[PATCH 2/2] [POWERPC] 8xx: fix whitespace and indentation
From: Vitaly Bordug
Date: Sat May 05 2007 - 21:28:14 EST
Rolling forward PCMCIA driver, it was discovered that the indentation
in existing one is very odd. This patch is just result of Lindent run ontop
of culprit files.
Signed-off-by: Vitaly Bordug <vitb@xxxxxxxxxxxxxxxxxxx>
---
drivers/pcmcia/m8xx_pcmcia.c | 548 +++++++++++++++++++++---------------------
1 files changed, 278 insertions(+), 270 deletions(-)
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 40f6e20..79e14ab 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -113,7 +113,7 @@ MODULE_LICENSE("Dual MPL/GPL");
#define CONFIG_PCMCIA_SLOT_B
#endif
-#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
+#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B)
@@ -146,9 +146,9 @@ MODULE_LICENSE("Dual MPL/GPL");
/* ------------------------------------------------------------------------- */
-#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */
-#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */
-#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */
+#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */
+#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */
+#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */
/* ------------------------------------------------------------------------- */
static int pcmcia_schlvl;
@@ -169,8 +169,8 @@ static u32 *m8xx_pgcrx[2];
*/
struct pcmcia_win {
- u32 br;
- u32 or;
+ u32 br;
+ u32 or;
};
/*
@@ -214,7 +214,7 @@ struct pcmcia_win {
/* we keep one lookup table per socket to check flags */
-#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */
+#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */
struct event_table {
u32 regbit;
@@ -224,8 +224,8 @@ struct event_table {
static const char driver_name[] = "m8xx-pcmcia";
struct socket_info {
- void (*handler)(void *info, u32 events);
- void *info;
+ void (*handler) (void *info, u32 events);
+ void *info;
u32 slot;
pcmconf8xx_t *pcmcia;
@@ -234,7 +234,7 @@ struct socket_info {
socket_state_t state;
struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO];
- struct pccard_io_map io_win[PCMCIA_IO_WIN_NO];
+ struct pccard_io_map io_win[PCMCIA_IO_WIN_NO];
struct event_table events[PCMCIA_EVENTS_MAX];
struct pcmcia_socket socket;
};
@@ -248,8 +248,7 @@ static struct socket_info socket[PCMCIA_SOCKETS_NO];
#define M8XX_SIZES_NO 32
-static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] =
-{
+static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = {
0x00000001, 0x00000002, 0x00000008, 0x00000004,
0x00000080, 0x00000040, 0x00000010, 0x00000020,
0x00008000, 0x00004000, 0x00001000, 0x00002000,
@@ -265,7 +264,7 @@ static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] =
static irqreturn_t m8xx_interrupt(int irq, void *dev);
-#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
+#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
/* ------------------------------------------------------------------------- */
/* board specific stuff: */
@@ -289,8 +288,9 @@ static int voltage_set(int slot, int vcc, int vpp)
{
u32 reg = 0;
- switch(vcc) {
- case 0: break;
+ switch (vcc) {
+ case 0:
+ break;
case 33:
reg |= BCSR1_PCVCTL4;
break;
@@ -301,11 +301,12 @@ static int voltage_set(int slot, int vcc, int vpp)
return 1;
}
- switch(vpp) {
- case 0: break;
+ switch (vpp) {
+ case 0:
+ break;
case 33:
case 50:
- if(vcc == vpp)
+ if (vcc == vpp)
reg |= BCSR1_PCVCTL6;
else
return 1;
@@ -316,25 +317,29 @@ static int voltage_set(int slot, int vcc, int vpp)
return 1;
}
- if(!((vcc == 50) || (vcc == 0)))
+ if (!((vcc == 50) || (vcc == 0)))
return 1;
/* first, turn off all power */
- out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5 | BCSR1_PCVCTL6 | BCSR1_PCVCTL7));
+ out_be32(((u32 *) RPX_CSR_ADDR),
+ in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 |
+ BCSR1_PCVCTL5 |
+ BCSR1_PCVCTL6 |
+ BCSR1_PCVCTL7));
/* enable new powersettings */
