Re: [PATCH v3 0/4] Add eMMC and SD card support for rk3288-evb

From: Jaehoon Chung
Date: Thu Aug 07 2014 - 04:24:49 EST


Hi, Doug.

Acked-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>

On 08/07/2014 02:09 AM, Doug Anderson wrote:
> This series adds basic eMMC and SD card support for the rk3288-evb
> board based on Addy's posted dw_mmc patch from:
> https://patchwork.kernel.org/patch/4653631/
>
> The series is a little tricky because:
> * Jaehoon has some outstanding patches to remove the slot node. Since
> those haven't landed yet, I've posted my original patch with the
> slot node and then some future patches that can land with Jaehoon's
> patches.
>
> So just to be explicit:
> - Patch #1 and #2 can land after Addy's patch lands.
> - Patch #3 and #4 can land after Jaehoon's patch lands, though there's
> no huge hurry since Jaehoon's patch supports the old mode (it just
> prints a warning).
>
> Note that we don't have regulators specified yet (no regulator driver
> for rk808-based board). We also don't yet support UHS modes or MMC
> DDR50 (which require regulator support plus dw_mmc driver support for
> tuning). Those features can come later.
>
> Changes in v3:
> - Removed DDR50 mode since it needs tuning, which isn't there yet.
>
> Changes in v2:
> - New patchwork link for Addy's patch
> - Squashed in the DDR50 mode since Addy spun his patch.
> - Refer to the new title of Jaehoon's patch
>
> Doug Anderson (4):
> ARM: dts: Add emmc and sdmmc to the rk3288 device tree
> ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards
> ARM: dts: Take the mmc slot node out of rk3288-evb
> ARM: dts: mmc slot node gone on rk3288 => no more address / size cells
>
> arch/arm/boot/dts/rk3288-evb.dtsi | 24 ++++++++++++++++++++++++
> arch/arm/boot/dts/rk3288.dtsi | 18 ++++++++++++++++++
> 2 files changed, 42 insertions(+)
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/