Re: [regression] Re: [PATCH 3/7] mfd: twl4030-irq: drop the kthread

[Jarkko Nikula]

On 12/07/2011 03:39 PM, Felipe Balbi wrote:
> > I'll try to flash a system to NAND, since I can't seem to just get the
> > MMC to work when the cover is open and the device is connected to the
> > jig to see if I can see something from serial console.
> >
> > You don't have any idea about what to try?
>
> you could cut the back cover so that it just fits the device on the jig
> (I did that to an old cover), then it works just fine :-)
You could also go without breaking the back cover by putting a magnet on 
top the hal sensor (like tape a piece from a fridge magnet). See here 
the place:

http://talk.maemo.org/showthread.php?p=1008775

Another option is to to set .gpio_cd = -EINVAL for external mmc in 
arch/arm/mach-omap2/board-rx51-peripherals.c.

--
Jarkko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/