Re: yenta_socket rapid fires interrupts

[DHollenbeck]

Add to my last post, the information that IRQ 11 is only being used by the two yenta sockets. So the "toggling" is not really toggling, but the printing of the two card sockets which are both on the same IRQ?

root@EMBEDDED[~]# cat /proc/interrupts
          CPU0
 0:    4039920          XT-PIC  timer
 2:          0          XT-PIC  cascade
 4:        167          XT-PIC  serial
 8:          0          XT-PIC  rtc
 9:       1633          XT-PIC  eth0
11:     100000          XT-PIC  yenta, yenta
14:      11209          XT-PIC  ide0
NMI:          0
LOC:          0
ERR:          0
MIS:          0


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/