Re: High CPU usage with sata_nv

From: Matthew Fredrickson
Date: Wed Feb 21 2007 - 10:28:46 EST

On Feb 20, 2007, at 9:43 PM, Robert Hancock wrote:

Matthew Fredrickson wrote:
I have noticed something that might be related as well. I am working on a device driver that would have periodic data errors due to exceptionally long interrupt handling latency. I have come to the point that I suspect that it's the sata_nv driver, and now that we can't do the hdparm -u1 option for sata, it seems to be a bigger problem.

What kernel are you using? There were some complaints about latency problems (the ATA status register read taking a ridiculous amount of time to complete) on sata_nv previously, but 2.6.20 should eliminate that problem at least on nForce4 chipsets..

It's a 2.6.18 kernel. What we're seeing (by means of the interrupt pin on another card) is extremely large interrupt latency (measured from the time the interrupt pin goes low to the first couple lines of code in the IRQ handler to clear it) occasionally, in the order of 500-700 microseconds. I figured it was some other driver on the system disabling irqs for a long period of time, but it's difficult to trace what might be doing that.

Matthew Fredrickson

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at
Please read the FAQ at