- out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) | reg);
+ out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg);
return 0;
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
+#define hardware_enable(_slot_) /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
-#endif /* CONFIG_RPXCLASSIC */
+#endif /* CONFIG_RPXCLASSIC */
/* FADS Boards from Motorola */
@@ -346,43 +351,45 @@ static int voltage_set(int slot, int vcc, int vpp)
{
u32 reg = 0;
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCCVCC0;
- break;
- case 50:
- reg |= BCSR1_PCCVCC1;
- break;
- default:
- return 1;
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= BCSR1_PCCVCC0;
+ break;
+ case 50:
+ reg |= BCSR1_PCCVCC1;
+ break;
+ default:
+ return 1;
}
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= BCSR1_PCCVPP1;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= BCSR1_PCCVPP0;
- else
- return 1;
- default:
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= BCSR1_PCCVPP1;
+ else
return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= BCSR1_PCCVPP0;
+ else
+ return 1;
+ default:
+ return 1;
}
/* first, turn off all power */
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) & ~(BCSR1_PCCVCC_MASK | BCSR1_PCCVPP_MASK));
+ out_be32((u32 *) BCSR1,
+ in_be32((u32 *) BCSR1) & ~(BCSR1_PCCVCC_MASK |
+ BCSR1_PCCVPP_MASK));
/* enable new powersettings */
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) | reg);
+ out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | reg);
return 0;
}
@@ -391,12 +398,12 @@ static int voltage_set(int slot, int vcc, int vpp)
static void hardware_enable(int slot)
{
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) & ~BCSR1_PCCEN);
+ out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) & ~BCSR1_PCCEN);
}
static void hardware_disable(int slot)
{
- out_be32((u32 *)BCSR1, in_be32((u32 *)BCSR1) | BCSR1_PCCEN);
+ out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | BCSR1_PCCEN);
}
#endif
@@ -410,7 +417,7 @@ static void hardware_disable(int slot)
static inline void hardware_enable(int slot)
{
- m8xx_pcmcia_ops.hw_ctrl(slot, 1);
+ m8xx_pcmcia_ops.hw_ctrl(slot, 1);
}
static inline void hardware_disable(int slot)
@@ -436,52 +443,53 @@ static int voltage_set(int slot, int vcc, int vpp)
{
u8 reg = 0;
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= CSR2_VCC_33;
- break;
- case 50:
- reg |= CSR2_VCC_50;
- break;
- default:
- return 1;
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= CSR2_VCC_33;
+ break;
+ case 50:
+ reg |= CSR2_VCC_50;
+ break;
+ default:
+ return 1;
}
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= CSR2_VPP_VCC;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= CSR2_VPP_12;
- else
- return 1;
- default:
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= CSR2_VPP_VCC;
+ else
+ return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= CSR2_VPP_12;
+ else
return 1;
+ default:
+ return 1;
}
/* first, turn off all power */
- out_8((u8 *)MBX_CSR2_ADDR, in_8((u8 *)MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK));
+ out_8((u8 *) MBX_CSR2_ADDR,
+ in_8((u8 *) MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK));
/* enable new powersettings */
- out_8((u8 *)MBX_CSR2_ADDR, in_8((u8 *)MBX_CSR2_ADDR) | reg);
+ out_8((u8 *) MBX_CSR2_ADDR, in_8((u8 *) MBX_CSR2_ADDR) | reg);
return 0;
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
+#define hardware_enable(_slot_) /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
-#endif /* CONFIG_MBX */
+#endif /* CONFIG_MBX */
#if defined(CONFIG_PRxK)
#include <asm/cpld.h>
@@ -495,43 +503,46 @@ static int voltage_set(int slot, int vcc, int vpp)
u8 regread;
cpld_regs *ccpld = get_cpld();
- switch(vcc) {
- case 0:
- break;
- case 33:
- reg |= PCMCIA_VCC_33;
- break;
- case 50:
- reg |= PCMCIA_VCC_50;
- break;
- default:
- return 1;
+ switch (vcc) {
+ case 0:
+ break;
+ case 33:
+ reg |= PCMCIA_VCC_33;
+ break;
+ case 50:
+ reg |= PCMCIA_VCC_50;
+ break;
+ default:
