippe Ombredanne [mailto:pombredanne@xxxxxxxx]
> Sent: Tuesday, January 09, 2018 4:53 AM
> To: Jolly Shah <JOLLYS@xxxxxxxxxx>
> Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>; Stephen Boyd
> <sboyd@xxxxxxxxxxxxxx>; Michal Simek <michal.simek@xxxxxxxxxx>; linux-
> clk@xxxxxxxxxxxxxxx; moderated list:ARM/FREESCALE IMX / MXC ARM
> ARCHITECTURE <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; LKML <linux-
> kernel@xxxxxxxxxxxxxxx>; Jolly Shah <JOLLYS@xxxxxxxxxx>; Rajan Vaja
> <RAJANV@xxxxxxxxxx>; Tejas Patel <TEJASP@xxxxxxxxxx>; Shubhrajyoti Datta
> <shubhraj@xxxxxxxxxx>
> Subject: Re: [RFC PATCH 2/2] drivers: clk: Add ZynqMP clock driver
>
> Jolly,
>
> On Mon, Jan 8, 2018 at 11:16 PM, Jolly Shah <jolly.shah@xxxxxxxxxx> wrote:
> > This patch adds CCF compliant clock driver for ZynqMP.
> > Clock driver queries supported clock information from
> > firmware and regiters pll and output clocks with CCF.
> >
> > Signed-off-by: Jolly Shah <jollys@xxxxxxxxxx>
> > Signed-off-by: Rajan Vaja <rajanv@xxxxxxxxxx>
> > Signed-off-by: Tejas Patel <tejasp@xxxxxxxxxx>
> > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
> > ---
>
> <snip>
>
>
> > .../devicetree/bindings/clock/zynq_mpsoc.txt | 163 +++++
> > drivers/clk/Kconfig | 1 +
> > drivers/clk/Makefile | 1 +
> > drivers/clk/zynqmp/Kconfig | 8 +
> > drivers/clk/zynqmp/Makefile | 3 +
> > drivers/clk/zynqmp/clk-gate-zynqmp.c | 158 +++++
> > drivers/clk/zynqmp/clk-mux-zynqmp.c | 190 ++++++
> > drivers/clk/zynqmp/clkc.c | 707 +++++++++++++++++++++
> > drivers/clk/zynqmp/divider.c | 239 +++++++
> > drivers/clk/zynqmp/pll.c | 384 +++++++++++
> > include/linux/clk/zynqmp.h | 46 ++
> > 11 files changed, 1900 insertions(+)
> > create mode 100644
> Documentation/devicetree/bindings/clock/zynq_mpsoc.txt
> > create mode 100644 drivers/clk/zynqmp/Kconfig
> > create mode 100644 drivers/clk/zynqmp/Makefile
> > create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c
> > create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c
> > create mode 100644 drivers/clk/zynqmp/clkc.c
> > create mode 100644 drivers/clk/zynqmp/divider.c
> > create mode 100644 drivers/clk/zynqmp/pll.c
> > create mode 100644 include/linux/clk/zynqmp.h
> >
> > diff --git a/Documentation/devicetree/bindings/clock/zynq_mpsoc.txt
> b/Documentation/devicetree/bindings/clock/zynq_mpsoc.txt
> > new file mode 100644
> > index 0000000..9061b57
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/zynq_mpsoc.txt
> > @@ -0,0 +1,163 @@
> > +Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC
> > +
> > +The Zynq Ultrascale+ MPSoC has several different clk providers,
> > +each with there own bindings.
> > +The purpose of this document is to document their usage.
> > +
> > +See clock_bindings.txt for more information on the generic clock bindings.
> > +
> > +== Clock Controller ==
> > +The clock controller is a logical abstraction of Zynq Ultrascale+ MPSoC clock
> > +tree. It reads required input clock frequencies from the devicetree and acts
> > +as clock provider for all clock consumers of PS clocks.
> > +
> > +Required properties:
> > + - #clock-cells : Must be 1
> > + - compatible : "xlnx,zynqmp-clkc"
> > + - clocks : list of clock specifiers which are external input clocks to the
> > + given clock controller. Please refer the next section to find
> > + the input clocks for a given controller.
> > + - clock-names : list of names of clocks which are exteral input clocks to the
> > + given clock controller. Please refer to the clock bindings
> > + for more details
> > +
> > +Input clocks for zynqmp Ultrascale+ clock controller:
> > +The Zynq UltraScale+ MPSoC has one primary and four alternative reference
> clock
> > +inputs.
> > +These required clock inputs are the
> > + - pss_ref_clk (PS reference clock)
> > + - video_clk (reference clock for video system )
> > + - pss_alt_ref_clk (alternative PS reference clock)
> > + - aux_ref_clk
> > + - gt_crx_ref_clk (transceiver reference clock)
> > +
> > +The following strings are optional parameters to the 'clock-names' property
> in
> > +order to provide an optional (E)MIO clock source.
> > + - swdt0_ext_clk
> > + - swdt1_ext_clk
> > + - gem0_emio_clk
> > + - gem1_emio_clk
> > + - gem2_emio_clk
> > + - gem3_emio_clk
> > + - mio_clk_XX # with XX = 00..77
> > + - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
> > +
> > +
> > +Output clocks for zynqmp Ultrascale+ clock controller:
> > +Output clocks are registered based on clock information received from
> firmware.
> > +Output clock indexes are mentioned below:
> > +
> > +Clock ID: Output clock name:
> > +-------------------------------------
> > +0 iopll
> > +1 rpll
> > +2 apll
> > +3 dpll
> > +4 vpll
> > +5 iopll_to_fpd
> > +6 rpll_to_fpd
> > +7 apll_to_lpd
> > +8 dpll_to_lpd
> > +9 vpll_to_lpd
> > +10 acpu
> > +11 acpu_half
> > +12 dbf_fpd
> > +13 dbf_lpd
> > +14 dbg_trace
> > +15 dbg_tstmp
> > +16 dp_video_ref
> > +17 dp_audio_ref
> > +18 dp_stc_ref
> > +19 gdma_ref
> > +20 dpdma_ref
> > +21 ddr_ref
> > +22 sata_ref
> > +23 pcie_ref
> > +24 gpu_ref
> > +25 gpu_pp0_ref
> > +26 gpu_pp1_ref
> > +27 topsw_main
> > +28 topsw_lsbus
> > +29 gtgref0_ref
> > +30 lpd_switch
> > +31 lpd_lsbus
> > +32 usb0_bus_ref
> > +33 usb1_bus_ref
> > +34 usb3_dual_ref
> > +35 usb0
> > +36 usb1
> > +37 cpu_r5
> > +38 cpu_r5_core
> > +39 csu_spb
> > +40 csu_pll
> > +41 pcap
> > +42 iou_switch
> > +43 gem_tsu_ref
> > +44 gem_tsu
> > +45 gem0_ref
> > +46 gem1_ref
> > +47 gem2_ref
> > +48 gem3_ref
> > +49 gem0_tx
> > +50 gem1_tx
> > +51 gem2_tx
> > +52 gem3_tx
> > +53 qspi_ref
> > +54 sdio0_ref
> > +55 sdio1_ref
> > +56 uart0_ref
> > +57 uart1_ref
> > +58 spi0_ref
> > +59 spi1_ref
> > +60 nand_ref
> > +61 i2c0_ref
> > +62 i2c1_ref
> > +63 can0_ref
> > +64 can1_ref
> > +65 can0
> > +66 can1
> > +67 dll_ref
> > +68 adma_ref
> > +69 timestamp_ref
> > +70 ams_ref
> > +71 pl0_ref
> > +72 pl1_ref
> > +73 pl2_ref
> > +74 pl3_ref
> > +75 wdt
> > +76 iopll_int
> > +77 iopll_pre_src
> > +78 iopll_half
> > +79 iopll_int_mux
> > +80 iopll_post_src
> > +81 rpll_int
> > +82 rpll_pre_src
> > +83 rpll_half
> > +84 rpll_int_mux
> > +85 rpll_post_src
> > +86 apll_int
> > +87 apll_pre_src
> > +88 apll_half
> > +89 apll_int_mux
> > +90 apll_post_src
> > +91 dpll_int
> > +92 dpll_pre_src
> > +93 dpll_half
> > +94 dpll_int_mux
> > +95 dpll_post_src
> > +96 vpll_int
> > +97 vpll_pre_src
> > +98 vpll_half
> > +99 vpll_int_mux
> > +100 vpll_post_src
> > +101 can0_mio
> > +102 can1_mio
> > +
> > +Example:
> > +
> > +clkc: clkc@ff5e0020 {
> > + #clock-cells = <1>;
> > + compatible = "xlnx,zynqmp-clkc";
> > + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
> <&aux_ref_clk>, <&gt_crx_ref_clk>;
> > + clock-names = "pss_ref_clk", "video_clk",
> "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk"
> > +};
> > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> > index 1c4e1aa..526f4f5 100644
> > --- a/drivers/clk/Kconfig
> > +++ b/drivers/clk/Kconfig
> > @@ -239,6 +239,7 @@ source "drivers/clk/samsung/Kconfig"
> > source "drivers/clk/sunxi-ng/Kconfig"
> > source "drivers/clk/tegra/Kconfig"
> > source "drivers/clk/ti/Kconfig"
> > +source "drivers/clk/zynqmp/Kconfig"
> > source "drivers/clk/uniphier/Kconfig"
> >
> > endmenu
> > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> > index f7f761b..d7328b4 100644
> > --- a/drivers/clk/Makefile
> > +++ b/drivers/clk/Makefile
> > @@ -98,3 +98,4 @@ obj-$(CONFIG_X86) += x86/
> > endif
> > obj-$(CONFIG_ARCH_ZX) += zte/
> > obj-$(CONFIG_ARCH_ZYNQ) += zynq/
> > +obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/
> > diff --git a/drivers/clk/zynqmp/Kconfig b/drivers/clk/zynqmp/Kconfig
> > new file mode 100644
> > index 0000000..a6d54e9
> > --- /dev/null
> > +++ b/drivers/clk/zynqmp/Kconfig
> > @@ -0,0 +1,8 @@
> > +config COMMON_CLK_ZYNQMP
> > + bool "Support for Xilinx ZynqMP Ultrascale+ clock controllers"
> > + depends on OF
> > + depends on ARCH_ZYNQMP || COMPILE_TEST
> > + help
> > + Support for the Zynqmp Ultrascale clock controller.
