Re: ds.o: init_module: Operation not permitted (no socket driversloaded)

From: George Nychis
Date: Sat May 27 2006 - 02:57:16 EST




George Nychis wrote:
> Hey guys,
>
> I have a prism card that I would like to get working with my 2.4.32
> kernel. I installed pcmcia-cs and removed pcmcia support from the
> kernel, i am not sure if this was the right decision, if not please tell me.
>
> So after installing pcmcia_cs, i boot and modprobe pcmcia_core and
> hostap, then i try to modprobe hostap_cs and i get:
>
> [root@emu-5 hostap-driver-0.4.9]# modprobe hostap_cs
> /lib/modules/2.4.32/pcmcia/ds.o: init_module: Operation not permitted
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
>
> So of course I dmesg:
> ds: no socket drivers loaded!
>
> I can successfully get the card to work in my 2.6.9 kernel, here is my
> lsmod... the only thing i see different is the yenta_socket which I am
> not sure of:
> [root@emu-5 ~]# lsmod
> Module Size Used by
> parport_pc 24705 1
> lp 11565 0
> parport 41737 2 parport_pc,lp
> autofs4 24005 0
> i2c_dev 10433 0
> i2c_core 22081 1 i2c_dev
> sunrpc 160421 1
> hostap_cs 62656 3
> hostap 117132 1 hostap_cs
> ds 16965 3 hostap_cs
> button 6481 0
> battery 8517 0
> ac 4805 0
> md5 4033 1
> ipv6 232577 10
> yenta_socket 18753 1
> pcmcia_core 59913 3 hostap_cs,ds,yenta_socket
> uhci_hcd 31449 0
> ehci_hcd 31557 0
> snd_intel8x0 34829 0
> snd_ac97_codec 64401 1 snd_intel8x0
> snd_pcm_oss 47609 0
> snd_mixer_oss 17217 1 snd_pcm_oss
> snd_pcm 97993 2 snd_intel8x0,snd_pcm_oss
> snd_timer 29765 1 snd_pcm
> snd_page_alloc 9673 2 snd_intel8x0,snd_pcm
> gameport 4801 1 snd_intel8x0
> snd_mpu401_uart 8769 1 snd_intel8x0
> snd_rawmidi 26725 1 snd_mpu401_uart
> snd_seq_device 8137 1 snd_rawmidi
> snd 54053 9
> snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
> soundcore 9889 1 snd
> tg3 85445 0
> dm_snapshot 17029 0
> dm_zero 2369 0
> dm_mirror 23341 2
> ext3 116809 2
> jbd 74969 1 ext3
> dm_mod 54741 6 dm_snapshot,dm_zero,dm_mirror
> ata_piix 8389 2
> libata 40005 1 ata_piix
> sd_mod 16961 3
> scsi_mod 118417 2 libata,sd_mod
>
>
> I'd greatly appreciate any help!
>
> Thanks!
> George
>

Alright i'm going to respond to my own post real quick... I built pcmcia
support into the kernel instead of using pcmcia-cs. I now get the power
light on the card light up. So then I modprobe hostap and hostap_cs

I see this in dmesg:
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.9 - 2006-05-06 (Jouni Malinen <jkmaline@xxxxxxxxx>)

It also seems to be recognizing a card:
[root@emu-5 pcmcia]# cardctl info
PRODID_1="INTERSIL"
PRODID_2="HFA384x/IEEE"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0156,0002
FUNCID=6

However i see no wireless interfaces:
[root@emu-5 pcmcia]# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

[root@emu-5 pcmcia]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:11:43:43:D0:11
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:705 errors:0 dropped:0 overruns:0 frame:0
TX packets:454 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:65062 (63.5 KiB) TX bytes:81096 (79.1 KiB)
Interrupt:11

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)

Any ideas?

Thanks!
George
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/