Re: 2.6.12-rc1-mm3

[Reuben Farrelly]

Reuben Farrelly wrote:

> I'm repeatably getting this crash on shutdown in -mm3, and a few 
> releases earlier (but I can't be certain it was the same crash..)
>
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> ttyS4 at I/O 0xa400 (irq = 16) is a 16550A
> ttyS5 at I/O 0xa408 (irq = 16) is a 16550A
>
> This _may_ be the culprit, but I'm not sure:
>
> 03:03.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 
> 16550 UART) (rev 01) (prog-if 02 [16550])
>         Subsystem: Timedia Technology Co Ltd: Unknown device 0002
>         Flags: stepping, medium devsel, IRQ 16
>         I/O ports at a400 [size=32]

Ugh.  I'm an idiot, that will teach me for having two sessions to boxes 
running at once.

Wrong info above, but the trace is still valid.

Correct info follows:

ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS14 at I/O 0xb400 (irq = 217) is a 16550A
ttyS15 at I/O 0xb000 (irq = 217) is a 16550A

06:02.0 Serial controller: NetMos Technology PCI 9835 Multi-I/O 
Controller (rev
01) (prog-if 02 [16550])
        Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART)
        Flags: medium devsel, IRQ 217
        I/O ports at b400 [size=8]
        I/O ports at b000 [size=8]
        I/O ports at ac00 [size=8]
        I/O ports at a800 [size=8]
        I/O ports at a400 [size=8]
        I/O ports at a000 [size=16]


> The board is an Intel D925XCV.
>
> Shutdown goes like this:   (yes, hyperterminal sucks for the ^M 
> characters, sorry)

<trace omitted>

reuben
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/