> > + It has a dependency on the PMU firmware.
> > + Say Y if you want to support clock support
> > diff --git a/drivers/clk/zynqmp/Makefile b/drivers/clk/zynqmp/Makefile
> > new file mode 100644
> > index 0000000..7d50f7a
> > --- /dev/null
> > +++ b/drivers/clk/zynqmp/Makefile
> > @@ -0,0 +1,3 @@
> > +# Zynq Ultrascale+ MPSoC clock specific Makefile
> > +
> > +obj-$(CONFIG_ARCH_ZYNQMP) += pll.o clk-gate-zynqmp.o divider.o clk-
> mux-zynqmp.o clkc.o
> > diff --git a/drivers/clk/zynqmp/clk-gate-zynqmp.c b/drivers/clk/zynqmp/clk-
> gate-zynqmp.c
> > new file mode 100644
> > index 0000000..45eeed8
> > --- /dev/null
> > +++ b/drivers/clk/zynqmp/clk-gate-zynqmp.c
> > @@ -0,0 +1,158 @@
> > +/*
> > + * Zynq UltraScale+ MPSoC clock controller
> > + *
> > + * Copyright (C) 2016-2017 Xilinx
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
>
> This tag should be on the fist line this way:
> // SPDX-License-Identifier: GPL-2.0+
>
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/clk/zynqmp.h>
> > +#include <linux/module.h>
> > +#include <linux/slab.h>
> > +#include <linux/io.h>
> > +#include <linux/err.h>
> > +#include <linux/string.h>
> > +
> > +/**
> > + * struct clk_gate - gating clock
> > + *
> > + * @hw: handle between common and hardware-specific interfaces
> > + * @flags: hardware-specific flags
> > + * @clk_id: Id of clock
> > + */
> > +struct zynqmp_clk_gate {
> > + struct clk_hw hw;
> > + u8 flags;
> > + u32 clk_id;
> > +};
> > +
> > +#define to_zynqmp_clk_gate(_hw) container_of(_hw, struct
> zynqmp_clk_gate, hw)
> > +
> > +/**
> > + * zynqmp_clk_gate_enable - Enable clock
> > + * @hw: handle between common and hardware-specific interfaces
> > + *
> > + * Return: 0 always
> > + */
> > +static int zynqmp_clk_gate_enable(struct clk_hw *hw)
> > +{
> > + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = gate->clk_id;
> > + int ret = 0;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_enable)
> > + return -ENXIO;
> > +
> > + ret = eemi_ops->clock_enable(clk_id);
> > +
> > + if (ret)
> > + pr_warn_once("%s() clock enabled failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * zynqmp_clk_gate_disable - Disable clock
> > + * @hw: handle between common and hardware-specific interfaces
> > + */
> > +static void zynqmp_clk_gate_disable(struct clk_hw *hw)
> > +{
> > + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = gate->clk_id;
> > + int ret = 0;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_disable)
> > + return;
> > +
> > + ret = eemi_ops->clock_disable(clk_id);
> > +
> > + if (ret)
> > + pr_warn_once("%s() clock disable failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +}
> > +
> > +/**
> > + * zynqmp_clk_gate_is_enable - Check clock state
> > + * @hw: handle between common and hardware-specific interfaces
> > + *
> > + * Return: 1 if enabled
> > + * 0 if disabled
> > + */
> > +static int zynqmp_clk_gate_is_enabled(struct clk_hw *hw)
> > +{
> > + struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = gate->clk_id;
> > + int state, ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_getstate)
> > + return 0;
> > +
> > + ret = eemi_ops->clock_getstate(clk_id, &state);
> > + if (ret)
> > + pr_warn_once("%s() clock get state failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + return state ? 1 : 0;
> > +}
> > +
> > +const struct clk_ops zynqmp_clk_gate_ops = {
> > + .enable = zynqmp_clk_gate_enable,
> > + .disable = zynqmp_clk_gate_disable,
> > + .is_enabled = zynqmp_clk_gate_is_enabled,
> > +};
> > +EXPORT_SYMBOL_GPL(zynqmp_clk_gate_ops);
> > +
> > +/**
> > + * zynqmp_clk_register_gate - register a gate clock with the clock framework
> > + * @dev: device that is registering this clock
> > + * @name: name of this clock
> > + * @clk_id: Id of this clock
> > + * @parents: name of this clock's parents
> > + * @num_parents: number of parents
> > + * @flags: framework-specific flags for this clock
> > + * @clk_gate_flags: gate-specific flags for this clock
> > + *
> > + * Return: clock handle of the registered clock gate
> > + */
> > +struct clk *zynqmp_clk_register_gate(struct device *dev, const char *name,
> > + u32 clk_id, const char * const *parents,
> > + u8 num_parents, unsigned long flags,
> > + u8 clk_gate_flags)
> > +{
> > + struct zynqmp_clk_gate *gate;
> > + struct clk *clk;
> > + struct clk_init_data init;
> > +
> > + /* allocate the gate */
> > + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> > + if (!gate)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + init.name = name;
> > + init.ops = &zynqmp_clk_gate_ops;
> > + init.flags = flags;
> > + init.parent_names = parents;
> > + init.num_parents = num_parents;
> > +
> > + /* struct clk_gate assignments */
> > + gate->flags = clk_gate_flags;
> > + gate->hw.init = &init;
> > + gate->clk_id = clk_id;
> > +
> > + clk = clk_register(dev, &gate->hw);
> > +
> > + if (IS_ERR(clk))
> > + kfree(gate);
> > +
> > + return clk;
> > +}
> > diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-
> mux-zynqmp.c
> > new file mode 100644
> > index 0000000..ee36244
> > --- /dev/null
> > +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
> > @@ -0,0 +1,190 @@
> > +/*
> > + * Zynq UltraScale+ MPSoC mux
> > + *
> > + * Copyright (C) 2016-2017 Xilinx
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
>
> This tag should be on the fist line this way:
> // SPDX-License-Identifier: GPL-2.0+
>
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/clk/zynqmp.h>
> > +#include <linux/module.h>
> > +#include <linux/slab.h>
> > +#include <linux/io.h>
> > +#include <linux/err.h>
> > +
> > +/*
> > + * DOC: basic adjustable multiplexer clock that cannot gate
> > + *
> > + * Traits of this clock:
> > + * prepare - clk_prepare only ensures that parents are prepared
> > + * enable - clk_enable only ensures that parents are enabled
> > + * rate - rate is only affected by parent switching. No clk_set_rate support
> > + * parent - parent is adjustable through clk_set_parent
> > + */
> > +
> > +/**
> > + * struct zynqmp_clk_mux - multiplexer clock
> > + *
> > + * @hw: handle between common and hardware-specific interfaces
> > + * @flags: hardware-specific flags
> > + * @clk_id: Id of clock
> > + */
> > +struct zynqmp_clk_mux {
> > + struct clk_hw hw;
> > + u8 flags;
> > + u32 clk_id;
> > +};
> > +
> > +#define to_zynqmp_clk_mux(_hw) container_of(_hw, struct
> zynqmp_clk_mux, hw)
> > +
> > +/**
> > + * zynqmp_clk_mux_get_parent - Get parent of clock
> > + * @hw: handle between common and hardware-specific interfaces
> > + *
> > + * Return: Parent index
> > + */
> > +static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
> > +{
> > + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = mux->clk_id;
> > + u32 val;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_getparent)
