Re: [linux-sunxi] [PATCH v2 3/7] phy: usb: sunxi: Introduce Allwinner A31 USB PHY support

From: Hans de Goede
Date: Mon May 12 2014 - 07:59:58 EST


Hi,

On 05/12/2014 11:14 AM, Chen-Yu Tsai wrote:
> Hi,
>
> On Sat, May 10, 2014 at 8:56 PM, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
>> The USB phy controller in the A31 differs mostly from the older controllers
>> because it has a clock dedicated for each phy, while the older ones were having
>> a single clock for all the phys.
>>
>> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
>> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
>> ---
>> drivers/phy/phy-sun4i-usb.c | 35 ++++++++++++++++++++++++++---------
>> 1 file changed, 26 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
>> index e6e6c4ba7145..8bd89430d945 100644
>> --- a/drivers/phy/phy-sun4i-usb.c
>> +++ b/drivers/phy/phy-sun4i-usb.c
>> @@ -61,7 +61,6 @@
>> #define MAX_PHYS 3
>>
>> struct sun4i_usb_phy_data {
>> - struct clk *clk;
>> void __iomem *base;
>> struct mutex mutex;
>> int num_phys;
>> @@ -71,6 +70,7 @@ struct sun4i_usb_phy_data {
>> void __iomem *pmu;
>> struct regulator *vbus;
>> struct reset_control *reset;
>> + struct clk *clk;
>> int index;
>> } phys[MAX_PHYS];
>> };
>> @@ -146,13 +146,13 @@ static int sun4i_usb_phy_init(struct phy *_phy)
>> struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
>> int ret;
>>
>> - ret = clk_prepare_enable(data->clk);
>> + ret = clk_prepare_enable(phy->clk);
>> if (ret)
>> return ret;
>>
>> ret = reset_control_deassert(phy->reset);
>> if (ret) {
>> - clk_disable_unprepare(data->clk);
>> + clk_disable_unprepare(phy->clk);
>> return ret;
>> }
>>
>> @@ -170,11 +170,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
>> static int sun4i_usb_phy_exit(struct phy *_phy)
>> {
>> struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
>> - struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
>>
>> sun4i_usb_phy_passby(phy, 0);
>> reset_control_assert(phy->reset);
>> - clk_disable_unprepare(data->clk);
>> + clk_disable_unprepare(phy->clk);
>>
>> return 0;
>> }
>> @@ -228,8 +227,10 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
>> struct phy_provider *phy_provider;
>> struct reset_control *reset;
>> struct regulator *vbus;
>> + bool dedicated_clocks;
>
> No default?
>
>> struct resource *res;
>> struct phy *phy;
>> + struct clk *clk;
>> char name[16];
>> int i;
>>
>> @@ -249,15 +250,20 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
>> else
>> data->disc_thresh = 2;
>>
>> + if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy"))
>> + dedicated_clocks = true;
>> +
>
> dedicated_clocks is more than likely to be true from leftover data
> on the stack. This results in the usb phy driver probe failing, and
> the usb host drivers left in perpetual probe deferral on my Cubietruck.
>
> Adding an else section fixes this.

Good catch, fixed this in the sunxi-devel branch for now (until Maxime sends a new version).

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/