Re: bkcvs vs. -test5 diff

[Larry McVoy]

I'll look after I've had some coffee.

On Tue, Sep 09, 2003 at 02:07:06PM +0200, Pavel Machek wrote:
> Hi!
> 
> I did diff between 2.6.0-test5 and bkcvs, and it seems there are some
> differences. Is it my fault or something wrong in bkcvs?
> 
> 								Pavel
> 
> --- clean/drivers/pcmcia/tcic.c	2003-08-27 12:00:29.000000000 +0200
> +++ /usr/src/linux-cvs/drivers/pcmcia/tcic.c	2003-07-14 01:47:01.000000000 +0200
> @@ -372,6 +372,9 @@
>  static struct platform_device tcic_device = {
>  	.name = "tcic-pcmcia",
>  	.id = 0,
> +	.dev = {
> +		.name = "tcic-pcmcia",
> +	},
>  };
>  
>  
> @@ -379,6 +382,15 @@
>  {
>      int i, sock, ret = 0;
>      u_int mask, scan;
> +    servinfo_t serv;
> +
> +    DEBUG(0, "%s\n", version);
> +    pcmcia_get_card_services_info(&serv);
> +    if (serv.Revision != CS_RELEASE_CODE) {
> +	printk(KERN_NOTICE "tcic: Card Services release "
> +	       "does not match!\n");
> +	return -1;
> +    }
>  
>      if (driver_register(&tcic_driver))
>  	return -1;
> --- clean/drivers/pcmcia/yenta_socket.h	2003-09-09 12:45:29.000000000 +0200
> +++ /usr/src/linux-cvs/drivers/pcmcia/yenta_socket.h	2003-06-30 22:34:07.000000000 +0200
> @@ -95,15 +95,6 @@
>   */
>  #define CB_MEM_PAGE(map)	(0x40 + (map))
>  
> -struct yenta_socket;
> -
> -struct cardbus_type {
> -	int	(*override)(struct yenta_socket *);
> -	void	(*save_state)(struct yenta_socket *);
> -	void	(*restore_state)(struct yenta_socket *);
> -	int	(*sock_init)(struct yenta_socket *);
> -};
> -
>  struct yenta_socket {
>  	struct pci_dev *dev;
>  	int cb_irq, io_irq;
> @@ -111,13 +102,9 @@
>  	struct timer_list poll_timer;
>  
>  	struct pcmcia_socket socket;
> -	struct cardbus_type *type;
>  
>  	/* A few words of private data for special stuff of overrides... */
>  	unsigned int private[8];
> -
> -	/* PCI saved state */
> -	u32 saved_state[18];
>  };
>  
>  
> --- clean/usr/initramfs_data.S	2003-07-27 22:31:46.000000000 +0200
> +++ /usr/src/linux-cvs/usr/initramfs_data.S	2003-07-20 21:11:39.000000000 +0200
> @@ -1,30 +1,2 @@
> -/*
> -  initramfs_data includes the compressed binary that is the
> -  filesystem used for early user space.
> -  Note: Older versions of "as" (prior to binutils 2.11.90.0.23
> -  released on 2001-07-14) dit not support .incbin.
> -  If you are forced to use older binutils than that then the
> -  following trick can be applied to create the resulting binary:
> -
> -
> -  ld -m elf_i386  --format binary --oformat elf32-i386 -r \
> -  -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
> -   ld -m elf_i386  -r -o built-in.o initramfs_data.o
> -
> -  initramfs_data.scr looks like this:
> -SECTIONS
> -{
> -       .init.ramfs : { *(.data) }
> -}
> -
> -  The above example is for i386 - the parameters vary from architectures.
> -  Eventually look up LDFLAGS_BLOB in an older version of the
> -  arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
> -
> -  Using .incbin has the advantage over ld that the correct flags are set
> -  in the ELF header, as required by certain architectures.
> -*/
> -
> -.section .init.ramfs,"a"
> +	.section .init.ramfs,"a"
>  .incbin "usr/initramfs_data.cpio.gz"
> -
> Only in /usr/src/linux-cvs/usr: initramfs_data.cpio
> Only in /usr/src/linux-cvs/usr: initramfs_data.cpio.gz
> 
> -- 
> When do you have a heart between your knees?
> [Johanka's followup: and *two* hearts?]
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-- 
---
Larry McVoy              lm at bitmover.com          http://www.bitmover.com/lm
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/