md: bug in file drivers/md/md.c, line 1513

[Paul Slootman]

This is on kernel 2.6.11, mdadm 1.4.0

The system has MD devices that are auto-configured on boot.

However, there are also devices connected via another SCSI adapter
(actually, a Qlogic QLA2300). I'm using a module for that. As the
auto-configure only runs at boot (or rather, when the md subsystem is
started).  I wanted to restart a raid-0 device that I had previously
created. I did:

	mdadm --run /dev/md10

as a simple attempt to see what would happen. What happened was the
error message in the subject, and a "COMPLETE RAID STATE PRINTOUT"...
In that output there is a line "md10:", the next line is
"md1: <sde1><sdd1><sdc1><sdb1><sda1>".


Admittedly the usage may be wrong, but having the kernel say "bug" can't
be right :-)


Paul Slootman

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/