+ return 1;
}
- switch(vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if(vcc == vpp)
- reg |= PCMCIA_VPP_VCC;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= PCMCIA_VPP_12;
- else
- return 1;
- default:
+ switch (vpp) {
+ case 0:
+ break;
+ case 33:
+ case 50:
+ if (vcc == vpp)
+ reg |= PCMCIA_VPP_VCC;
+ else
return 1;
+ break;
+ case 120:
+ if ((vcc == 33) || (vcc == 50))
+ reg |= PCMCIA_VPP_12;
+ else
+ return 1;
+ default:
+ return 1;
}
reg = reg >> (slot << 2);
regread = in_8(&ccpld->fpga_pc_ctl);
- if (reg != (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
+ if (reg !=
+ (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
/* enable new powersettings */
- regread = regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2));
+ regread =
+ regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >>
+ (slot << 2));
out_8(&ccpld->fpga_pc_ctl, reg | regread);
msleep(100);
}
@@ -540,10 +551,10 @@ static int voltage_set(int slot, int vcc, int vpp)
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
+#define hardware_enable(_slot_) /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
-#endif /* CONFIG_PRxK */
+#endif /* CONFIG_PRxK */
static u32 pending_events[PCMCIA_SOCKETS_NO];
static DEFINE_SPINLOCK(pending_event_lock);
@@ -553,7 +564,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
struct socket_info *s;
struct event_table *e;
unsigned int i, events, pscr, pipr, per;
- pcmconf8xx_t *pcmcia = socket[0].pcmcia;
+ pcmconf8xx_t *pcmcia = socket[0].pcmcia;
dprintk("Interrupt!\n");
/* get interrupt sources */
@@ -562,16 +573,16 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
pipr = in_be32(&pcmcia->pcmc_pipr);
per = in_be32(&pcmcia->pcmc_per);
- for(i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
s = &socket[i];
e = &s->events[0];
events = 0;
- while(e->regbit) {
- if(pscr & e->regbit)
+ while (e->regbit) {
+ if (pscr & e->regbit)
events |= e->eventbit;
- e++;
+ e++;
}
/*
@@ -579,13 +590,11 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
* not too nice done,
* we depend on that CD2 is the bit to the left of CD1...
*/
- if(events & SS_DETECT)
- if(((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^
- (pipr & M8XX_PCMCIA_CD1(i)))
- {
+ if (events & SS_DETECT)
+ if (((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^
+ (pipr & M8XX_PCMCIA_CD1(i))) {
events &= ~SS_DETECT;
}
-
#ifdef PCMCIA_GLITCHY_CD
/*
* I've experienced CD problems with my ADS board.
@@ -593,24 +602,23 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
* real change of Card detection.
*/
- if((events & SS_DETECT) &&
- ((pipr &
- (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) &&
- (s->state.Vcc | s->state.Vpp)) {
+ if ((events & SS_DETECT) &&
+ ((pipr &
+ (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) &&
+ (s->state.Vcc | s->state.Vpp)) {
events &= ~SS_DETECT;
/*printk( "CD glitch workaround - CD = 0x%08x!\n",
- (pipr & (M8XX_PCMCIA_CD2(i)
- | M8XX_PCMCIA_CD1(i))));*/
+ (pipr & (M8XX_PCMCIA_CD2(i)
+ | M8XX_PCMCIA_CD1(i)))); */
}
#endif
/* call the handler */
dprintk("slot %u: events = 0x%02x, pscr = 0x%08x, "
- "pipr = 0x%08x\n",
- i, events, pscr, pipr);
+ "pipr = 0x%08x\n", i, events, pscr, pipr);
- if(events) {
+ if (events) {
spin_lock(&pending_event_lock);
pending_events[i] |= events;
spin_unlock(&pending_event_lock);
@@ -643,11 +651,11 @@ static u32 m8xx_get_graycode(u32 size)
{
u32 k;
- for(k = 0; k < M8XX_SIZES_NO; k++)
- if(m8xx_size_to_gray[k] == size)
+ for (k = 0; k < M8XX_SIZES_NO; k++)
+ if (m8xx_size_to_gray[k] == size)
break;
- if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
+ if ((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
k = -1;
return k;
@@ -657,7 +665,7 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
{
u32 reg, clocks, psst, psl, psht;
- if(!ns) {
+ if (!ns) {
/*
* We get called with IO maps setup to 0ns
@@ -665,10 +673,10 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
* They should be 255ns.
