Re: [linux-sunxi] [PATCH v2 3/7] phy: usb: sunxi: Introduce Allwinner A31 USB PHY support

From: Kishon Vijay Abraham I
Date: Mon May 12 2014 - 08:25:29 EST


Hi,

On Monday 12 May 2014 05:29 PM, Hans de Goede wrote:
> Hi,
>
> On 05/12/2014 11:14 AM, Chen-Yu Tsai wrote:
>> Hi,
>>
>> On Sat, May 10, 2014 at 8:56 PM, Maxime Ripard
>> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
>>> The USB phy controller in the A31 differs mostly from the older controllers
>>> because it has a clock dedicated for each phy, while the older ones were having
>>> a single clock for all the phys.
>>>
>>> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
>>> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
>>> ---
>>> drivers/phy/phy-sun4i-usb.c | 35 ++++++++++++++++++++++++++---------
>>> 1 file changed, 26 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
>>> index e6e6c4ba7145..8bd89430d945 100644
>>> --- a/drivers/phy/phy-sun4i-usb.c
>>> +++ b/drivers/phy/phy-sun4i-usb.c
>>> @@ -61,7 +61,6 @@
>>> #define MAX_PHYS 3
>>>
>>> struct sun4i_usb_phy_data {
>>> - struct clk *clk;
>>> void __iomem *base;
>>> struct mutex mutex;
>>> int num_phys;
>>> @@ -71,6 +70,7 @@ struct sun4i_usb_phy_data {
>>> void __iomem *pmu;
>>> struct regulator *vbus;
>>> struct reset_control *reset;
>>> + struct clk *clk;
>>> int index;
>>> } phys[MAX_PHYS];
>>> };
>>> @@ -146,13 +146,13 @@ static int sun4i_usb_phy_init(struct phy *_phy)
>>> struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
>>> int ret;
>>>
>>> - ret = clk_prepare_enable(data->clk);
>>> + ret = clk_prepare_enable(phy->clk);
>>> if (ret)
>>> return ret;
>>>
>>> ret = reset_control_deassert(phy->reset);
>>> if (ret) {
>>> - clk_disable_unprepare(data->clk);
>>> + clk_disable_unprepare(phy->clk);
>>> return ret;
>>> }
>>>
>>> @@ -170,11 +170,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
>>> static int sun4i_usb_phy_exit(struct phy *_phy)
>>> {
>>> struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
>>> - struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
>>>
>>> sun4i_usb_phy_passby(phy, 0);
>>> reset_control_assert(phy->reset);
>>> - clk_disable_unprepare(data->clk);
>>> + clk_disable_unprepare(phy->clk);
>>>
>>> return 0;
>>> }
>>> @@ -228,8 +227,10 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
>>> struct phy_provider *phy_provider;
>>> struct reset_control *reset;
>>> struct regulator *vbus;
>>> + bool dedicated_clocks;
>>
>> No default?
>>
>>> struct resource *res;
>>> struct phy *phy;
>>> + struct clk *clk;
>>> char name[16];
>>> int i;
>>>
>>> @@ -249,15 +250,20 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
>>> else
>>> data->disc_thresh = 2;
>>>
>>> + if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy"))
>>> + dedicated_clocks = true;
>>> +
>>
>> dedicated_clocks is more than likely to be true from leftover data
>> on the stack. This results in the usb phy driver probe failing, and
>> the usb host drivers left in perpetual probe deferral on my Cubietruck.
>>
>> Adding an else section fixes this.
>
> Good catch, fixed this in the sunxi-devel branch for now (until Maxime sends a new version).

so I wont be taking this patch in my tree. Anyway FWIW
Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>
> Regards,
>
> Hans
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/