> > + return -ENXIO;
> > +
> > + ret = eemi_ops->clock_getparent(clk_id, &val);
> > +
> > + if (ret)
> > + pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + if (val && (mux->flags & CLK_MUX_INDEX_BIT))
> > + val = ffs(val) - 1;
> > +
> > + if (val && (mux->flags & CLK_MUX_INDEX_ONE))
> > + val--;
> > +
> > + return val;
> > +}
> > +
> > +/**
> > + * zynqmp_clk_mux_set_parent - Set parent of clock
> > + * @hw: handle between common and hardware-specific interfaces
> > + * @index: Parent index
> > + *
> > + * Return: 0 always
> > + */
> > +static int zynqmp_clk_mux_set_parent(struct clk_hw *hw, u8 index)
> > +{
> > + struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = mux->clk_id;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_setparent)
> > + return -ENXIO;
> > +
> > + if (mux->flags & CLK_MUX_INDEX_BIT)
> > + index = 1 << index;
> > +
> > + if (mux->flags & CLK_MUX_INDEX_ONE)
> > + index++;
> > +
> > + ret = eemi_ops->clock_setparent(clk_id, index);
> > +
> > + if (ret)
> > + pr_warn_once("%s() set parent failed for clock: %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + return 0;
> > +}
> > +
> > +const struct clk_ops zynqmp_clk_mux_ops = {
> > + .get_parent = zynqmp_clk_mux_get_parent,
> > + .set_parent = zynqmp_clk_mux_set_parent,
> > + .determine_rate = __clk_mux_determine_rate,
> > +};
> > +EXPORT_SYMBOL_GPL(zynqmp_clk_mux_ops);
> > +
> > +const struct clk_ops zynqmp_clk_mux_ro_ops = {
> > + .get_parent = zynqmp_clk_mux_get_parent,
> > +};
> > +EXPORT_SYMBOL_GPL(zynqmp_clk_mux_ro_ops);
> > +
> > +/**
> > + * zynqmp_clk_register_mux_table - register a mux table with the clock
> framework
> > + * @dev: device that is registering this clock
> > + * @name: name of this clock
> > + * @clk_id: Id of this clock
> > + * @parent_names: name of this clock's parents
> > + * @num_parents: number of parents
> > + * @flags: framework-specific flags for this clock
> > + * @clk_mux_flags: mux-specific flags for this clock
> > + *
> > + * Return: clock handle of the registered clock mux
> > + */
> > +struct clk *zynqmp_clk_register_mux_table(struct device *dev, const char
> *name,
> > + u32 clk_id,
> > + const char * const *parent_names,
> > + u8 num_parents,
> > + unsigned long flags,
> > + u8 clk_mux_flags)
> > +{
> > + struct zynqmp_clk_mux *mux;
> > + struct clk *clk;
> > + struct clk_init_data init;
> > +
> > + /* allocate the mux */
> > + mux = kzalloc(sizeof(*mux), GFP_KERNEL);
> > + if (!mux)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + init.name = name;
> > + if (clk_mux_flags & CLK_MUX_READ_ONLY)
> > + init.ops = &zynqmp_clk_mux_ro_ops;
> > + else
> > + init.ops = &zynqmp_clk_mux_ops;
> > + init.flags = flags;
> > + init.parent_names = parent_names;
> > + init.num_parents = num_parents;
> > +
> > + /* struct clk_mux assignments */
> > + mux->flags = clk_mux_flags;
> > + mux->hw.init = &init;
> > + mux->clk_id = clk_id;
> > +
> > + clk = clk_register(dev, &mux->hw);
> > +
> > + if (IS_ERR(clk))
> > + kfree(mux);
> > +
> > + return clk;
> > +}
> > +EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux_table);
> > +
> > +/**
> > + * zynqmp_clk_register_mux - register a mux clock with the clock framework
> > + * @dev: device that is registering this clock
> > + * @name: name of this clock
> > + * @clk_id: Id of this clock
> > + * @parent_names: name of this clock's parents
> > + * @num_parents: number of parents
> > + * @flags: framework-specific flags for this clock
> > + * @clk_mux_flags: mux-specific flags for this clock
> > + *
> > + * Return: clock handle of the registered clock mux
> > + */
> > +struct clk *zynqmp_clk_register_mux(struct device *dev, const char *name,
> > + u32 clk_id, const char **parent_names,
> > + u8 num_parents, unsigned long flags,
> > + u8 clk_mux_flags)
> > +{
> > + return zynqmp_clk_register_mux_table(dev, name, clk_id, parent_names,
> > + num_parents, flags, clk_mux_flags);
> > +}
> > +EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux);
> > diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c
> > new file mode 100644
> > index 0000000..36bf1c1
> > --- /dev/null
> > +++ b/drivers/clk/zynqmp/clkc.c
> > @@ -0,0 +1,707 @@
> > +/*
> > + * Zynq UltraScale+ MPSoC clock controller
> > + *
> > + * Copyright (C) 2016-2017 Xilinx
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
>
> This tag should be on the fist line this way:
> // SPDX-License-Identifier: GPL-2.0+
>
> > + *
> > + * Based on drivers/clk/zynq/clkc.c
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/clk/zynqmp.h>
> > +#include <linux/io.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/slab.h>
> > +#include <linux/string.h>
> > +
> > +#define MAX_PARENT 100
> > +#define MAX_NODES 6
> > +#define MAX_NAME_LEN 50
> > +#define MAX_CLOCK 300
> > +
> > +#define CLK_INIT_ENABLE_SHIFT 1
> > +#define CLK_TYPE_SHIFT 2
> > +
> > +#define PM_API_PAYLOAD_LEN 3
> > +
> > +#define NA_PARENT -1
> > +#define DUMMY_PARENT -2
> > +
> > +#define CLK_TYPE_FIELD_LEN 4
> > +#define CLK_TOPOLOGY_NODE_OFFSET 16
> > +#define NODES_PER_RESP 3
> > +
> > +#define CLK_TYPE_FIELD_MASK 0xF
> > +#define CLK_FLAG_FIELD_SHIFT 8
> > +#define CLK_FLAG_FIELD_MASK 0x3FFF
> > +#define CLK_TYPE_FLAG_FIELD_SHIFT 24
> > +#define CLK_TYPE_FLAG_FIELD_MASK 0xFF
> > +
> > +#define CLK_PARENTS_ID_LEN 16
> > +#define CLK_PARENTS_ID_MASK 0xFFFF
> > +
> > +/* Flags for parents */
> > +#define PARENT_CLK_SELF 0
> > +#define PARENT_CLK_NODE1 1
> > +#define PARENT_CLK_NODE2 2
> > +#define PARENT_CLK_NODE3 3
> > +#define PARENT_CLK_NODE4 4
> > +#define PARENT_CLK_EXTERNAL 5
> > +
> > +#define END_OF_CLK_NAME "END_OF_CLK"
> > +#define RESERVED_CLK_NAME ""
> > +
> > +#define CLK_VALID_MASK 0x1
> > +#define CLK_INIT_ENABLE_MASK (0x1 << CLK_INIT_ENABLE_SHIFT)
> > +
> > +enum clk_type {
> > + CLK_TYPE_OUTPUT,
> > + CLK_TYPE_EXTERNAL,
> > +};
> > +
> > +/**
> > + * struct clock_parent - Structure for parent of clock
> > + * @id: Parent clock ID
> > + * @flag: Parent flags
> > + */
> > +struct clock_parent {
> > + char name[MAX_NAME_LEN];
> > + int id;
> > + u32 flag;
> > +};
> > +
> > +/**
> > + * struct clock_topology - Structure for topology of clock
> > + * @type: Type of topology
> > + * @flag: Topology flags
> > + * @type_flag: Topology type specific flag
> > + */
> > +struct clock_topology {
> > + u32 type;
> > + u32 flag;
> > + u32 type_flag;
> > +};
> > +
> > +/**
> > + * struct zynqmp_clock - Structure for clock
> > + * @clk_name: Clock name
> > + * @valid: Validity flag of clock
> > + * @init_enable: init_enable flag of clock
> > + * @topology: structure of topology of clock
> > + * @num_node: Number of nodes present in topology
> > + * @parent: structure of parent of clock
> > + * @num_parents: Number of parents of clock
> > + * @type: Type of clock