*/
- if(is_io)
+ if (is_io)
ns = 255;
else
- ns = 100; /* fast memory if 0 */
+ ns = 100; /* fast memory if 0 */
}
/*
@@ -679,23 +687,23 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
/* how we want to adjust the timing - in percent */
-#define ADJ 180 /* 80 % longer accesstime - to be sure */
+#define ADJ 180 /* 80 % longer accesstime - to be sure */
clocks = ((bus_freq / 1000) * ns) / 1000;
- clocks = (clocks * ADJ) / (100*1000);
- if(clocks >= PCMCIA_BMT_LIMIT) {
- printk( "Max access time limit reached\n");
- clocks = PCMCIA_BMT_LIMIT-1;
+ clocks = (clocks * ADJ) / (100 * 1000);
+ if (clocks >= PCMCIA_BMT_LIMIT) {
+ printk("Max access time limit reached\n");
+ clocks = PCMCIA_BMT_LIMIT - 1;
}
- psst = clocks / 7; /* setup time */
- psht = clocks / 7; /* hold time */
- psl = (clocks * 5) / 7; /* strobe length */
+ psst = clocks / 7; /* setup time */
+ psht = clocks / 7; /* hold time */
+ psl = (clocks * 5) / 7; /* strobe length */
psst += clocks - (psst + psht + psl);
- reg = psst << 12;
- reg |= psl << 7;
+ reg = psst << 12;
+ reg |= psl << 7;
reg |= psht << 16;
return reg;
@@ -710,8 +718,8 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
pipr = in_be32(&pcmcia->pcmc_pipr);
- *value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
- | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
+ *value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
+ | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
*value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0;
if (s->state.flags & SS_IOCARD)
@@ -795,16 +803,16 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
/* read out VS1 and VS2 */
reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock))
- >> M8XX_PCMCIA_VS_SHIFT(lsock);
+ >> M8XX_PCMCIA_VS_SHIFT(lsock);
- if(socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) {
- switch(reg) {
+ if (socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) {
+ switch (reg) {
case 1:
*value |= SS_3VCARD;
- break; /* GND, NC - 3.3V only */
+ break; /* GND, NC - 3.3V only */
case 2:
*value |= SS_XVCARD;
- break; /* NC. GND - x.xV only */
+ break; /* NC. GND - x.xV only */
};
}
@@ -812,7 +820,7 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
return 0;
}
-static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
+static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state)
{
int lsock = container_of(sock, struct socket_info, socket)->slot;
struct socket_info *s = &socket[lsock];
@@ -821,20 +829,20 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
unsigned long flags;
pcmconf8xx_t *pcmcia = socket[0].pcmcia;
- dprintk( "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
- "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
- state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
+ dprintk("SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
+ "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
+ state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
/* First, set voltage - bail out if invalid */
- if(voltage_set(lsock, state->Vcc, state->Vpp))
+ if (voltage_set(lsock, state->Vcc, state->Vpp))
return -EINVAL;
-
/* Take care of reset... */
- if(state->flags & SS_RESET)
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */
+ if (state->flags & SS_RESET)
+ out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */
else
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET);
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET);
/* ... and output enable. */
@@ -846,10 +854,11 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
no pullups are present -> the cards act wierd.
So right now the buffers are enabled if the power is on. */
- if(state->Vcc || state->Vpp)
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */
+ if (state->Vcc || state->Vpp)
+ out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */
else
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE);
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE);
/*
* We'd better turn off interrupts before
@@ -866,17 +875,17 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
e = &s->events[0];
reg = 0;
- if(state->csc_mask & SS_DETECT) {
+ if (state->csc_mask & SS_DETECT) {
e->eventbit = SS_DETECT;
reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock)
| M8XX_PCMCIA_CD1(lsock));
e++;
}
- if(state->flags & SS_IOCARD) {
+ if (state->flags & SS_IOCARD) {
/*
* I/O card
*/
- if(state->csc_mask & SS_STSCHG) {
+ if (state->csc_mask & SS_STSCHG) {
e->eventbit = SS_STSCHG;
reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
e++;
@@ -884,9 +893,10 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
/*
* If io_irq is non-zero we should enable irq.
