Re: [PATCH v10 01/22] net: hns: Add reset function support for RoCE driver

From: oulijun
Date: Mon Jun 27 2016 - 02:42:23 EST

Next message: Wei, Jiangang: "Re: RFC: Fix kdump failed with 'notsc'"
Previous message: Tobias Klauser: "Re: [PATCH 1/2] net: ethernet: ethoc: use phydev from struct net_device"
In reply to: Leon Romanovsky: "Re: [PATCH v10 01/22] net: hns: Add reset function support for RoCE driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi, Leon

å 2016/6/24 19:49, Leon Romanovsky åé:
> On Thu, Jun 16, 2016 at 10:35:09PM +0800, Lijun Ou wrote:
>> It added reset function for RoCE driver. RoCE is a feature of hns.
>> In hip06 SoC, in RoCE reset process, it's needed to configure dsaf
>> channel reset, port and sl map info. Reset function of RoCE is
>> located in dsaf module, we only call it in RoCE driver when needed.
>>
>> Signed-off-by: Wei Hu <xavier.huwei@xxxxxxxxxx>
>> Signed-off-by: Nenglong Zhao <zhaonenglong@xxxxxxxxxxxxx>
>> Signed-off-by: Lijun Ou <oulijun@xxxxxxxxxx>
>> Signed-off-by: Sheng Li <lisheng011@xxxxxxxxxx>
>> ---
>> PATCH v9/v8/v7:
>> - No change over PATCH v6
>>
>> PATCH v6:
>> This fixes the comments given by Leon Romanovsky over the PATCH v5:
>> Link: https://lkml.org/lkml/2016/5/3/733
>>
>> PATCH v5/v4/v3:
>> - No change over PATCH v2
>>
>> PATCH v2:
>> This fixes the comments given by Leon Romanovsky over the PATCH v1:
>> Link: https://lkml.org/lkml/2016/3/12/46
>>
>> PATCH v1:
>> - The initial patch
>> ---
>> ---
>> drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 84 ++++++++++++++++++++++
>> drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h | 30 ++++++++
>> drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 36 ++++++++++
>> drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h | 14 +++-
>> 4 files changed, 163 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
>> index 1c2ddb2..0c4a87c 100644
>> --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
>> +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
>> @@ -14,6 +14,7 @@
>> #include <linux/module.h>
>> #include <linux/netdevice.h>
>> #include <linux/mfd/syscon.h>
>> +#include <linux/of_platform.h>
>> #include <linux/of.h>
>> #include <linux/of_address.h>
>> #include <linux/of_irq.h>
>> @@ -2685,6 +2686,89 @@ static struct platform_driver g_dsaf_driver = {
>>
>> module_platform_driver(g_dsaf_driver);
>>
>> +/**
>> + * hns_dsaf_roce_reset - reset dsaf and roce
>> + * @dsaf_fwnode: Pointer to framework node for the dasf
>> + * @enable: false - request reset , true - drop reset
>> + * retuen 0 - success , negative -fail
>> + */
>> +int hns_dsaf_roce_reset(struct fwnode_handle *dsaf_fwnode, bool enable)
>> +{
>> + struct dsaf_device *dsaf_dev;
>> + struct platform_device *pdev;
>> + unsigned int mp;
>> + unsigned int sl;
>> + unsigned int credit;
>> + int i;
>> + const u32 port_map[DSAF_ROCE_CREDIT_CHN][DSAF_ROCE_CHAN_MODE_NUM] = {
>> + {DSAF_ROCE_PORT_0, DSAF_ROCE_PORT_0, DSAF_ROCE_PORT_0},
>> + {DSAF_ROCE_PORT_1, DSAF_ROCE_PORT_0, DSAF_ROCE_PORT_0},
>> + {DSAF_ROCE_PORT_2, DSAF_ROCE_PORT_1, DSAF_ROCE_PORT_0},
>> + {DSAF_ROCE_PORT_3, DSAF_ROCE_PORT_1, DSAF_ROCE_PORT_0},
>> + {DSAF_ROCE_PORT_4, DSAF_ROCE_PORT_2, DSAF_ROCE_PORT_1},
