Re: kernel BUG at mm/rmap.c:483!

[Ammar T. Al-Sayegh]

> >  really; it was supposed to do that already
> > > 
> > >> i2c_dev                13249  0 
> > >> i2c_core               24513  1 i2c_dev
> > > 
> > > try for fun to not use i2c for a while
> > > 
> > >> microcode              11489  0 
> > > same for microcode... try removing that so that the microcode of your
> > > system doesn't get updated at boot
> >
> > What do these two modules do in particular? and how can I disable
> > them so that they don't get reloaded during boot time? do I need
> > to disable both i2c_dev and i2c_core or just one of them?
>
> i2c is used to directly talk to motherboard hardware such as temperature
> sensors. I've seen cases of certain chipset bugs leading to cacheline
> corruption when stuff talked to the slow i2c bus and did other stuff in
> parallel. 
>
> microcode changes the microcode of the cpu (a part of your cpu is
> actually written in "software" that can be updated); however updating
> this behind the back of the bios might not always be a good idea. (but I
> have no hard proof of any failures due to this)
>
> As for how to disable these.. you could just rename the respective .ko
> files to .notko or something....

Done. Following is my new loaded module list:

[root ~]# lsmod 
Module                  Size  Used by
ip_conntrack_ftp       76145  0 
md5                     8001  1 
ipv6                  236769  38 
autofs4                21829  0 
sunrpc                135077  1 
ipt_REJECT             10561  2 
ipt_state               5825  79 
ip_conntrack           45317  2 ip_conntrack_ftp,ipt_state
iptable_filter          7489  1 
ip_tables              20929  3 ipt_REJECT,ipt_state,iptable_filter
dm_mod                 57925  0 
video                  19653  0 
button                 10577  0 
battery                13253  0 
ac                      8773  0 
uhci_hcd               33497  0 
ehci_hcd               33737  0 
e1000                  84629  0 
floppy                 56913  0 
ext3                  117961  6 
jbd                    57177  1 ext3
3w_xxxx                30561  0 
ata_piix               12485  7 
libata                 44101  1 ata_piix
sd_mod                 20545  9 
scsi_mod              116033  3 3w_xxxx,libata,sd_mod

Looks better now?

I guess I can no longer monitor the processor temperature and
such after preventing i2c from loading, but what what's the
penalty of preventing microcode from loading? a performance
hit?

I will be testing memory as suggested by Hugh Dickins as well.
Hopefully, your trick or Hugh's suggestion will help revealing
the source of the problem, if not the kernel itself.


-ammar
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/