*/
- if(state->io_irq) {
+ if (state->io_irq) {
out_be32(M8XX_PGCRX(lsock),
- in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(s->hwirq) << 24);
+ in_be32(M8XX_PGCRX(lsock)) |
+ mk_int_int_mask(s->hwirq) << 24);
/*
* Strange thing here:
* The manual does not tell us which interrupt
@@ -897,33 +907,32 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* have to be cleared in PSCR in the interrupt handler.
*/
reg |= M8XX_PCMCIA_RDY_L(lsock);
- }
- else
- out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff);
- }
- else {
+ } else
+ out_be32(M8XX_PGCRX(lsock),
+ in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff);
+ } else {
/*
* Memory card
*/
- if(state->csc_mask & SS_BATDEAD) {
+ if (state->csc_mask & SS_BATDEAD) {
e->eventbit = SS_BATDEAD;
reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
e++;
}
- if(state->csc_mask & SS_BATWARN) {
+ if (state->csc_mask & SS_BATWARN) {
e->eventbit = SS_BATWARN;
reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock);
e++;
}
/* What should I trigger on - low/high,raise,fall? */
- if(state->csc_mask & SS_READY) {
+ if (state->csc_mask & SS_READY) {
e->eventbit = SS_READY;
- reg |= e->regbit = 0; //??
+ reg |= e->regbit = 0; //??
e++;
}
}
- e->regbit = 0; /* terminate list */
+ e->regbit = 0; /* terminate list */
/*
* Clear the status changed .
@@ -940,7 +949,9 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
* Ones will enable the interrupt.
*/
- reg |= in_be32(&pcmcia->pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
+ reg |=
+ in_be32(&pcmcia->
+ pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
out_be32(&pcmcia->pcmc_per, reg);
spin_unlock_irqrestore(&events_lock, flags);
@@ -961,67 +972,66 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
unsigned int reg, winnr;
pcmconf8xx_t *pcmcia = s->pcmcia;
-
#define M8XX_SIZE (io->stop - io->start + 1)
#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
- dprintk( "SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, "
+ "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
+ io->speed, io->start, io->stop);
if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
|| (io->stop > 0xffff) || (io->stop < io->start))
return -EINVAL;
- if((reg = m8xx_get_graycode(M8XX_SIZE)) == -1)
+ if ((reg = m8xx_get_graycode(M8XX_SIZE)) == -1)
return -EINVAL;
- if(io->flags & MAP_ACTIVE) {
+ if (io->flags & MAP_ACTIVE) {
- dprintk( "io->flags & MAP_ACTIVE\n");
+ dprintk("io->flags & MAP_ACTIVE\n");
winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
- + (lsock * PCMCIA_IO_WIN_NO) + io->map;
+ + (lsock * PCMCIA_IO_WIN_NO) + io->map;
/* setup registers */
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
w += winnr;
- out_be32(&w->or, 0); /* turn off window first */
+ out_be32(&w->or, 0); /* turn off window first */
out_be32(&w->br, M8XX_BASE);
reg <<= 27;
- reg |= M8XX_PCMCIA_POR_IO |(lsock << 2);
+ reg |= M8XX_PCMCIA_POR_IO | (lsock << 2);
reg |= m8xx_get_speed(io->speed, 1, s->bus_freq);
- if(io->flags & MAP_WRPROT)
+ if (io->flags & MAP_WRPROT)
reg |= M8XX_PCMCIA_POR_WRPROT;
- /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ))*/
- if(io->flags & MAP_16BIT)
+ /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ)) */
+ if (io->flags & MAP_16BIT)
reg |= M8XX_PCMCIA_POR_16BIT;
- if(io->flags & MAP_ACTIVE)
+ if (io->flags & MAP_ACTIVE)
reg |= M8XX_PCMCIA_POR_VALID;
out_be32(&w->or, reg);
dprintk("Socket %u: Mapped io window %u at %#8.8x, "
- "OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
+ "OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
} else {
/* shutdown IO window */
winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
- + (lsock * PCMCIA_IO_WIN_NO) + io->map;
+ + (lsock * PCMCIA_IO_WIN_NO) + io->map;
/* setup registers */
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
w += winnr;
- out_be32(&w->or, 0); /* turn off window */
- out_be32(&w->br, 0); /* turn off base address */
+ out_be32(&w->or, 0); /* turn off window */
+ out_be32(&w->br, 0); /* turn off base address */
dprintk("Socket %u: Unmapped io window %u at %#8.8x, "
"OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
@@ -1029,15 +1039,14 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
/* copy the struct and modify the copy */
s->io_win[io->map] = *io;
- s->io_win[io->map].flags &= (MAP_WRPROT
- | MAP_16BIT
- | MAP_ACTIVE);
+ s->io_win[io->map].flags &= (MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
dprintk("SetIOMap exit\n");
return 0;
}
-static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *mem)
+static int m8xx_set_mem_map(struct pcmcia_socket *sock,
+ struct pccard_mem_map *mem)
{
int lsock = container_of(sock, struct socket_info, socket)->slot;
struct socket_info *s = &socket[lsock];
@@ -1046,19 +1055,19 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
unsigned int reg, winnr;
pcmconf8xx_t *pcmcia = s->pcmcia;
- dprintk( "SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
+ "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, mem->static_start, mem->card_start);
if ((mem->map >= PCMCIA_MEM_WIN_NO)
-// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
+// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
|| (mem->card_start >= 0x04000000)
- || (mem->static_start & 0xfff) /* 4KByte resolution */
- || (mem->card_start & 0xfff))
+ || (mem->static_start & 0xfff) /* 4KByte resolution */
+ ||(mem->card_start & 0xfff))
return -EINVAL;
- if((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) {
- printk( "Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE);
+ if ((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) {
+ printk("Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE);
return -EINVAL;
}
reg <<= 27;
@@ -1067,50 +1076,47 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
/* Setup the window in the pcmcia controller */
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
w += winnr;
reg |= lsock << 2;
reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq);
- if(mem->flags & MAP_ATTRIB)
- reg |= M8XX_PCMCIA_POR_ATTRMEM;
+ if (mem->flags & MAP_ATTRIB)
+ reg |= M8XX_PCMCIA_POR_ATTRMEM;
- if(mem->flags & MAP_WRPROT)
+ if (mem->flags & MAP_WRPROT)
reg |= M8XX_PCMCIA_POR_WRPROT;
- if(mem->flags & MAP_16BIT)
+ if (mem->flags & MAP_16BIT)
reg |= M8XX_PCMCIA_POR_16BIT;
- if(mem->flags & MAP_ACTIVE)
+ if (mem->flags & MAP_ACTIVE)
reg |= M8XX_PCMCIA_POR_VALID;
out_be32(&w->or, reg);
dprintk("Socket %u: Mapped memory window %u at %#8.8x, "
- "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
+ "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
- if(mem->flags & MAP_ACTIVE) {
+ if (mem->flags & MAP_ACTIVE) {
/* get the new base address */
mem->static_start = PCMCIA_MEM_WIN_BASE +
- (PCMCIA_MEM_WIN_SIZE * winnr)
- + mem->card_start;
+ (PCMCIA_MEM_WIN_SIZE * winnr)
+ + mem->card_start;
}
dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, mem->static_start, mem->card_start);
/* copy the struct and modify the copy */
old = &s->mem_win[mem->map];
*old = *mem;
- old->flags &= (MAP_ATTRIB
- | MAP_WRPROT
- | MAP_16BIT
- | MAP_ACTIVE);
+ old->flags &= (MAP_ATTRIB | MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
return 0;
}
@@ -1121,7 +1127,7 @@ static int m8xx_sock_init(struct pcmcia_socket *sock)
pccard_io_map io = { 0, 0, 0, 0, 1 };
pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 };
- dprintk( "sock_init(%d)\n", s);
+ dprintk("sock_init(%d)\n", s);
m8xx_set_socket(sock, &dead_socket);
for (i = 0; i < PCMCIA_IO_WIN_NO; i++) {
@@ -1143,7 +1149,7 @@ static int m8xx_sock_suspend(struct pcmcia_socket *sock)
}
static struct pccard_operations m8xx_services = {
- .init = m8xx_sock_init,
+ .init = m8xx_sock_init,
.suspend = m8xx_sock_suspend,
.get_status = m8xx_get_status,
.set_socket = m8xx_set_socket,
@@ -1151,7 +1157,8 @@ static struct pccard_operations m8xx_services = {
.set_mem_map = m8xx_set_mem_map,
};
-static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id *match)
+static int __init m8xx_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
{
struct pcmcia_win *w;
unsigned int i, m, hwirq;
@@ -1162,49 +1169,50 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
pcmcia_info("%s\n", version);
