Re: PCI riser cards and PCI irq routing, etc

From: Udo van den Heuvel
Date: Mon Feb 19 2007 - 23:17:28 EST

Krzysztof Halasa wrote:
> Udo van den Heuvel <udovdh@xxxxxxxxx> writes:
>> At the bottom I added a dmesg output of the kernel after boot.
>> I more or less know that irq 20 for the DVB-S card (saa7146 (1)) is
>> 'working'. I know that irq 16 for saa7146 (0) (DVB-T) is not working for
>> i2c although the card does work perfectly for DVB-T reception (picture,
>> low CPU load, etc) with only reception as the bottleneck.
> BTW: Can you check which device # and IRQ does the card get if plugged
> directly into the PCI slot on board (without the riser)?

DN is 20 I believe (from the tranquilPC doc).
irq I'd have to check.

> Is it a VIA ITX board? I think I have VIA's riser card somewhere,
> could check what it does.

Yes, VIA Epia EN12000.
Interesting to check the riser card.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at
Please read the FAQ at