>> + {DSAF_ROCE_PORT_4, DSAF_ROCE_PORT_2, DSAF_ROCE_PORT_1},
>> + {DSAF_ROCE_PORT_5, DSAF_ROCE_PORT_3, DSAF_ROCE_PORT_1},
>> + {DSAF_ROCE_PORT_5, DSAF_ROCE_PORT_3, DSAF_ROCE_PORT_1},
>> + };
>> + const u32 sl_map[DSAF_ROCE_CREDIT_CHN][DSAF_ROCE_CHAN_MODE_NUM] = {
>> + {DSAF_ROCE_SL_0, DSAF_ROCE_SL_0, DSAF_ROCE_SL_0},
>> + {DSAF_ROCE_SL_0, DSAF_ROCE_SL_1, DSAF_ROCE_SL_1},
>> + {DSAF_ROCE_SL_0, DSAF_ROCE_SL_0, DSAF_ROCE_SL_2},
>> + {DSAF_ROCE_SL_0, DSAF_ROCE_SL_1, DSAF_ROCE_SL_3},
>> + {DSAF_ROCE_SL_0, DSAF_ROCE_SL_0, DSAF_ROCE_SL_0},
>> + {DSAF_ROCE_SL_1, DSAF_ROCE_SL_1, DSAF_ROCE_SL_1},
>> + {DSAF_ROCE_SL_0, DSAF_ROCE_SL_0, DSAF_ROCE_SL_2},
>> + {DSAF_ROCE_SL_1, DSAF_ROCE_SL_1, DSAF_ROCE_SL_3},
>> + };
>> +
>> + if (!is_of_node(dsaf_fwnode)) {
>> + pr_err("hisi_dsaf: Only support DT node!\n");
>> + return -EINVAL;
>> + }
>> + pdev = of_find_device_by_node(to_of_node(dsaf_fwnode));
>> + dsaf_dev = dev_get_drvdata(&pdev->dev);
>> + if (AE_IS_VER1(dsaf_dev->dsaf_ver)) {
>> + dev_err(dsaf_dev->dev, "%s v1 chip do not support roce!\n",
>
> chip don't support roce -> chip doesn't support RoCE
I have modified it. I will send a new patch at soon.
>
>> + dsaf_dev->ae_dev.name);
>> + return -ENODEV;
>> + }
>> +
>> + if (!enable) {
>> + /* Reset rocee-channels in dsaf and rocee */
>> + hns_dsaf_srst_chns(dsaf_dev, DSAF_CHNS_MASK, false);
>> + hns_dsaf_roce_srst(dsaf_dev, false);
>> + } else {
>> + /* Configure dsaf tx roce correspond to port map and sl map */
>> + mp = dsaf_read_dev(dsaf_dev, DSAF_ROCE_PORT_MAP_REG);
>> + for (i = 0; i < DSAF_ROCE_CREDIT_CHN; i++)
>> + dsaf_set_field(mp, 7 << i * 3, i * 3,
>> + port_map[i][DSAF_ROCE_6PORT_MODE]);
>> + dsaf_set_field(mp, 3 << i * 3, i * 3, 0);
>> + dsaf_write_dev(dsaf_dev, DSAF_ROCE_PORT_MAP_REG, mp);
>> +
>> + sl = dsaf_read_dev(dsaf_dev, DSAF_ROCE_SL_MAP_REG);
>> + for (i = 0; i < DSAF_ROCE_CREDIT_CHN; i++)
>> + dsaf_set_field(sl, 3 << i * 2, i * 2,
>> + sl_map[i][DSAF_ROCE_6PORT_MODE]);
>> + dsaf_write_dev(dsaf_dev, DSAF_ROCE_SL_MAP_REG, sl);
>> +
>> + /* De-reset rocee-channels in dsaf and rocee */
>> + hns_dsaf_srst_chns(dsaf_dev, DSAF_CHNS_MASK, true);
>> + msleep(20);
>> + hns_dsaf_roce_srst(dsaf_dev, true);
>> +
>> + /* Eanble dsaf channel rocee credit */
>> + credit = dsaf_read_dev(dsaf_dev, DSAF_SBM_ROCEE_CFG_REG_REG);
>> + dsaf_set_bit(credit, DSAF_SBM_ROCEE_CFG_CRD_EN_B, 0);
>> + dsaf_write_dev(dsaf_dev, DSAF_SBM_ROCEE_CFG_REG_REG, credit);
>> +
>> + dsaf_set_bit(credit, DSAF_SBM_ROCEE_CFG_CRD_EN_B, 1);
>> + dsaf_write_dev(dsaf_dev, DSAF_SBM_ROCEE_CFG_REG_REG, credit);
>> + }
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(hns_dsaf_roce_reset);
>> +
>> MODULE_LICENSE("GPL");
>> MODULE_AUTHOR("Huawei Tech. Co., Ltd.");
>> MODULE_DESCRIPTION("HNS DSAF driver");
>> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h
>> index f0502ba..e9676c0 100644
>> --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h
>> +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h
>> @@ -40,6 +40,32 @@ struct hns_mac_cb;
>> #define DSAF_DUMP_REGS_NUM 504
>> #define DSAF_STATIC_NUM 28
>>
>> +#define DSAF_ROCE_CREDIT_CHN 8
>> +#define DSAF_ROCE_CHAN_MODE 3
>
> Wrong indentation
>
>> +
>> +enum dsaf_roce_port_mode {
>> + DSAF_ROCE_6PORT_MODE,
>> + DSAF_ROCE_4PORT_MODE,