> > + */
> > +struct zynqmp_clock {
> > + char clk_name[MAX_NAME_LEN];
> > + u32 valid;
> > + u32 init_enable;
> > + enum clk_type type;
> > + struct clock_topology node[MAX_NODES];
> > + u32 num_nodes;
> > + struct clock_parent parent[MAX_PARENT];
> > + u32 num_parents;
> > +};
> > +
> > +static const char clk_type_postfix[][10] = {
> > + [TYPE_INVALID] = "",
> > + [TYPE_MUX] = "_mux",
> > + [TYPE_GATE] = "",
> > + [TYPE_DIV1] = "_div1",
> > + [TYPE_DIV2] = "_div2",
> > + [TYPE_FIXEDFACTOR] = "_ff",
> > + [TYPE_PLL] = ""
> > +};
> > +
> > +static struct zynqmp_clock clock[MAX_CLOCK];
> > +static struct clk_onecell_data zynqmp_clk_data;
> > +static struct clk *zynqmp_clks[MAX_CLOCK];
> > +static unsigned int clock_max_idx;
> > +static const struct zynqmp_eemi_ops *eemi_ops;
> > +
> > +/**
> > + * is_valid_clock - Check whether clock is valid or not
> > + * @clk_id: Clock Index
> > + * @valid: 1: if clock is valid
> > + * 0: invalid clock
> > + *
> > + * Return: 0 Success
> > + * Error code: Failure
> > + */
> > +static int is_valid_clock(u32 clk_id, u32 *valid)
> > +{
> > + if (clk_id < 0 || clk_id > clock_max_idx)
> > + return -ENODEV;
> > +
> > + *valid = clock[clk_id].valid;
> > +
> > + return *valid ? 0 : -EINVAL;
> > +}
> > +
> > +/**
> > + * zynqmp_get_clock_name - Get name of clock from clock index
> > + * @clk_id: Clock index
> > + * @clk_name: Name of clock
> > + *
> > + * Return: 0: Success
> > + * Error code: failure
> > + */
> > +static int zynqmp_get_clock_name(u32 clk_id, char *clk_name)
> > +{
> > + int ret;
> > + u32 valid;
> > +
> > + ret = is_valid_clock(clk_id, &valid);
> > + if (!ret && valid) {
> > + strncpy(clk_name, clock[clk_id].clk_name, MAX_NAME_LEN);
> > + return 0;
> > + } else {
> > + return ret;
> > + }
> > +}
> > +
> > +/**
> > + * get_clock_type - Get type of clock
> > + * @clk_id: Clock Index
> > + * @type: Clock type: CLK_TYPE_OUTPUT or CLK_TYPE_EXTERNAL
> > + *
> > + * Return: 0: Success
> > + * Error code: failure
> > + */
> > +static int get_clock_type(u32 clk_id, u32 *type)
> > +{
> > + int ret;
> > + u32 valid;
> > +
> > + ret = is_valid_clock(clk_id, &valid);
> > + if (!ret && valid) {
> > + *type = clock[clk_id].type;
> > + return 0;
> > + } else {
> > + return ret;
> > + }
> > +}
> > +
> > +/**
> > + * zynqmp_pm_clock_get_name - Get the name of clock for given id
> > + * @clock_id: ID of the clock to be queried
> > + * @name: Name of given clock
> > + *
> > + * This function is used to get name of clock specified by given
> > + * clock ID.
> > + *
> > + * Return: Returns status, in case of error name would be 0.
> > + */
> > +static int zynqmp_pm_clock_get_name(u32 clock_id, char *name)
> > +{
> > + struct zynqmp_pm_query_data qdata = {0};
> > + u32 ret_payload[PAYLOAD_ARG_CNT];
> > +
> > + qdata.qid = PM_QID_CLOCK_GET_NAME;
> > + qdata.arg1 = clock_id;
> > +
> > + eemi_ops->query_data(qdata, ret_payload);
> > + memcpy(name, ret_payload, CLK_GET_NAME_RESP_LEN);
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * zynqmp_pm_clock_get_topology - Get the topology of clock for given id
> > + * @clock_id: ID of the clock to be queried
> > + * @index: Node index of clock topology
> > + * @topology: Buffer to store nodes in topology and flags
> > + *
> > + * This function is used to get topology information for the clock
> > + * specified by given clock ID.
> > + *
> > + * This API will return 3 node of topology with a single response. To get
> > + * other nodes, master should call same API in loop with new
> > + * index till error is returned. E.g First call should have
> > + * index 0 which will return nodes 0,1 and 2. Next call, index
> > + * should be 3 which will return nodes 3,4 and 5 and so on.
> > + *
> > + * Return: Returns status, either success or error+reason.
> > + */
> > +static int zynqmp_pm_clock_get_topology(u32 clock_id, u32 index, u32
> *topology)
> > +{
> > + struct zynqmp_pm_query_data qdata = {0};
> > + u32 ret_payload[PAYLOAD_ARG_CNT];
> > +
> > + qdata.qid = PM_QID_CLOCK_GET_TOPOLOGY;
> > + qdata.arg1 = clock_id;
> > + qdata.arg2 = index;
> > +
> > + eemi_ops->query_data(qdata, ret_payload);
> > + memcpy(topology, &ret_payload[1],
> CLK_GET_TOPOLOGY_RESP_WORDS * 4);
> > +
> > + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]);
> > +}
> > +
> > +/**
> > + * zynqmp_pm_clock_get_fixedfactor_params - Get the clock's fixed factor
> > + * parameters for fixed clock
> > + * @clock_id: Clock ID
> > + * @mul: Multiplication value
> > + * @div: Divisor value
> > + *
> > + * This function is used to get fixed factor parameers for the fixed
> > + * clock. This API is application only for the fixed clock.
> > + *
> > + * Return: Returns status, either success or error+reason.
> > + */
> > +static int zynqmp_pm_clock_get_fixedfactor_params(u32 clock_id,
> > + u32 *mul,
> > + u32 *div)
> > +{
> > + struct zynqmp_pm_query_data qdata = {0};
> > + u32 ret_payload[PAYLOAD_ARG_CNT];
> > +
> > + qdata.qid = PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS;
> > + qdata.arg1 = clock_id;
> > +
> > + eemi_ops->query_data(qdata, ret_payload);
> > + *mul = ret_payload[1];
> > + *div = ret_payload[2];
> > +
> > + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]);
> > +}
> > +
> > +/**
> > + * zynqmp_pm_clock_get_parents - Get the first 3 parents of clock for given
> id
> > + * @clock_id: Clock ID
> > + * @index: Parent index
> > + * @parents: 3 parents of the given clock
> > + *
> > + * This function is used to get 3 parents for the clock specified by
> > + * given clock ID.
> > + *
> > + * This API will return 3 parents with a single response. To get
> > + * other parents, master should call same API in loop with new
> > + * parent index till error is returned. E.g First call should have
> > + * index 0 which will return parents 0,1 and 2. Next call, index
> > + * should be 3 which will return parent 3,4 and 5 and so on.
> > + *
> > + * Return: Returns status, either success or error+reason.
> > + */
> > +static int zynqmp_pm_clock_get_parents(u32 clock_id, u32 index, u32
> *parents)
> > +{
> > + struct zynqmp_pm_query_data qdata = {0};
> > + u32 ret_payload[PAYLOAD_ARG_CNT];
> > +
> > + qdata.qid = PM_QID_CLOCK_GET_PARENTS;
> > + qdata.arg1 = clock_id;
> > + qdata.arg2 = index;
> > +
> > + eemi_ops->query_data(qdata, ret_payload);
> > + memcpy(parents, &ret_payload[1], CLK_GET_PARENTS_RESP_WORDS *
> 4);
> > +
> > + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]);
> > +}
> > +
> > +/**
> > + * zynqmp_pm_clock_get_attributes - Get the attributes of clock for given id
> > + * @clock_id: Clock ID
> > + * @attributes: Clock attributes
> > + *
> > + * This function is used to get clock's attributes(e.g. valid, clock type, etc).
> > + *
> > + * Return: Returns status, either success or error+reason.
