2.4.27 and CCISS related problem

From: Atro Tossavainen
Date: Wed Nov 17 2004 - 04:35:09 EST


Hello all,

Got a problem with a HP Proliant DL380 with root on a RAID1 behind a
Smart Array 5i+. It boots up fine with 2.4.25, but halts every time
with 2.4.27. The following message should be printed:

HP CISS Driver (v 2.4.50)
cciss: Device 0xb178 has been found at bus 1 dev 3 func 0
blocks= 71122560 block_size= 512
heads= 255, sectors= 32, cylinders= 8716 RAID 1(0+1)

blk: queue c04c6c40, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Partition check:
cciss/c0d0: p1 p2 < p5 p6 p7 p8 >

But instead, it prints:

blk: queue c04c6c40, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Partition check:
cciss/c0d0:

and freezes there, but not so badly that Ctl-Alt-Del wouldn't let me
reboot. Anybody got any ideas? The kernels I am using are based on
Linus' from ftp.funet.fi, with i2c, lm_sensors and MOSIX added in.
I can try with a completely vanilla 2.4.27 if necessary.

--
Atro Tossavainen (Mr.) / The Institute of Biotechnology at
Systems Analyst, Techno-Amish & / the University of Helsinki, Finland,
+358-9-19158939 UNIX Dinosaur / employs me, but my opinions are my own.
< URL : http : / / www . helsinki . fi / %7E atossava / > NO FILE ATTACHMENTS
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/