Re: Another keyboard woes with 2.6.0...

[Zwane Mwaikambo]

On Fri, 12 Sep 2003, Petr Vandrovec wrote:

>    I have MicroStar MS-9211 box with connected to the KVM switch
> MasterView CS-1016, which is connected to the some Chicony
> keyboard. 2.4.x kernel works without problem, but when 2.6.0
> starts, immediately after input device driver is initialized it starts
> thinking that F7 key is held down, and it stays that way until
> I hit some other key to stop autorepeat... What debugging I
> can do for you to get rid of screen full of '^[[18~' ? /bin/login
> continuously complains about username being too long :-(

Hi Petr,
	I have the same problem with an Avocent SwitchView and Keytronic 
keyboard, although it doesn't sound as bad as your problem. Occasionally 
some keys just repeat until i press another key. I'm not quite sure what 
kind of information Vojtech would like. The machine is 440BX based and 
kernel is 2.6.0-test3-mm1

          CPU0       CPU1
  0:  257421453  254104517    IO-APIC-edge  timer
  1:     424923     422774    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  3:     228634     228311    IO-APIC-edge  serial
  4:     116114     113964    IO-APIC-edge  serial
  8:   13986431   13605977    IO-APIC-edge  rtc
 12:    1836529    1831055    IO-APIC-edge  i8042
 14:    8919333    8754830    IO-APIC-edge  ide0
 15:    8852308    8762306    IO-APIC-edge  ide1
 16:   22023199   21397513   IO-APIC-level  radeon@PCI:1:0:0
 18:   11117225   10991498   IO-APIC-level  aic7xxx, aic7xxx, EMU10K1
 19:   10331810   10340569   IO-APIC-level  uhci-hcd, eth0, eth1
NMI:          0          0
LOC:  511599000  511599061
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/