> > + */
> > +static int zynqmp_pm_clock_get_attributes(u32 clock_id, u32 *attr)
> > +{
> > + struct zynqmp_pm_query_data qdata = {0};
> > + u32 ret_payload[PAYLOAD_ARG_CNT];
> > +
> > + qdata.qid = PM_QID_CLOCK_GET_ATTRIBUTES;
> > + qdata.arg1 = clock_id;
> > +
> > + eemi_ops->query_data(qdata, ret_payload);
> > + memcpy(attr, &ret_payload[1], CLK_GET_ATTR_RESP_WORDS * 4);
> > +
> > + return zynqmp_pm_ret_code((enum pm_ret_status)ret_payload[0]);
> > +}
> > +
> > +/**
> > + * clock_get_topology: Get topology of clock from firmware using PM_API
> > + * @clk_id: Clock Index
> > + * @clk_topology: Structure of clock topology
> > + * @num_nodes: number of nodes
> > + *
> > + * Return: 0: Success
> > + * Error Code: Failure
> > + */
> > +static int clock_get_topology(u32 clk_id, struct clock_topology
> *clk_topology,
> > + u32 *num_nodes)
> > +{
> > + int j, k = 0, ret;
> > + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0};
> > +
> > + *num_nodes = 0;
> > + for (j = 0; j <= MAX_NODES; j += 3) {
> > + ret = zynqmp_pm_clock_get_topology(clk_id, j, pm_resp);
> > + if (ret)
> > + return ret;
> > + for (k = 0; k < PM_API_PAYLOAD_LEN; k++) {
> > + if (!(pm_resp[k] & CLK_TYPE_FIELD_MASK))
> > + goto done;
> > + clk_topology[*num_nodes].type = pm_resp[k] &
> > + CLK_TYPE_FIELD_MASK;
> > + clk_topology[*num_nodes].flag =
> > + (pm_resp[k] >> CLK_FLAG_FIELD_SHIFT) &
> > + CLK_FLAG_FIELD_MASK;
> > + clk_topology[*num_nodes].type_flag =
> > + (pm_resp[k] >> CLK_TYPE_FLAG_FIELD_SHIFT) &
> > + CLK_TYPE_FLAG_FIELD_MASK;
> > + (*num_nodes)++;
> > + }
> > + }
> > +done:
> > + return 0;
> > +}
> > +
> > +/**
> > + * clock_get_parents: Get parents info from firmware using PM_API
> > + * @clk_id: Clock Index
> > + * @parent: Structure of parent information
> > + * @num_parents: Total number of parents
> > + *
> > + * Return: 0: Success
> > + * Error code: Failure
> > + */
> > +static int clock_get_parents(u32 clk_id, struct clock_parent *parents,
> > + u32 *num_parents)
> > +{
> > + int j = 0, k, ret, total_parents = 0;
> > + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0};
> > +
> > + do {
> > + /* Get parents from firmware */
> > + ret = zynqmp_pm_clock_get_parents(clk_id, j, pm_resp);
> > + if (ret)
> > + return ret;
> > +
> > + for (k = 0; k < PM_API_PAYLOAD_LEN; k++) {
> > + if (pm_resp[k] == (u32)NA_PARENT) {
> > + *num_parents = total_parents;
> > + return 0;
> > + }
> > +
> > + parents[k + j].id = pm_resp[k] & CLK_PARENTS_ID_MASK;
> > + if (parents[k + j].id == DUMMY_PARENT) {
> > + strncpy(parents[k + j].name,
> > + "dummy_name", MAX_NAME_LEN);
> > + parents[k + j].flag = 0;
> > + } else {
> > + parents[k + j].flag = pm_resp[k] >>
> > + CLK_PARENTS_ID_LEN;
> > + if (zynqmp_get_clock_name(parents[k + j].id,
> > + parents[k + j].name))
> > + continue;
> > + }
> > + total_parents++;
> > + }
> > + j += PM_API_PAYLOAD_LEN;
> > + } while (total_parents <= MAX_PARENT);
> > + return 0;
> > +}
> > +
> > +/**
> > + * get_parent_list: Create list of parents name
> > + * @np: Device node
> > + * @clk_id: Clock Index
> > + * @parent_list List of parent's name
> > + * @num_parents: Total number of parents
> > + *
> > + # Return: 0: Success
> > + * Error code: Failure
> > + */
> > +static int get_parent_list(struct device_node *np, u32 clk_id,
> > + const char **parent_list, u32 *num_parents)
> > +{
> > + int i = 0, ret;
> > + u32 total_parents = clock[clk_id].num_parents;
> > + struct clock_topology *clk_nodes;
> > + struct clock_parent *parents;
> > +
> > + clk_nodes = clock[clk_id].node;
> > + parents = clock[clk_id].parent;
> > +
> > + for (i = 0; i < total_parents; i++) {
> > + if (!parents[i].flag) {
> > + parent_list[i] = parents[i].name;
> > + } else if (parents[i].flag == PARENT_CLK_EXTERNAL) {
> > + ret = of_property_match_string(np, "clock-names",
> > + parents[i].name);
> > + if (ret < 0)
> > + strncpy(parents[i].name,
> > + "dummy_name", MAX_NAME_LEN);
> > + parent_list[i] = parents[i].name;
> > + } else {
> > + strcat(parents[i].name,
> > + clk_type_postfix[clk_nodes[parents[i].flag - 1].
> > + type]);
> > + parent_list[i] = parents[i].name;
> > + }
> > + }
> > +
> > + *num_parents = total_parents;
> > + return 0;
> > +}
> > +
> > +/**
> > + * zynqmp_register_clk_topology: Register clock topology
> > + * @clk_id: Clock Index
> > + * @clk_name: Clock Name
> > + * @num_parents: Total number of parents
> > + * @parent_names: List of parents name
> > + *
> > + * Return: 0: Success
> > + * Error code: Failure
> > + */
> > +static struct clk *zynqmp_register_clk_topology(int clk_id, char *clk_name,
> > + int num_parents,
> > + const char **parent_names)
> > +{
> > + int j, ret;
> > + u32 num_nodes, mult, div;
> > + char *clk_out = NULL;
> > + struct clock_topology *nodes;
> > + struct clk *clk = NULL;
> > +
> > + nodes = clock[clk_id].node;
> > + num_nodes = clock[clk_id].num_nodes;
> > +
> > + for (j = 0; j < num_nodes; j++) {
> > + if (j != (num_nodes - 1)) {
> > + clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name,
> > + clk_type_postfix[nodes[j].type]);
> > + } else {
> > + clk_out = kasprintf(GFP_KERNEL, "%s", clk_name);
> > + }
> > +
> > + switch (nodes[j].type) {
> > + case TYPE_MUX:
> > + clk = zynqmp_clk_register_mux(NULL, clk_out,
> > + clk_id, parent_names,
> > + num_parents,
> > + nodes[j].flag,
> > + nodes[j].type_flag);
> > + break;
> > + case TYPE_PLL:
> > + clk = clk_register_zynqmp_pll(clk_out, clk_id,
> > + parent_names, 1,
> > + nodes[j].flag);
> > + break;
> > + case TYPE_FIXEDFACTOR:
> > + ret = zynqmp_pm_clock_get_fixedfactor_params(clk_id,
> > + &mult,
> > + &div);
> > + clk = clk_register_fixed_factor(NULL, clk_out,
> > + parent_names[0],
> > + nodes[j].flag, mult,
> > + div);
> > + break;
> > + case TYPE_DIV1:
> > + case TYPE_DIV2:
> > + clk = zynqmp_clk_register_divider(NULL, clk_out, clk_id,
> > + nodes[j].type,
> > + parent_names, 1,
> > + nodes[j].flag,
> > + nodes[j].type_flag);
> > + break;
> > + case TYPE_GATE:
> > + clk = zynqmp_clk_register_gate(NULL, clk_out, clk_id,
> > + parent_names, 1,
> > + nodes[j].flag,
> > + nodes[j].type_flag);
> > + break;
> > + default:
> > + pr_err("%s() Unknown topology for %s\n",
> > + __func__, clk_out);
> > + break;
> > + }
> > + if (IS_ERR(clk))
> > + pr_warn_once("%s() %s register fail with %ld\n",
> > + __func__, clk_name, PTR_ERR(clk));
> > +
> > + parent_names[0] = clk_out;
> > + }
> > + kfree(clk_out);
> > + return clk;
> > +}
> > +
> > +/**
> > + * zynqmp_register_clocks: Register clocks
> > + * @np: Device node
> > + *
> > + * Return: 0: Success
> > + * Error code: failure
> > + */
> > +static int zynqmp_register_clocks(struct device_node *np)
> > +{
> > + int ret;
> > + u32 i, total_parents = 0, type = 0;
> > + const char *parent_names[MAX_PARENT];
> > +
> > + for (i = 0; i < clock_max_idx; i++) {
> > + char clk_name[MAX_NAME_LEN];
> > +
> > + /* get clock name, continue to next clock if name not found */
> > + if (zynqmp_get_clock_name(i, clk_name))
> > + continue;
> > +
> > + /* Check if clock is valid and output clock.
> > + * Do not regiter invalid or external clock.
