Re: 2.4.27 and CCISS related problem

[Marcelo Tosatti]

Hi,


On Wed, Nov 17, 2004 at 11:30:23AM +0200, Atro Tossavainen wrote:
> Hello all,
> 
> Got a problem with a HP Proliant DL380 with root on a RAID1 behind a
> Smart Array 5i+.  It boots up fine with 2.4.25, but halts every time
> with 2.4.27.  The following message should be printed:
> 
> 	HP CISS Driver (v 2.4.50)
> 	cciss: Device 0xb178 has been found at bus 1 dev 3 func 0
> 	      blocks= 71122560 block_size= 512
> 	      heads= 255, sectors= 32, cylinders= 8716 RAID 1(0+1)
> 	
> 	blk: queue c04c6c40, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
> 	Partition check:
> 	 cciss/c0d0: p1 p2 < p5 p6 p7 p8 >
> 
> But instead, it prints:
> 
> 	blk: queue c04c6c40, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
> 	Partition check:
> 	 cciss/c0d0:
> 
> and freezes there, but not so badly that Ctl-Alt-Del wouldn't let me
> reboot.  Anybody got any ideas?  The kernels I am using are based on
> Linus' from ftp.funet.fi, with i2c, lm_sensors and MOSIX added in.
> I can try with a completely vanilla 2.4.27 if necessary.

Please try vanilla v2.4.27.

If that doesnt work, go down to v2.4.26.

Both of them contain cciss updates.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/