pcmcia = of_iomap(np, 0);
- if(pcmcia == NULL)
+ if (pcmcia == NULL)
return -EINVAL;
pcmcia_schlvl = irq_of_parse_and_map(np, 0);
- hwirq = irq_map[pcmcia_schlvl].hwirq;
+ hwirq = irq_map[pcmcia_schlvl].hwirq;
if (pcmcia_schlvl < 0)
return -EINVAL;
m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra;
m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb;
-
pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG
" with IRQ %u (%d). \n", pcmcia_schlvl, hwirq);
/* Configure Status change interrupt */
- if(request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
- driver_name, socket)) {
+ if (request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
+ driver_name, socket)) {
pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n",
pcmcia_schlvl);
return -1;
}
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
- out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+ out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
/* connect interrupt and disable CxOE */
- out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
- out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
+ out_be32(M8XX_PGCRX(0),
+ M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
+ out_be32(M8XX_PGCRX(1),
+ M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
/* intialize the fixed memory windows */
- for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
out_be32(&w->br, PCMCIA_MEM_WIN_BASE +
- (PCMCIA_MEM_WIN_SIZE
- * (m + i * PCMCIA_MEM_WIN_NO)));
+ (PCMCIA_MEM_WIN_SIZE
+ * (m + i * PCMCIA_MEM_WIN_NO)));
- out_be32(&w->or, 0); /* set to not valid */
+ out_be32(&w->or, 0); /* set to not valid */
w++;
}
@@ -1218,10 +1226,11 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
hardware_enable(0);
hardware_enable(1);
- for (i = 0 ; i < PCMCIA_SOCKETS_NO; i++) {
+ for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
socket[i].slot = i;
socket[i].socket.owner = THIS_MODULE;
- socket[i].socket.features = SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP;
+ socket[i].socket.features =
+ SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP;
socket[i].socket.irq_mask = 0x000;
socket[i].socket.map_size = 0x1000;
socket[i].socket.io_offset = 0;
@@ -1234,7 +1243,6 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
socket[i].bus_freq = ppc_proc_freq;
socket[i].hwirq = hwirq;
-
}
for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
@@ -1246,25 +1254,25 @@ static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id
return 0;
}
-static int m8xx_remove(struct of_device* ofdev)
+static int m8xx_remove(struct of_device *ofdev)
{
u32 m, i;
struct pcmcia_win *w;
pcmconf8xx_t *pcmcia = socket[0].pcmcia;
for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
- w = (void *) &pcmcia->pcmc_pbr0;
+ w = (void *)&pcmcia->pcmc_pbr0;
out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i));
out_be32(&pcmcia->pcmc_per,
- in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
+ in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
/* turn off interrupt and disable CxOE */
out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
/* turn off memory windows */
for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
- out_be32(&w->or, 0); /* set to not valid */
+ out_be32(&w->or, 0); /* set to not valid */
w++;
}
@@ -1299,21 +1307,21 @@ static int m8xx_resume(struct platform_device *pdev)
static struct of_device_id m8xx_pcmcia_match[] = {
{
- .type = "pcmcia",
- .compatible = "fsl,pq-pcmcia",
- },
+ .type = "pcmcia",
+ .compatible = "fsl,pq-pcmcia",
+ },
{},
};
MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match);
static struct of_platform_driver m8xx_pcmcia_driver = {
- .name = (char *) driver_name,
- .match_table = m8xx_pcmcia_match,
- .probe = m8xx_probe,
- .remove = m8xx_remove,
- .suspend = m8xx_suspend,
- .resume = m8xx_resume,
+ .name = (char *)driver_name,
+ .match_table = m8xx_pcmcia_match,
+ .probe = m8xx_probe,
+ .remove = m8xx_remove,
+ .suspend = m8xx_suspend,
+ .resume = m8xx_resume,
};
static int __init m8xx_init(void)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/