Re: via 6420 pata/sata controller

[Kamil Okac]

>Bartlomiej Zolnierkiewicz wrote:
>> On Tuesday 30 of March 2004 15:24, Zdenek Tlusty wrote:
>>
>>>hello,
>>>
>>>I have problem with via 6420 controller under linux (I have mandrake 9.1
>>>with kernel 2.4.25 with libata patch version 16).
>>>This controller has two sata and one pata channels. Sata channel 
works fine
>>>with libata. My problem is with pata channel. I have pata hard disk 
on this
>>>controller. Bios of the controller detected this disk but linux did not.
>>>What is the current status of the driver for this controller?
>>>Thank you for your time.
>>
>>
>> There are some patches floating around adding support for VT6410
>> (not VT6420) to generic IDE PCI driver.  This controller may also work
>> with generic IDE PCI driver (PCI VendorID/ProductID needs to be added
>> to drivers/ide/pci/generic.h and drivers/ide/pci/generic.c).
>
>VT 6420 should be added to via82cxxx.c, since it does the necessary bus
>setup and such.  AFAICS it is programmed just like all the other VIA
>PATA controllers.
>
>> BTW Does anybody has contacts in VIA?
>
>Sure...  I'll check my VT 6420 cards as well.  It should just be another
>PCI id added to via82cxxx.c.
>
>	Jeff
>

Hello,

I tried to modify via82cxxx.c and .h, but was unsuccessful. Has anyone 
got it to work properly?

  Kamil Okac
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/