Re: [RFC V2 1/2] irq: Add a framework to measure interrupt timings

[Daniel Lezcano]

On 01/21/2016 11:08 AM, Peter Zijlstra wrote:
> On Thu, Jan 21, 2016 at 10:50:27AM +0100, Daniel Lezcano wrote:
>
> > Actually, the handle passes dev_id in order to let the irqtimings to sort
> > out a shared interrupt and prevent double sampling. In other words, for
> > shared interrupts, statistics should be per t-uple(irq , dev_id) but that is
> > something I did not implemented ATM.
> >
> > IMO, the handler is at the right place. The prediction code does not take
> > care of the shared interrupts yet.
>
> That certainly added to the confusion. But if you want per dev_id stats,
> the whole alloc framework is 'broken' too, for it allocates the stuff
> per irq.

Yep, that's correct. I was planning to re-work it later by handling the 
shared interrupts, assuming they were not so common, but regarding the 
examples below, that's wrong.

> > I tried to find a platform with shared interrupts in the ones I have
> > available around me but I did not find any. Are the shared interrupts
> > something used nowadays or coming from legacy hardware ? What is the
> > priority to handle the shared interrupts in the prediction code ?
>
> They're less common (thankfully) than they used to be, but I still have
> them:
>
> root@ivb-ep:~# cat /proc/interrupts | grep ","
>    59:          0          0          0          0          0          0
>    0          0          0          0          0          0          0
>    0          0          0          0          0          0          0
>    0          0          0          0          0          0          0
>    0          0          0          0          0          0          0
>    0          0          0          0          0          0   IO-APIC
>    5-fasteoi   i801_smbus, i801_smbus
>
> root@wsm-ep:~# cat /proc/interrupts | grep ","
>   18:          0          0          0          0          0          0          0          0          0          0          0          0   IO-APIC  18-fasteoi   ehci_hcd:usb1, uhci_hcd:usb6
>   19:    9695230   19577242   13205011    3970578     740376    1138693          0          0          0          0          0          0   IO-APIC  19-fasteoi   uhci_hcd:usb5, ata_piix
>   23:          3          0          0          0        927          0          0          0          0          0          0          0   IO-APIC  23-fasteoi   ehci_hcd:usb2, uhci_hcd:usb4
>
> root@snb:~# cat /proc/interrupts | grep ","
>   19:   11058485          0          0          0          0          0          0          0   IO-APIC  19-fasteoi   ata_piix, ata_piix
>
>
> Also there's a whole host of SOCs that has them.

Ah, I see. Thank you very much for these examples.

Sounds like, I have to handle the shared interrupts sooner than what I 
was expecting ... :)

  -- Daniel



--
 <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog