Re: 2.6.2-rc1 / libata 0.81 / sata_sil 0.52

[Mickael Marchand]

ok forget it, I was just reported it does not work...

Cheers,
Mik

Le Mercredi 21 Janvier 2004 14:41, Mickael Marchand a écrit :
> Hi,
>
> I have been reported this bug a few days ago by somebody else.
> I am waiting for his feedback on a patch.
>
> you can try the patch at
> ftp://ftp-fourier.ujf-grenoble.fr/kernel/2.6.2-rc1/
>
> I am really not sure of it (because I am no kernel hacker, so backup datas
> :), but maybe it will help.
> please report if you try it :)
>
> this is probably the same problem as the adaptec 1210sa but on a 3114 chip
> so I guess we need to enable DMA interrupts for 4 ports.
>
> Cheers,
> Mik
>
> Le Mercredi 21 Janvier 2004 14:25, Lars Täuber a écrit :
> > Hallo everybody,
> >
> > I'm not subscribed to this list! But I read the archive nearly regularly.
> >
> > But I want to offer a bug-/problem-report.
> >
> > We have here a dual opteron on a tyan K8S Pro (S2882) with an onbaord
> > SiI3114 and liked to get the system booting from the SATA disks attached
> > to this controller. (SuSE 9.0 x86_64)
> >
> > The driver works really good if you attach at most 2 disks on certain
> > channels.
> >
> > After realizing that this kernel (and previous kernels with patches from
> > Jeff Garzik) won't boot with 3 or 4 disks attached we compiled the
> > sata_sil driver as a modules and boot from an scsi disk.
> >
> > The controller seems to have some connections between the 1st and the 3rd
> > channel as well as between the 2nd and the 4th channel.
> >
> > If we attach disks on the [1st and (the 2nd xor the 4th)] channel every
> > thins works as expected. The same behaviour if we connect disks on the
> > [3rd and (the 2nd xor the 4th)] channel.
> >
> > But if we connect disks on the 1st and the 3rd channel the 'modprobe
> > sata_sil' hangs an we get the following log: [same when we connect disks
> > on 2nd and 4th channel]
> >
> >
> > Jan 21 14:56:44 inst-temp kernel: libata version 0.81 loaded.
> > Jan 21 14:56:44 inst-temp kernel: sata_sil version 0.52
> > Jan 21 14:56:44 inst-temp kernel: ata1: SATA max UDMA/133 cmd
> > 0xFFFFFF000007BC80 ctl 0xFFFFFF000007BC8A bmdma 0xFFFFFF000007BC00 irq 19
> > Jan 21 14:56:44 inst-temp kernel: ata2: SATA max UDMA/133 cmd
> > 0xFFFFFF000007BCC0 ctl 0xFFFFFF000007BCCA bmdma 0xFFFFFF000007BC08 irq 19
> > Jan 21 14:56:44 inst-temp kernel: ata3: SATA max UDMA/133 cmd
> > 0xFFFFFF000007BE80 ctl 0xFFFFFF000007BE8A bmdma 0xFFFFFF000007BE00 irq 19
> > Jan 21 14:56:44 inst-temp kernel: ata4: SATA max UDMA/133 cmd
> > 0xFFFFFF000007BEC0 ctl 0xFFFFFF000007BECA bmdma 0xFFFFFF000007BE08 irq 19
> > Jan 21 14:56:44 inst-temp kernel: ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09
> > 84:4003 85:7c69 86:3e01 87:4003 88:207f Jan 21 14:56:44 inst-temp kernel:
> > ata1: dev 0 ATA, max UDMA/133, 490234752 sectors (lba48) Jan 21 14:56:44
> > inst-temp kernel: ata1: dev 0 configured for UDMA/133 Jan 21 14:56:44
> > inst-temp kernel: scsi2 : sata_sil
> > Jan 21 14:56:45 inst-temp kernel: ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09
> > 84:4003 85:7c69 86:3e01 87:4003 88:207f Jan 21 14:56:45 inst-temp kernel:
> > ata2: dev 0 ATA, max UDMA/133, 490234752 sectors (lba48) Jan 21 14:56:45
> > inst-temp kernel: ata2: dev 0 configured for UDMA/133 Jan 21 14:56:45
> > inst-temp kernel: scsi3 : sata_sil
> > Jan 21 14:56:45 inst-temp kernel: ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09
> > 84:4003 85:7c69 86:3e01 87:4003 88:207f Jan 21 14:56:45 inst-temp kernel:
> > ata3: dev 0 ATA, max UDMA/133, 490234752 sectors (lba48) Jan 21 14:56:45
> > inst-temp kernel: ata3: dev 0 configured for UDMA/133 Jan 21 14:56:45
> > inst-temp kernel: scsi4 : sata_sil
> > Jan 21 14:56:45 inst-temp kernel: ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09
> > 84:4003 85:7c69 86:3e01 87:4003 88:207f Jan 21 14:56:45 inst-temp kernel:
> > ata4: dev 0 ATA, max UDMA/133, 490234752 sectors (lba48) Jan 21 14:56:45
> > inst-temp kernel: ata4: dev 0 configured for UDMA/133 Jan 21 14:56:45
> > inst-temp kernel: scsi5 : sata_sil
> > Jan 21 14:56:45 inst-temp kernel:   Vendor: ATA       Model: Maxtor
> > 7Y250M0 Rev: 0.81 Jan 21 14:56:45 inst-temp kernel:   Type:  
> > Direct-Access ANSI SCSI revision: 05 Jan 21 14:56:45 inst-temp kernel:
> > SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) Jan 21
> > 14:56:45 inst-temp kernel: SCSI device sdb: drive cache: write through
> > Jan 21 14:56:45 inst-temp kernel:  sdb:
> > Jan 21 14:56:45 inst-temp kernel: Attached scsi disk sdb at scsi2,
> > channel 0, id 0, lun 0 Jan 21 14:56:45 inst-temp kernel:   Vendor: ATA   
> >    Model: Maxtor 7Y250M0    Rev: 0.81 Jan 21 14:56:45 inst-temp kernel:  
> > Type: Direct-Access                      ANSI SCSI revision: 05 Jan 21
> > 14:56:45 inst-temp kernel: SCSI device sdc: 490234752 512-byte hdwr
> > sectors (251000 MB) Jan 21 14:56:45 inst-temp kernel: SCSI device sdc:
> > drive cache: write through Jan 21 14:56:45 inst-temp kernel:  sdc:
> > Jan 21 14:56:45 inst-temp kernel: Attached scsi disk sdc at scsi3,
> > channel 0, id 0, lun 0 Jan 21 14:56:45 inst-temp kernel:   Vendor: ATA   
> >    Model: Maxtor 7Y250M0    Rev: 0.81 Jan 21 14:56:45 inst-temp kernel:  
> > Type: Direct-Access                      ANSI SCSI revision: 05 Jan 21
> > 14:56:45 inst-temp kernel: SCSI device sdd: 490234752 512-byte hdwr
> > sectors (251000 MB) Jan 21 14:56:45 inst-temp kernel: SCSI device sdd:
> > drive cache: write through Jan 21 14:57:15 inst-temp kernel: 
> > sdd:<3>ata3: DMA timeout, stat 0x4
> >
> >
> > If we can help with further log or testing please contact me at my
> > original mail address. But I'll read the mailing list to form time to
> > time.
> >
> >
> > Sorry for my poor english.
> > Greatings
> > Lars Täuber
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> > in the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/