>> + DSAF_ROCE_2PORT_MODE,
>> + DSAF_ROCE_CHAN_MODE_NUM,
>> +};
>> +
>> +enum dsaf_roce_port_num {
>> + DSAF_ROCE_PORT_0 = 0,
>> + DSAF_ROCE_PORT_1 = 1,
>> + DSAF_ROCE_PORT_2 = 2,
>> + DSAF_ROCE_PORT_3 = 3,
>> + DSAF_ROCE_PORT_4 = 4,
>> + DSAF_ROCE_PORT_5 = 5,
>> +};
>> +
>> +enum dsaf_roce_qos_sl {
>> + DSAF_ROCE_SL_0 = 0,
>> + DSAF_ROCE_SL_1 = 1,
>> + DSAF_ROCE_SL_2 = 2,
>> + DSAF_ROCE_SL_3 = 3,
>> +};
>
> No need explicit values for enums.
>
Yes, I have deleted it.
>> +
>> #define DSAF_STATS_READ(p, offset) (*((u64 *)((u8 *)(p) + (offset))))
>> #define HNS_DSAF_IS_DEBUG(dev) (dev->dsaf_mode == DSAF_MODE_DISABLE_SP)
>>
>> @@ -396,6 +422,10 @@ void hns_ppe_com_srst(struct ppe_common_cb *ppe_common, u32 val);
>>
>> void hns_dsaf_fix_mac_mode(struct hns_mac_cb *mac_cb);
>>
>> +void hns_dsaf_srst_chns(struct dsaf_device *dsaf_dev, u32 msk, bool enable);
>> +
>> +void hns_dsaf_roce_srst(struct dsaf_device *dsaf_dev, bool enable);
>> +
>> int hns_dsaf_ae_init(struct dsaf_device *dsaf_dev);
>> void hns_dsaf_ae_uninit(struct dsaf_device *dsaf_dev);
>>
>> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
>> index a837bb9..da3061c 100644
>> --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
>> +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
>> @@ -165,6 +165,42 @@ void hns_dsaf_xge_core_srst_by_port(struct dsaf_device *dsaf_dev,
>> dsaf_write_sub(dsaf_dev, reg_addr, reg_val);
>> }
>>
>> +/**
>> + * hns_dsaf_srst_chns - reset dsaf channels
>> + * @dsaf_dev: dsaf device struct pointer
>> + * @msk: xbar channels mask value:
>> + * bit0-5 for xge0-5
>> + * bit6-11 for ppe0-5
>> + * bit12-17 for roce0-5
>> + * bit18-19 for com/dfx
>> + * @enable: false - request reset , true - drop reset
>> + */
>> +void hns_dsaf_srst_chns(struct dsaf_device *dsaf_dev, u32 msk, bool enable)
>> +{
>> + u32 reg_addr;
>> +
>> + if (!enable)
>> + reg_addr = DSAF_SUB_SC_DSAF_RESET_REQ_REG;
>> + else
>> + reg_addr = DSAF_SUB_SC_DSAF_RESET_DREQ_REG;
>> +
>> + dsaf_write_sub(dsaf_dev, reg_addr, msk);
>> +}
>> +
>> +void hns_dsaf_roce_srst(struct dsaf_device *dsaf_dev, bool enable)
>> +{
>> + if (!enable) {
>> + dsaf_write_sub(dsaf_dev, DSAF_SUB_SC_ROCEE_RESET_REQ_REG, 1);
>> + } else {
>> + dsaf_write_sub(dsaf_dev,
>> + DSAF_SUB_SC_ROCEE_CLK_DIS_REG, 1);
>> + dsaf_write_sub(dsaf_dev,
>> + DSAF_SUB_SC_ROCEE_RESET_DREQ_REG, 1);
>> + msleep(20);
>> + dsaf_write_sub(dsaf_dev, DSAF_SUB_SC_ROCEE_CLK_EN_REG, 1);
>> + }
>> +}
>> +
>> void hns_dsaf_ge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
>> {
>> u32 reg_val_1;
>> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
>> index 7c3b510..6b878fe 100644
>> --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
>> +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
>> @@ -77,6 +77,12 @@
>> #define DSAF_SUB_SC_PPE_RESET_DREQ_REG 0xA4C
>> #define DSAF_SUB_SC_RCB_PPE_COM_RESET_REQ_REG 0xA88
>> #define DSAF_SUB_SC_RCB_PPE_COM_RESET_DREQ_REG 0xA8C
>> +#define DSAF_SUB_SC_DSAF_RESET_REQ_REG 0xAA8
>> +#define DSAF_SUB_SC_ROCEE_RESET_REQ_REG 0xA50
>> +#define DSAF_SUB_SC_DSAF_RESET_DREQ_REG 0xAAC
>> +#define DSAF_SUB_SC_ROCEE_CLK_DIS_REG 0x32C
>> +#define DSAF_SUB_SC_ROCEE_RESET_DREQ_REG 0xA54
>> +#define DSAF_SUB_SC_ROCEE_CLK_EN_REG 0x328
>
> Fix indentation.
