Re: [PATCH] Add PCI device ID for IT8152 RISC-to-PCI chip

[Lennart Sorensen]

On Tue, Feb 13, 2007 at 03:30:29PM +0000, Russell King wrote:
> On Tue, Feb 13, 2007 at 10:16:33AM -0500, Lennart Sorensen wrote:
> > There doesn't seem to be very many
> > arm systems with PCI, so it's hard to tell.
> 
> NetWinder, EBSA285 (which the NetWinder is a derivative of), the N2100,
> etc are PCI based and are all well proven in the field.

Which PCI controller do they use?

> However, I have come across issues with what I suspect are buggy
> bridges - some southbridges require out of band cache control
> signalling and don't behave properly if you don't provide this (despite
> having modes to disable such signalling) and some PCMCIA bridges which
> don't like delayed read responses from host bridges.

Well certainly on the cpu board we were trying out, it didn't work,
whether it was a buggy PCI bridge, or a bad design I am not sure.  I
suspect the chip.

> That said, I've an EBSA285 with Promise UDMA, 3com NIC, S3 VGA and a
> plug-in southbridge card which has been running since about 1999 or so
> and the only real data corruption problem I've heard of was when a track
> on my Promise UDMA card was eaten by the sticky label resulting in silent
> corruption of writes to the disks.

Ouch.

> (I did consider replacing the Promise UDMA card, but the IT821x card
> I bought to replace it didn't have all the pins on the chip soldered
> down - to the extent that even a PC couldn't recognise the PCI card.
> So I'm running on the assumption that the self-repaired Promise UDMA
> card is all round going to be more reliable than the as yet unproven
> IT821x card.)

And they shipped a card in that state?

--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/