Re: [regression] Re: [PATCH 3/7] mfd: twl4030-irq: drop the kthread

[Felipe Contreras]

On Wed, Dec 7, 2011 at 3:59 PM, Jarkko Nikula <jarkko.nikula@xxxxxxxxxx> wrote:
> On 12/07/2011 03:39 PM, Felipe Balbi wrote:
>>>
>>> I'll try to flash a system to NAND, since I can't seem to just get the
>>> MMC to work when the cover is open and the device is connected to the
>>> jig to see if I can see something from serial console.
>>>
>>> You don't have any idea about what to try?
>>
>>
>> you could cut the back cover so that it just fits the device on the jig
>> (I did that to an old cover), then it works just fine :-)
>>
> You could also go without breaking the back cover by putting a magnet on top
> the hal sensor (like tape a piece from a fridge magnet). See here the place:
>
> http://talk.maemo.org/showthread.php?p=1008775
>
> Another option is to to set .gpio_cd = -EINVAL for external mmc in
> arch/arm/mach-omap2/board-rx51-peripherals.c.

Nice. That gpio_cd trick did it :)

-- 
Felipe Contreras
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/