>
I have checked it. no indentions with the relatived context in vi.

>> #define DSAF_SUB_SC_LIGHT_MODULE_DETECT_EN_REG 0x2060
>> #define DSAF_SUB_SC_TCAM_MBIST_EN_REG 0x2300
>> #define DSAF_SUB_SC_DSAF_CLK_ST_REG 0x5300
>> @@ -133,6 +139,8 @@
>> #define DSAF_ROCEE_INT_STS_0_REG 0x200
>> #define DSAFV2_SERDES_LBK_0_REG 0x220
>> #define DSAF_PAUSE_CFG_REG 0x240
>> +#define DSAF_ROCE_PORT_MAP_REG 0x2A0
>> +#define DSAF_ROCE_SL_MAP_REG 0x2A4
>
> Indentation
I have checked it. no indentions with the relatived context in vi.
>
>> #define DSAF_PPE_QID_CFG_0_REG 0x300
>> #define DSAF_SW_PORT_TYPE_0_REG 0x320
>> #define DSAF_STP_PORT_TYPE_0_REG 0x340
>> @@ -175,7 +183,8 @@
>> #define DSAF_SBM_BP_CFG_2_XGE_REG_0_REG 0x200C
>> #define DSAF_SBM_BP_CFG_2_PPE_REG_0_REG 0x230C
>> #define DSAF_SBM_BP_CFG_2_ROCEE_REG_0_REG 0x260C
>> -#define DSAFV2_SBM_BP_CFG_2_ROCEE_REG_0_REG 0x238C
>> +#define DSAF_SBM_ROCEE_CFG_REG_REG 0x2380
>> +#define DSAFV2_SBM_BP_CFG_2_ROCEE_REG_0_REG 0x238C
>> #define DSAF_SBM_FREE_CNT_0_0_REG 0x2010
>> #define DSAF_SBM_FREE_CNT_1_0_REG 0x2014
>> #define DSAF_SBM_BP_CNT_0_0_REG 0x2018
>> @@ -791,6 +800,9 @@
>> #define DSAFV2_SBM_CFG4_RESET_BUF_NUM_NO_PFC_S 9
>> #define DSAFV2_SBM_CFG4_RESET_BUF_NUM_NO_PFC_M (((1ULL << 9) - 1) << 9)
>>
>> +#define DSAF_CHNS_MASK 0x3f000
>> +#define DSAF_SBM_ROCEE_CFG_CRD_EN_B 2
>
> Indentation
>
I have checked it. no indentions with the relatived context in vi.

Thanks
Lijun Ou
>> +
>> #define DSAF_TBL_TCAM_ADDR_S 0
>> #define DSAF_TBL_TCAM_ADDR_M ((1ULL << 9) - 1)
>>
>> --
>> 1.9.1
>>
>
> .
>

Next message: Wei, Jiangang: "Re: RFC: Fix kdump failed with 'notsc'"
Previous message: Tobias Klauser: "Re: [PATCH 1/2] net: ethernet: ethoc: use phydev from struct net_device"
In reply to: Leon Romanovsky: "Re: [PATCH v10 01/22] net: hns: Add reset function support for RoCE driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]