Re: [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs

[Uwe Kleine-König]

Hello Daniel,

On Thu, Sep 26, 2013 at 10:52:29AM +0200, Daniel Lezcano wrote:
> On 09/26/2013 10:20 AM, Uwe Kleine-König wrote:
> >Hello Daniel,
> >
> >On Thu, Sep 26, 2013 at 01:49:52AM +0200, Daniel Lezcano wrote:
> >>On 09/25/2013 05:32 PM, Uwe Kleine-König wrote:
> >>>>>+static void __init efm32_timer_init(struct device_node *np)
> >>>>>+{
> >>>>>+	static int has_clocksource, has_clockevent;
> >>>>>+	int ret;
> >>>>>+
> >>>>>+	if (!has_clocksource) {
> >>>>>+		ret = efm32_clocksource_init(np);
> >>>>>+		if (!ret) {
> >>>>>+			has_clocksource = 1;
> >>>>>+			return;
> >>>>>+		}
> >>>>>+	}
> >>>>>+
> >>>>>+	if (!has_clockevent) {
> >>>>>+		ret = efm32_clockevent_init(np);
> >>>>>+		if (!ret) {
> >>>>>+			has_clockevent = 1;
> >>>>>+			return;
> >>>>>+		}
> >>>>>+	}
> >>>>>+}
> >>>>
> >>>>I don't get the purpose of this initialization, can you explain ?
> >>>An efm32 SoC has four timer blocks. A single block can only be used for
> >>>one of clocksource or clockevent device and having more than one
> >>>clocksource or clockevent device doesn't make sense. So this routine
> >>>asserts that the first timer is used as clocksource and the second as
> >>>clockevent device. The others are unused.
> >>
> >>Shouldn't be up to the dt to give the timers you want ?
> >The dt looks as follows:
> >
> >                 timer0: timer@40010000 {
> >                         compatible = "efm32,timer";
> >                         reg = <0x40010000 0x400>;
> >                         interrupts = <2>;
> >                         clocks = <&cmu clk_HFPERCLKTIMER0>;
> >                 };
> >
> >                 timer1: timer@40010400 {
> >                         compatible = "efm32,timer";
> >                         reg = <0x40010400 0x400>;
> >                         interrupts = <12>;
> >                         clocks = <&cmu clk_HFPERCLKTIMER1>;
> >                 };
> >
> >                 timer2: timer@40010800 {
> >                         compatible = "efm32,timer";
> >                         reg = <0x40010800 0x400>;
> >                         interrupts = <13>;
> >                         clocks = <&cmu clk_HFPERCLKTIMER2>;
> >                 };
> >
> >                 timer3: timer@40010c00 {
> >                         compatible = "efm32,timer";
> >                         reg = <0x40010c00 0x400>;
> >                         interrupts = <14>;
> >                         clocks = <&cmu clk_HFPERCLKTIMER3>;
> >                 };
> >
> >What is your suggestion now?
> >Add a property that specifies if the block
> >should be used as clocksource or clockevent_device? That isn't a
> >hardware description and so shouldn't go into the device tree.
> 
> At this point, I just asked a question and did not make any suggestion.
I thought your question implied knowing a better way. I'd be happy if it
did.
 
> >Provide two drivers that match on "efm32,timer", one for clocksource and
> >another for clockevent_device? That wouldn't work, too, as the first
> >driver to be loaded would grab all four timers and the second would get
> >none.
> 
> Thanks, now I understand the purpose of this routine, it is very
> similar than:
> 
> http://www.spinics.net/lists/arm-kernel/msg273984.html
> 
> right ?
Right. And as tglx points out in that post, it's not pretty, but I don't
have an idea how to do it nicer. (BTW, I wonder if the of_node_put in
that snipplet is correct, also the three static functions being called
could be marked __init.) At least my implementation is a bit more robust
as it handles the case that the timer intended to be used as clockevent
device doesn't have an irq while the dw_apb_timer driver simply BUGs
then.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/