[PATCH] ide_cs: Make ide_cs work with the memory space of CF-Cardsif IO space is not available

From: Thomas Kleffel (maintech GmbH)
Date: Wed May 10 2006 - 22:09:50 EST


From: Thomas Kleffel <tk@xxxxxxxxxxx>

this patch enables ide_cs to access CF-cards via their common memory
rather than via their IO space.

Signed-off-by: Thomas Kleffel <tk@xxxxxxxxxxx>
---

This patch is against 2.6.17-rc3

The reason why this patch makes sense is that it is pretty easy to build
a CF-Interface out of a simple address/data-bus if you only use common
and attribute memory. Adding the capability to access IO space makes
things more complicated.

If you just want to use CF-Storage cards, access to common and attribute
memory is enough as the IDE registers are available there, as well.

I have submitted a patch to RMK which enables the AT91RM9200's CF
interface to work in that mode.


diff -uprN l1/drivers/ide/legacy/ide-cs.c l2/drivers/ide/legacy/ide-cs.c
--- l1/drivers/ide/legacy/ide-cs.c 2006-05-11 00:19:59.000000000 +0200
+++ l2/drivers/ide/legacy/ide-cs.c 2006-05-11 03:38:03.000000000 +0200
@@ -263,6 +263,29 @@ static int ide_config(struct pcmcia_devi
break;
}

+ if ((cfg->mem.nwin > 0) || (stk->dflt.mem.nwin > 0)) {
+ win_req_t req;
+ memreq_t map;
+
+ cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &stk->dflt.mem;
+ req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ req.Attributes |= WIN_ENABLE;
+ req.Base = mem->win[0].host_addr;
+ req.Size = mem->win[0].len;
+
+ req.AccessSpeed = 0;
+ if (pcmcia_request_window(&link, &req, &link->win) != 0)
+ goto next_entry;
+ map.Page = 0; map.CardOffset = mem->win[0].card_addr;
+ if (pcmcia_map_mem_page(link->win, &map) != 0)
+ goto next_entry;
+
+ io_base = (unsigned long) ioremap(req.Base, req.Size);
+ ctl_base = io_base + 0x0e;
+
+ break;
+ }
+
next_entry:
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
memcpy(&stk->dflt, cfg, sizeof(stk->dflt));