> > + */
> > + ret = get_clock_type(i, &type);
> > + if (ret || type != CLK_TYPE_OUTPUT)
> > + continue;
> > +
> > + /* Get parents of clock*/
> > + if (get_parent_list(np, i, parent_names, &total_parents)) {
> > + WARN_ONCE(1, "No parents found for %s\n",
> > + clock[i].clk_name);
> > + continue;
> > + }
> > +
> > + zynqmp_clks[i] = zynqmp_register_clk_topology(i, clk_name,
> > + total_parents,
> > + parent_names);
> > +
> > + /* Enable clock if init_enable flag is 1 */
> > + if (clock[i].init_enable)
> > + clk_prepare_enable(zynqmp_clks[i]);
> > + }
> > +
> > + for (i = 0; i < clock_max_idx; i++) {
> > + if (IS_ERR(zynqmp_clks[i])) {
> > + pr_err("Zynq Ultrascale+ MPSoC clk %s: register failed with
> %ld\n",
> > + clock[i].clk_name, PTR_ERR(zynqmp_clks[i]));
> > + WARN_ON(1);
> > + }
> > + }
> > + return 0;
> > +}
> > +
> > +/**
> > + * zynqmp_get_clock_info - Get clock information from firmware using
> PM_API
> > + */
> > +static void zynqmp_get_clock_info(void)
> > +{
> > + int i, ret;
> > + u32 attr, type = 0;
> > +
> > + memset(clock, 0, sizeof(clock));
> > + for (i = 0; i < MAX_CLOCK; i++) {
> > + zynqmp_pm_clock_get_name(i, clock[i].clk_name);
> > + if (!strncmp(clock[i].clk_name, END_OF_CLK_NAME,
> > + MAX_NAME_LEN)) {
> > + clock_max_idx = i;
> > + break;
> > + } else if (!strncmp(clock[i].clk_name, RESERVED_CLK_NAME,
> > + MAX_NAME_LEN)) {
> > + continue;
> > + }
> > +
> > + ret = zynqmp_pm_clock_get_attributes(i, &attr);
> > + if (ret)
> > + continue;
> > +
> > + clock[i].valid = attr & CLK_VALID_MASK;
> > + clock[i].init_enable = !!(attr & CLK_INIT_ENABLE_MASK);
> > + clock[i].type = attr >> CLK_TYPE_SHIFT ? CLK_TYPE_EXTERNAL :
> > + CLK_TYPE_OUTPUT;
> > + }
> > +
> > + /* Get topology of all clock */
> > + for (i = 0; i < clock_max_idx; i++) {
> > + ret = get_clock_type(i, &type);
> > + if (ret || type != CLK_TYPE_OUTPUT)
> > + continue;
> > +
> > + ret = clock_get_topology(i, clock[i].node, &clock[i].num_nodes);
> > + if (ret)
> > + continue;
> > +
> > + ret = clock_get_parents(i, clock[i].parent,
> > + &clock[i].num_parents);
> > + if (ret)
> > + continue;
> > + }
> > +}
> > +
> > +/**
> > + * zynqmp_clk_setup - Setup the clock framework and register clocks
> > + * @np: Device node
> > + */
> > +static void __init zynqmp_clk_setup(struct device_node *np)
> > +{
> > + int idx;
> > +
> > + idx = of_property_match_string(np, "clock-names", "pss_ref_clk");
> > + if (idx < 0) {
> > + pr_err("pss_ref_clk not provided\n");
> > + return;
> > + }
> > + idx = of_property_match_string(np, "clock-names", "video_clk");
> > + if (idx < 0) {
> > + pr_err("video_clk not provided\n");
> > + return;
> > + }
> > + idx = of_property_match_string(np, "clock-names", "pss_alt_ref_clk");
> > + if (idx < 0) {
> > + pr_err("pss_alt_ref_clk not provided\n");
> > + return;
> > + }
> > + idx = of_property_match_string(np, "clock-names", "aux_ref_clk");
> > + if (idx < 0) {
> > + pr_err("aux_ref_clk not provided\n");
> > + return;
> > + }
> > + idx = of_property_match_string(np, "clock-names", "gt_crx_ref_clk");
> > + if (idx < 0) {
> > + pr_err("aux_ref_clk not provided\n");
> > + return;
> > + }
> > +
> > + zynqmp_get_clock_info();
> > + zynqmp_register_clocks(np);
> > +
> > + zynqmp_clk_data.clks = zynqmp_clks;
> > + zynqmp_clk_data.clk_num = clock_max_idx;
> > + of_clk_add_provider(np, of_clk_src_onecell_get, &zynqmp_clk_data);
> > +}
> > +
> > +/**
> > + * zynqmp_clock_init - Initialize zynqmp clocks
> > + *
> > + * Return: 0 always
> > + */
> > +static int __init zynqmp_clock_init(void)
> > +{
> > + struct device_node *np;
> > +
> > + np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp-clkc");
> > + if (!np) {
> > + pr_err("%s: clkc node not found\n", __func__);
> > + of_node_put(np);
> > + return 0;
> > + }
> > +
> > + eemi_ops = get_eemi_ops();
> > + if (!eemi_ops || !eemi_ops->query_data) {
> > + pr_err("%s: clk data not found\n", __func__);
> > + of_node_put(np);
> > + return 0;
> > + }
> > +
> > + zynqmp_clk_setup(np);
> > +
> > + return 0;
> > +}
> > +arch_initcall(zynqmp_clock_init);
> > diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
> > new file mode 100644
> > index 0000000..1a1473c
> > --- /dev/null
> > +++ b/drivers/clk/zynqmp/divider.c
> > @@ -0,0 +1,239 @@
> > +/*
> > + * Zynq UltraScale+ MPSoC Divider support
> > + *
> > + * Copyright (C) 2016-2017 Xilinx
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
>
> Same as above: This tag should be on the fist line this way:
> // SPDX-License-Identifier: GPL-2.0+
>
> > + *
> > + * Adjustable divider clock implementation
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/clk/zynqmp.h>
> > +#include <linux/module.h>
> > +#include <linux/slab.h>
> > +#include <linux/io.h>
> > +#include <linux/err.h>
> > +#include <linux/string.h>
> > +#include <linux/log2.h>
> > +
> > +/*
> > + * DOC: basic adjustable divider clock that cannot gate
> > + *
> > + * Traits of this clock:
> > + * prepare - clk_prepare only ensures that parents are prepared
> > + * enable - clk_enable only ensures that parents are enabled
> > + * rate - rate is adjustable. clk->rate = ceiling(parent->rate / divisor)
> > + * parent - fixed parent. No clk_set_parent support
> > + */
> > +
> > +#define to_zynqmp_clk_divider(_hw) \
> > + container_of(_hw, struct zynqmp_clk_divider, hw)
> > +
> > +/**
> > + * struct zynqmp_clk_divider - adjustable divider clock
> > + *
> > + * @hw: handle between common and hardware-specific interfaces
> > + * @flags: Hardware specific flags
> > + * @clk_id: Id of clock
> > + * @div_type: divisor type (TYPE_DIV1 or TYPE_DIV2)
> > + */
> > +struct zynqmp_clk_divider {
> > + struct clk_hw hw;
> > + u8 flags;
> > + u32 clk_id;
> > + u32 div_type;
> > +};
> > +
> > +static int zynqmp_divider_get_val(unsigned long parent_rate, unsigned long
> rate)
> > +{
> > + return DIV_ROUND_UP_ULL((u64)parent_rate, rate);
> > +}
> > +
> > +static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate)
> > +{
> > + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = divider->clk_id;
> > + u32 div_type = divider->div_type;
> > + u32 div, value;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_getdivider)
> > + return -ENXIO;
> > +
> > + ret = eemi_ops->clock_getdivider(clk_id, &div);
> > +
> > + if (ret)
> > + pr_warn_once("%s() get divider failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + if (div_type == TYPE_DIV1)
> > + value = div & 0xFFFF;
> > + else
> > + value = (div >> 16) & 0xFFFF;
> > +
> > + return zynqmp_divider_get_val((u64)parent_rate, value);
> > +}
> > +
> > +static long zynqmp_clk_divider_round_rate(struct clk_hw *hw,
> > + unsigned long rate,
> > + unsigned long *prate)
> > +{
> > + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = divider->clk_id;
> > + u32 div_type = divider->div_type;
> > + u32 bestdiv;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_getdivider)
> > + return -ENXIO;
> > +
> > + /* if read only, just return current value */
> > + if (divider->flags & CLK_DIVIDER_READ_ONLY) {
> > + ret = eemi_ops->clock_getdivider(clk_id, &bestdiv);
> > +
> > + if (ret)
> > + pr_warn_once("%s() get divider failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > + if (div_type == TYPE_DIV1)
> > + bestdiv = bestdiv & 0xFFFF;
> > + else
> > + bestdiv = (bestdiv >> 16) & 0xFFFF;
> > +
> > + return DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
> > + }
> > +
> > + bestdiv = zynqmp_divider_get_val(*prate, rate);
> > +
> > + if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) &&
> > + ((clk_hw_get_flags(hw) & CLK_FRAC)))
> > + bestdiv = rate % *prate ? 1 : bestdiv;
> > + *prate = rate * bestdiv;
> > +
> > + return rate;
> > +}
> > +
> > +/**
> > + * zynqmp_clk_divider_set_rate - Set rate of divider clock
> > + * @hw: handle between common and hardware-specific interfaces
> > + * @rate: rate of clock to be set
> > + * @parent_rate: rate of parent clock
> > + *
> > + * Return: 0 always
> > + */
> > +static int zynqmp_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long parent_rate)
> > +{
> > + struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = divider->clk_id;
> > + u32 div_type = divider->div_type;
> > + u32 value, div;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_setdivider)
> > + return -ENXIO;
> > +
> > + value = zynqmp_divider_get_val(parent_rate, rate);
> > + if (div_type == TYPE_DIV1) {
> > + div = value & 0xFFFF;
> > + div |= ((u16)-1) << 16;
> > + } else {
> > + div = ((u16)-1);
> > + div |= value << 16;
> > + }
> > +
> > + ret = eemi_ops->clock_setdivider(clk_id, div);
> > +
> > + if (ret)
> > + pr_warn_once("%s() set divider failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct clk_ops zynqmp_clk_divider_ops = {
> > + .recalc_rate = zynqmp_clk_divider_recalc_rate,
> > + .round_rate = zynqmp_clk_divider_round_rate,
> > + .set_rate = zynqmp_clk_divider_set_rate,
> > +};
> > +
> > +/**
> > + * _register_divider - register a divider clock
> > + * @dev: device registering this clock
> > + * @name: name of this clock
> > + * @clk_id: Id of clock
> > + * @div_type: Type of divisor
> > + * @parents: name of clock's parents
> > + * @num_parents: number of parents
> > + * @flags: framework-specific flags
> > + * @clk_divider_flags: divider-specific flags for this clock
> > + *
> > + * Return: handle to registered clock divider
> > + */
> > +static struct clk *_register_divider(struct device *dev, const char *name,
> > + u32 clk_id, u32 div_type,
> > + const char * const *parents,
> > + u8 num_parents, unsigned long flags,
> > + u8 clk_divider_flags)
> > +{
> > + struct zynqmp_clk_divider *div;
> > + struct clk *clk;
> > + struct clk_init_data init;
> > +
> > + /* allocate the divider */
> > + div = kzalloc(sizeof(*div), GFP_KERNEL);
> > + if (!div)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + init.name = name;
> > + init.ops = &zynqmp_clk_divider_ops;
> > + init.flags = flags;
> > + init.parent_names = parents;
> > + init.num_parents = num_parents;
> > +
> > + /* struct clk_divider assignments */
> > + div->flags = clk_divider_flags;
> > + div->hw.init = &init;
> > + div->clk_id = clk_id;
> > + div->div_type = div_type;
> > +
> > + /* register the clock */
> > + clk = clk_register(dev, &div->hw);
> > +
> > + if (IS_ERR(clk))
> > + kfree(div);
> > +
> > + return clk;
> > +}
> > +
> > +/**
> > + * zynqmp_clk_register_divider - register a divider clock
> > + * @dev: device registering this clock
> > + * @name: name of this clock
> > + * @clk_id: Id of clock
> > + * @div_type: Type of divisor
> > + * @parents: name of clock's parents
> > + * @num_parents: number of parents
> > + * @flags: framework-specific flags
> > + * @clk_divider_flags: divider-specific flags for this clock
> > + *
> > + * Return: handle to registered clock divider
> > + */
> > +struct clk *zynqmp_clk_register_divider(struct device *dev, const char
> *name,
> > + u32 clk_id, u32 div_type,
> > + const char * const *parents,
> > + u8 num_parents, unsigned long flags,
> > + u8 clk_divider_flags)
> > +{
> > + return _register_divider(dev, name, clk_id, div_type, parents,
> > + num_parents, flags, clk_divider_flags);
> > +}
> > +EXPORT_SYMBOL_GPL(zynqmp_clk_register_divider);
> > diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
> > new file mode 100644
> > index 0000000..75def21
> > --- /dev/null
> > +++ b/drivers/clk/zynqmp/pll.c
> > @@ -0,0 +1,384 @@
> > +/*
> > + * Zynq UltraScale+ MPSoC PLL driver
> > + *
> > + * Copyright (C) 2016-2017 Xilinx
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
>
> Same as above: This tag should be on the fist line this way:
> // SPDX-License-Identifier: GPL-2.0+
>
> > + */
> > +#include <linux/clk.h>
> > +#include <linux/clk/zynqmp.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/slab.h>
> > +#include <linux/io.h>
> > +
> > +/**
> > + * struct zynqmp_pll - Structure for PLL clock
> > + * @hw: Handle between common and hardware-specific interfaces
> > + * @clk_id: PLL clock ID
> > + */
> > +struct zynqmp_pll {
> > + struct clk_hw hw;
> > + u32 clk_id;
> > +};
> > +
> > +#define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw)
> > +
> > +/* Register bitfield defines */
> > +#define PLLCTRL_FBDIV_MASK 0x7f00
> > +#define PLLCTRL_FBDIV_SHIFT 8
> > +#define PLLCTRL_BP_MASK BIT(3)
> > +#define PLLCTRL_DIV2_MASK BIT(16)
> > +#define PLLCTRL_RESET_MASK 1
> > +#define PLLCTRL_RESET_VAL 1
> > +#define PLL_STATUS_LOCKED 1
> > +#define PLLCTRL_RESET_SHIFT 0
> > +#define PLLCTRL_DIV2_SHIFT 16
> > +
> > +#define PLL_FBDIV_MIN 25
> > +#define PLL_FBDIV_MAX 125
> > +
> > +#define PS_PLL_VCO_MIN 1500000000
> > +#define PS_PLL_VCO_MAX 3000000000UL
> > +
> > +enum pll_mode {
> > + PLL_MODE_INT,
> > + PLL_MODE_FRAC,
> > +};
> > +
> > +#define FRAC_OFFSET 0x8
> > +#define PLLFCFG_FRAC_EN BIT(31)
> > +#define FRAC_DIV 0x10000 /* 2^16 */
> > +
> > +/**
> > + * pll_get_mode - Get mode of PLL
> > + * @hw: Handle between common and hardware-specific interfaces
> > + *
> > + * Return: Mode of PLL
> > + */
> > +static inline enum pll_mode pll_get_mode(struct clk_hw *hw)
> > +{
> > + struct zynqmp_pll *clk = to_zynqmp_pll(hw);
> > + u32 clk_id = clk->clk_id;
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 ret_payload[PAYLOAD_ARG_CNT];
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->ioctl)
> > + return -ENXIO;
> > +
> > + ret = eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_MODE, clk_id, 0,
> > + ret_payload);
> > + if (ret)
> > + pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + return ret_payload[1];
> > +}
> > +
> > +/**
> > + * pll_set_mode - Set the PLL mode
> > + * @hw: Handle between common and hardware-specific interfaces
> > + * @on: Flag to determine the mode
> > + */
> > +static inline void pll_set_mode(struct clk_hw *hw, bool on)
> > +{
> > + struct zynqmp_pll *clk = to_zynqmp_pll(hw);
> > + u32 clk_id = clk->clk_id;
> > + const char *clk_name = clk_hw_get_name(hw);
> > + int ret;
> > + u32 mode;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->ioctl) {
> > + pr_warn_once("eemi_ops not found\n");
> > + return;
> > + }
> > +
> > + if (on)
> > + mode = PLL_MODE_FRAC;
> > + else
> > + mode = PLL_MODE_INT;
> > +
> > + ret = eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode,
> NULL);
> > + if (ret)
> > + pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +}
> > +
> > +/**
> > + * zynqmp_pll_round_rate - Round a clock frequency
> > + * @hw: Handle between common and hardware-specific interfaces
> > + * @rate: Desired clock frequency
> > + * @prate: Clock frequency of parent clock
> > + *
> > + * Return: Frequency closest to @rate the hardware can generate
> > + */
> > +static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long *prate)
> > +{
> > + u32 fbdiv;
> > + long rate_div, f;
> > +
> > + /* Enable the fractional mode if needed */
> > + rate_div = ((rate * FRAC_DIV) / *prate);
> > + f = rate_div % FRAC_DIV;
> > + pll_set_mode(hw, !!f);
> > +
> > + if (pll_get_mode(hw) == PLL_MODE_FRAC) {
> > + if (rate > PS_PLL_VCO_MAX) {
> > + fbdiv = rate / PS_PLL_VCO_MAX;
> > + rate = rate / (fbdiv + 1);
> > + }
> > + if (rate < PS_PLL_VCO_MIN) {
> > + fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate);
> > + rate = rate * fbdiv;
> > + }
> > + return rate;
> > + }
> > +
> > + fbdiv = DIV_ROUND_CLOSEST(rate, *prate);
> > + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
> > + return *prate * fbdiv;
> > +}
> > +
> > +/**
> > + * zynqmp_pll_recalc_rate - Recalculate clock frequency
> > + * @hw: Handle between common and hardware-specific
> interfaces
> > + * @parent_rate: Clock frequency of parent clock
> > + * Return: Current clock frequency
> > + */
> > +static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate)
> > +{
> > + struct zynqmp_pll *clk = to_zynqmp_pll(hw);
> > + u32 clk_id = clk->clk_id;
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 fbdiv, data;
> > + unsigned long rate, frac;
> > + u32 ret_payload[PAYLOAD_ARG_CNT];
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_getdivider)
> > + return 0;
> > +
> > + /*
> > + * makes probably sense to redundantly save fbdiv in the struct
> > + * zynqmp_pll to save the IO access.
