Re: [PATCH] x86, perf: Tweak broken BIOS rules during check_hw_exists

From: George Dunlap
Date: Thu May 21 2015 - 14:32:17 EST


On 05/18/2015 08:16 PM, Don Zickus wrote:
> I stumbled upon an AMD box that had the BIOS using a hardware counter. Instead
> of printing out a warning and continuing, it failed and blocked further perf
> counter usage.
>
> Looking through the history, I found commit a5ebe0ba3dff had tweaked the rules
> for a xen guest on an almost identical box and now changed the behaviour.
>
> Unfortunately the rules were tweaked incorrectly and will always lead to msr
> failures even though the msrs are completely fine.
>
> What happens now is in arch/x86/kernel/cpu/perf_event.c::check_hw_exists:
>
> <snip>
> for (i = 0; i < x86_pmu.num_counters; i++) {
> reg = x86_pmu_config_addr(i);
> ret = rdmsrl_safe(reg, &val);
> if (ret)
> goto msr_fail;
> if (val & ARCH_PERFMON_EVENTSEL_ENABLE) {
> bios_fail = 1;
> val_fail = val;
> reg_fail = reg;
> }
> }
>
> <snip>
> /*
> * Read the current value, change it and read it back to see if it
> * matches, this is needed to detect certain hardware emulators
> * (qemu/kvm) that don't trap on the MSR access and always return 0s.
> */
> reg = x86_pmu_event_addr(0);
> ^^^^
>
> if the first perf counter is enabled, then this routine will always fail
> because the counter is running. :-(
>
> if (rdmsrl_safe(reg, &val))
> goto msr_fail;
> val ^= 0xffffUL;
> ret = wrmsrl_safe(reg, val);
> ret |= rdmsrl_safe(reg, &val_new);
> if (ret || val != val_new)
> goto msr_fail;
>
> The above bios_fail used to be a 'goto' which is why it worked in the past.
>
> Further, most vendors have migrated to using fixed counters to hide their
> evilness hence this problem rarely shows up now days except on a few old boxes.
>
> I fixed my problem and kept the spirit of the original Xen fix, by recording a
> safe non-enable register to be used safely for the reading/writing check.
> Because it is not enabled, this passes on bare metal boxes (like metal), but
> should continue to throw an msr_fail on Xen guests because the register isn't
> emulated yet.
>
> Now I get a proper bios_fail error message and Xen should still see their
> msr_fail message (untested).
>
> Signed-off-by: Don Zickus <dzickus@xxxxxxxxxx>

Right -- so what was actually broken was the "does this register work"
check, which needs a non-enabled register.

Would it make sense to add a comment somewhere in the code saying that
you need a disabled event counter for the MSR check to work properly?
It's sort of implied but it's not explicit.

Other than that, this looks good to me. I'm not positive I have access
to the box I needed this for anymore -- I'll take a look for it next week.

In the mean time:

Acked-by: George Dunlap <george.dunlap@xxxxxxxxxxxxx>

> ---
> arch/x86/kernel/cpu/perf_event.c | 16 +++++++++++++++-
> 1 files changed, 15 insertions(+), 1 deletions(-)
>
> diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
> index 1ee7b19..e4dc4e5 100644
> --- a/arch/x86/kernel/cpu/perf_event.c
> +++ b/arch/x86/kernel/cpu/perf_event.c
> @@ -186,6 +186,7 @@ static bool check_hw_exists(void)
> u64 val, val_fail, val_new= ~0;
> int i, reg, reg_fail, ret = 0;
> int bios_fail = 0;
> + int reg_safe = -1;
>
> /*
> * Check to see if the BIOS enabled any of the counters, if so
> @@ -200,6 +201,8 @@ static bool check_hw_exists(void)
> bios_fail = 1;
> val_fail = val;
> reg_fail = reg;
> + } else {
> + reg_safe = i;
> }
> }
>
> @@ -218,11 +221,22 @@ static bool check_hw_exists(void)
> }
>
> /*
> + * If all the counters are enabled, the below test will always
> + * fail. The tools will also become useless in this scenario.
> + * Just fail and disable the hardware counters.
> + */
> +
> + if (reg_safe == -1) {
> + reg = reg_safe;
> + goto msr_fail;
> + }
> +
> + /*
> * Read the current value, change it and read it back to see if it
> * matches, this is needed to detect certain hardware emulators
> * (qemu/kvm) that don't trap on the MSR access and always return 0s.
> */
> - reg = x86_pmu_event_addr(0);
> + reg = x86_pmu_event_addr(reg_safe);
> if (rdmsrl_safe(reg, &val))
> goto msr_fail;
> val ^= 0xffffUL;
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/