Re: [git pull] PCI fixes
From: Yinghai Lu
Date: Wed Dec 07 2011 - 14:20:44 EST
On Wed, Dec 7, 2011 at 12:18 AM, Kenji Kaneshige
<kaneshige.kenji@xxxxxxxxxxxxxx> wrote:
> + /* Configuration request Retry Status */
> + if (l == 0xffff0001)
> + goto wait;
>
> I think this works only when CRS Software Visibility is enabled,
> isn't it? Currently there is no code to enable CRS Software
> Visibility. And there can be root ports that doesn't support CRS
> Software Visibility. We need consideration about this.
I copied and change from pci_scan_device...
/*
* Read the config data for a PCI device, sanity-check it
* and fill in the dev structure...
*/
static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
{
struct pci_dev *dev;
u32 l;
int delay = 1;
if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
return NULL;
/* some broken boards return 0 or ~0 if a slot is empty: */
if (l == 0xffffffff || l == 0x00000000 ||
l == 0x0000ffff || l == 0xffff0000)
return NULL;
/* Configuration request Retry Status */
while (l == 0xffff0001) {
msleep(delay);
delay *= 2;
if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
return NULL;
/* Card hasn't responded in 60 seconds? Must be stuck. */
if (delay > 60 * 1000) {
printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not "
"responding\n", pci_domain_nr(bus),
bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn));
return NULL;
}
}
so CRS code is not removed cleanly?
>
> + mdelay(100);
> + delay -= 100;
> + if (delay > 0)
> + goto again;
>
> We must use msleep() instead of mdelay().
yes.
Thanks
Yinghai Lu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/