Re: [RFC PATCH] block: Fix bio merge induced high I/O latency

[Jens Axboe]

On Sun, Jan 18 2009, Mathieu Desnoyers wrote:
> I looked at the "ls" behavior (while doing a dd) within my LTTng trace
> to create a fio job file.  The said behavior is appended below as "Part
> 1 - ls I/O behavior". Note that the original "ls" test case was done
> with the anticipatory I/O scheduler, which was active by default on my
> debian system with custom vanilla 2.6.28 kernel. Also note that I am
> running this on a raid-1, but have experienced the same problem on a
> standard partition I created on the same machine.
> 
> I created the fio job file appended as "Part 2 - dd+ls fio job file". It
> consists of one dd-like job and many small jobs reading as many data as
> ls did. I used the small test script to batch run this ("Part 3 - batch
> test").
> 
> The results for the ls-like jobs are interesting :
> 
> I/O scheduler        runt-min (msec)   runt-max (msec)
> noop                       41             10563
> anticipatory               63              8185
> deadline                   52             33387
> cfq                        43              1420

Do you have queuing enabled on your drives? You can check that in
/sys/block/sdX/device/queue_depth. Try setting those to 1 and retest all
schedulers, would be good for comparison.

raid personalities or dm complicates matters, since it introduces a
disconnect between 'ls' and the io scheduler at the bottom...

> > As a quick test, could you try and increase the slice_idle to eg 20ms?
> > Sometimes I've seen timing being slightly off, which makes us miss the
> > sync window for the ls (in your case) process. Then you get a mix of
> > async and sync IO all the time, which very much slows down the sync
> > process.
> > 
> 
> Just to confirm, the quick test you are taking about would be :
> 
> ---
>  block/cfq-iosched.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> Index: linux-2.6-lttng/block/cfq-iosched.c
> ===================================================================
> --- linux-2.6-lttng.orig/block/cfq-iosched.c	2009-01-18 15:17:32.000000000 -0500
> +++ linux-2.6-lttng/block/cfq-iosched.c	2009-01-18 15:46:38.000000000 -0500
> @@ -26,7 +26,7 @@ static const int cfq_back_penalty = 2;
>  static const int cfq_slice_sync = HZ / 10;
>  static int cfq_slice_async = HZ / 25;
>  static const int cfq_slice_async_rq = 2;
> -static int cfq_slice_idle = HZ / 125;
> +static int cfq_slice_idle = 20;
>  
>  /*
>   * offset from end of service tree
> 
> 
> It does not make much difference with the standard cfq test :
> 
> I/O scheduler        runt-min (msec)   runt-max (msec)
> cfq (standard)             43              1420
> cfq (20ms slice_idle)      31              1573

OK, that's good at least!

> So, I guess 1.5s delay to run ls on a directory when the cache is cold
> with a cfq I/O scheduler is somewhat acceptable, but I doubt the 8, 10
> and 33s response times for the anticipatory, noop and deadline I/O
> schedulers are. I wonder why on earth is the anticipatory I/O scheduler
> activated by default with my kernel given it results in so poor
> interactive behavior when doing large I/O ?

I see you already found out why :-)

-- 
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/