> > + */
> > + ret = eemi_ops->clock_getdivider(clk_id, &fbdiv);
> > + if (ret)
> > + pr_warn_once("%s() get divider failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + rate = parent_rate * fbdiv;
> > + if (pll_get_mode(hw) == PLL_MODE_FRAC) {
> > + eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_DATA, clk_id, 0,
> > + ret_payload);
> > + data = ret_payload[1];
> > + frac = (parent_rate * data) / FRAC_DIV;
> > + rate = rate + frac;
> > + }
> > +
> > + return rate;
> > +}
> > +
> > +/**
> > + * zynqmp_pll_set_rate - Set rate of PLL
> > + * @hw: Handle between common and hardware-specific
> interfaces
> > + * @rate: Frequency of clock to be set
> > + * @parent_rate: Clock frequency of parent clock
> > + */
> > +static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long parent_rate)
> > +{
> > + struct zynqmp_pll *clk = to_zynqmp_pll(hw);
> > + u32 clk_id = clk->clk_id;
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 fbdiv, data;
> > + long rate_div, frac, m, f;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_setdivider)
> > + return -ENXIO;
> > +
> > + if (pll_get_mode(hw) == PLL_MODE_FRAC) {
> > + unsigned int children;
> > +
> > + /*
> > + * We're running on a ZynqMP compatible machine, make sure the
> > + * VPLL only has one child.
> > + */
> > + children = clk_get_children("vpll");
> > +
> > + /* Account for vpll_to_lpd and dp_video_ref */
> > + if (children > 2)
> > + WARN(1, "Two devices are using vpll which is forbidden\n");
> > +
> > + rate_div = ((rate * FRAC_DIV) / parent_rate);
> > + m = rate_div / FRAC_DIV;
> > + f = rate_div % FRAC_DIV;
> > + m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX));
> > + rate = parent_rate * m;
> > + frac = (parent_rate * f) / FRAC_DIV;
> > +
> > + ret = eemi_ops->clock_setdivider(clk_id, m);
> > + if (ret)
> > + pr_warn_once("%s() set divider failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + data = (FRAC_DIV * f) / FRAC_DIV;
> > + eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, data, NULL);
> > +
> > + return (rate + frac);
> > + }
> > +
> > + fbdiv = DIV_ROUND_CLOSEST(rate, parent_rate);
> > + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
> > + ret = eemi_ops->clock_setdivider(clk_id, fbdiv);
> > + if (ret)
> > + pr_warn_once("%s() set divider failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + return parent_rate * fbdiv;
> > +}
> > +
> > +/**
> > + * zynqmp_pll_is_enabled - Check if a clock is enabled
> > + * @hw: Handle between common and hardware-specific interfaces
> > + *
> > + * Return: 1 if the clock is enabled, 0 otherwise
> > + */
> > +static int zynqmp_pll_is_enabled(struct clk_hw *hw)
> > +{
> > + struct zynqmp_pll *clk = to_zynqmp_pll(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = clk->clk_id;
> > + unsigned int state;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_getstate)
> > + return 0;
> > +
> > + ret = eemi_ops->clock_getstate(clk_id, &state);
> > + if (ret)
> > + pr_warn_once("%s() clock get state failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + return state ? 1 : 0;
> > +}
> > +
> > +/**
> > + * zynqmp_pll_enable - Enable clock
> > + * @hw: Handle between common and hardware-specific interfaces
> > + *
> > + * Return: 0 always
> > + */
> > +static int zynqmp_pll_enable(struct clk_hw *hw)
> > +{
> > + struct zynqmp_pll *clk = to_zynqmp_pll(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = clk->clk_id;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_enable)
> > + return 0;
> > +
> > + if (zynqmp_pll_is_enabled(hw))
> > + return 0;
> > +
> > + pr_info("PLL: enable\n");
> > +
> > + ret = eemi_ops->clock_enable(clk_id);
> > + if (ret)
> > + pr_warn_once("%s() clock enable failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * zynqmp_pll_disable - Disable clock
> > + * @hw: Handle between common and hardware-specific interfaces
> > + *
> > + */
> > +static void zynqmp_pll_disable(struct clk_hw *hw)
> > +{
> > + struct zynqmp_pll *clk = to_zynqmp_pll(hw);
> > + const char *clk_name = clk_hw_get_name(hw);
> > + u32 clk_id = clk->clk_id;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops = get_eemi_ops();
> > +
> > + if (!eemi_ops || !eemi_ops->clock_disable)
> > + return;
> > +
> > + if (!zynqmp_pll_is_enabled(hw))
> > + return;
> > +
> > + pr_info("PLL: shutdown\n");
> > +
> > + ret = eemi_ops->clock_disable(clk_id);
> > + if (ret)
> > + pr_warn_once("%s() clock disable failed for %s, ret = %d\n",
> > + __func__, clk_name, ret);
> > +}
> > +
> > +static const struct clk_ops zynqmp_pll_ops = {
> > + .enable = zynqmp_pll_enable,
> > + .disable = zynqmp_pll_disable,
> > + .is_enabled = zynqmp_pll_is_enabled,
> > + .round_rate = zynqmp_pll_round_rate,
> > + .recalc_rate = zynqmp_pll_recalc_rate,
> > + .set_rate = zynqmp_pll_set_rate,
> > +};
> > +
> > +/**
> > + * clk_register_zynqmp_pll - Register PLL with the clock framework
> > + * @name: PLL name
> > + * @flag: PLL flags
> > + * @parents: Parent clock names
> > + * @num_parents:Number of parents
> > + * @pll_ctrl: Pointer to PLL control register
> > + * @pll_status: Pointer to PLL status register
> > + * @lock_index: Bit index to this PLL's lock status bit in @pll_status
> > + *
> > + * Return: Handle to the registered clock
> > + */
> > +struct clk *clk_register_zynqmp_pll(const char *name, u32 clk_id,
> > + const char * const *parents,
> > + u8 num_parents, unsigned long flag)
> > +{
> > + struct zynqmp_pll *pll;
> > + struct clk *clk;
> > + struct clk_init_data init;
> > + int status;
> > +
> > + init.name = name;
> > + init.ops = &zynqmp_pll_ops;
> > + init.flags = flag;
> > + init.parent_names = parents;
> > + init.num_parents = num_parents;
> > +
> > + pll = kmalloc(sizeof(*pll), GFP_KERNEL);
> > + if (!pll)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + /* Populate the struct */
> > + pll->hw.init = &init;
> > + pll->clk_id = clk_id;
> > +
> > + clk = clk_register(NULL, &pll->hw);
> > + if (WARN_ON(IS_ERR(clk)))
> > + kfree(pll);
> > +
> > + status = clk_set_rate_range(clk, PS_PLL_VCO_MIN, PS_PLL_VCO_MAX);
> > + if (status < 0)
> > + pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, status);
> > +
> > + return clk;
> > +}
> > diff --git a/include/linux/clk/zynqmp.h b/include/linux/clk/zynqmp.h
> > new file mode 100644
> > index 0000000..024ebf8
> > --- /dev/null
> > +++ b/include/linux/clk/zynqmp.h
> > @@ -0,0 +1,46 @@
> > +/*
> > + * Copyright (C) 2016-2017 Xilinx
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
>
> This tag should be on the fist line this way:
> /* SPDX-License-Identifier: GPL-2.0+ */
>
> > +
> > +#ifndef __LINUX_CLK_ZYNQMP_H_
> > +#define __LINUX_CLK_ZYNQMP_H_
> > +
> > +#include <linux/spinlock.h>
> > +#include <linux/firmware/xilinx/zynqmp/firmware.h>
> > +
> > +#define CLK_FRAC BIT(13) /* has a fractional parent */
> > +
> > +struct device;
> > +
> > +struct clk *clk_register_zynqmp_pll(const char *name, u32 clk_id,
> > + const char * const *parent, u8 num_parents,
> > + unsigned long flag);
> > +
> > +struct clk *zynqmp_clk_register_gate(struct device *dev, const char *name,
> > + u32 clk_id,
> > + const char * const *parent_name,
> > + u8 num_parents, unsigned long flags,
> > + u8 clk_gate_flags);
> > +
> > +struct clk *zynqmp_clk_register_divider(struct device *dev, const char
> *name,
> > + u32 clk_id, u32 div_type,
> > + const char * const *parent_name,
> > + u8 num_parents,
> > + unsigned long flags,
> > + u8 clk_divider_flags);
> > +
> > +struct clk *zynqmp_clk_register_mux(struct device *dev, const char *name,
> > + u32 clk_id,
> > + const char **parent_names,
> > + u8 num_parents, unsigned long flags,
> > + u8 clk_mux_flags);
> > +
> > +struct clk *zynqmp_clk_register_mux_table(struct device *dev, const char
> *name,
> > + u32 clk_id,
> > + const char * const *parent_names,
> > + u8 num_parents, unsigned long flags,
> > + u8 clk_mux_flags);
> > +
> > +#endif
> > --
> > 2.7.4
> >
>
>
> --
> Cordially
> Philippe Ombredanne