[2.4 patch] Fix IRQ_NONE clash in SCSI drivers

From: Adrian Bunk
Date: Tue Sep 02 2003 - 13:49:56 EST

Next message: Russell King: "Re: x86, ARM, PARISC, PPC, MIPS and Sparc folks please run this"
Previous message: Greg KH: "Re: devfs to be obsloted by udev?"
Next in thread: Arnaldo Carvalho de Melo: "Re: [2.4 patch] Fix IRQ_NONE clash in SCSI drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Aug 27, 2003 at 02:52:45PM -0300, Marcelo Tosatti wrote:
>...
> Summary of changes from v2.4.22 to v2.4.23-pre1
> ============================================
>...
> Arnaldo Carvalho de Melo:
> o irqreturn_t compatibility with 2.6
>...

This change added an (empty) IRQ_NONE #define to interrupt.h.

Several scsi drivers are already using an IRQ_NONE. Rename that to
SCSI_IRQ_NONE (a similar change was done in 2.5 by Andrew Morton several
months ago).

I've tested the compilation with 2.4.23-pre2.

Please apply
Adrian

--- linux-2.4.23-pre2-full/drivers/scsi/53c7,8xx.c.old 2003-09-02 20:27:14.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/53c7,8xx.c 2003-09-02 20:27:25.000000000 +0200
@@ -6397,7 +6397,7 @@
(struct NCR53c7x0_hostdata *) host->hostdata;
struct NCR53c7x0_cmd *cmd, *tmp;
shutdown (host);
- if (host->irq != IRQ_NONE)
+ if (host->irq != SCSI_IRQ_NONE)
{
int irq_count;
struct Scsi_Host *tmp;
--- linux-2.4.23-pre2-full/drivers/scsi/53c7,8xx.h.old 2003-09-02 20:27:25.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/53c7,8xx.h 2003-09-02 20:27:33.000000000 +0200
@@ -1428,7 +1428,7 @@

};

-#define IRQ_NONE 255
+#define SCSI_IRQ_NONE 255
#define DMA_NONE 255
#define IRQ_AUTO 254
#define DMA_AUTO 254
--- linux-2.4.23-pre2-full/drivers/scsi/53c7xx.c.old 2003-09-02 20:27:33.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/53c7xx.c 2003-09-02 20:27:42.000000000 +0200
@@ -6081,7 +6081,7 @@
(struct NCR53c7x0_hostdata *) host->hostdata[0];
struct NCR53c7x0_cmd *cmd, *tmp;
shutdown (host);
- if (host->irq != IRQ_NONE)
+ if (host->irq != SCSI_IRQ_NONE)
{
int irq_count;
struct Scsi_Host *tmp;
--- linux-2.4.23-pre2-full/drivers/scsi/53c7xx.h.old 2003-09-02 20:27:42.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/53c7xx.h 2003-09-02 20:27:49.000000000 +0200
@@ -1450,7 +1450,7 @@

};

-#define IRQ_NONE 255
+#define SCSI_IRQ_NONE 255
#define DMA_NONE 255
#define IRQ_AUTO 254
#define DMA_AUTO 254
--- linux-2.4.23-pre2-full/drivers/scsi/NCR5380.c.old 2003-09-02 20:27:49.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/NCR5380.c 2003-09-02 20:32:27.000000000 +0200
@@ -693,7 +693,7 @@
trying_irqs |= mask;

timeout = jiffies + (250 * HZ / 1000);
- probe_irq = IRQ_NONE;
+ probe_irq = SCSI_IRQ_NONE;

/*
* A interrupt is triggered whenever BSY = false, SEL = true
@@ -710,7 +710,7 @@
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);

- while (probe_irq == IRQ_NONE && time_before(jiffies, timeout))
+ while (probe_irq == SCSI_IRQ_NONE && time_before(jiffies, timeout))
barrier();

NCR5380_write(SELECT_ENABLE_REG, 0);
@@ -860,7 +860,7 @@

SPRINTF("\nBase Addr: 0x%05lX ", (long) instance->base);
SPRINTF("io_port: %04x ", (int) instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
SPRINTF("IRQ: None.\n");
else
SPRINTF("IRQ: %d.\n", instance->irq);
@@ -1706,7 +1706,7 @@
#endif /* def NCR_TIMEOUT */

dprintk(NDEBUG_SELECTION, ("scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->target));
- tmp[0] = IDENTIFY(((instance->irq == IRQ_NONE) ? 0 : 1), cmd->lun);
+ tmp[0] = IDENTIFY(((instance->irq == SCSI_IRQ_NONE) ? 0 : 1), cmd->lun);

len = 1;
cmd->tag = 0;
--- linux-2.4.23-pre2-full/drivers/scsi/dmx3191d.c.old 2003-09-02 20:27:59.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/dmx3191d.c 2003-09-02 20:33:02.000000000 +0200
@@ -96,7 +96,7 @@
printk(KERN_WARNING "dmx3191: IRQ %d not available - switching to polled mode.\n", pdev->irq);
/* Steam powered scsi controllers run without an IRQ
anyway */
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

boards++;
@@ -113,7 +113,7 @@
int dmx3191d_release_resources(struct Scsi_Host *instance)
{
release_region(instance->io_port, DMX3191D_REGION);
- if(instance->irq!=IRQ_NONE)
+ if(instance->irq != SCSI_IRQ_NONE)
free_irq(instance->irq, instance);

return 0;
--- linux-2.4.23-pre2-full/drivers/scsi/dtc.c.old 2003-09-02 20:28:12.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/dtc.c 2003-09-02 20:29:03.000000000 +0200
@@ -261,24 +261,24 @@
#ifndef DONT_USE_INTR
/* With interrupts enabled, it will sometimes hang when doing heavy
* reads. So better not enable them until I figure it out. */
- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, do_dtc_intr, SA_INTERRUPT, "dtc"))
{
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

- if (instance->irq == IRQ_NONE) {
+ if (instance->irq == SCSI_IRQ_NONE) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
#else
- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
printk(KERN_INFO "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
#endif
printk(KERN_INFO "scsi%d : at 0x%05X", instance->host_no, (int) instance->base);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
@@ -336,7 +336,7 @@
i = 0;
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ);
else
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ | CSR_INT_BASE);
@@ -384,7 +384,7 @@
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
/* set direction (write) */
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
NCR5380_write(DTC_CONTROL_REG, 0);
else
NCR5380_write(DTC_CONTROL_REG, CSR_5380_INTR);
--- linux-2.4.23-pre2-full/drivers/scsi/g_NCR5380.c.old 2003-09-02 20:29:03.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/g_NCR5380.c 2003-09-02 20:33:26.000000000 +0200
@@ -333,7 +333,7 @@
if (dev->irq_resource[0].flags & IORESOURCE_IRQ)
overrides[count].irq = dev->irq_resource[0].start;
else
- overrides[count].irq = IRQ_NONE;
+ overrides[count].irq = SCSI_IRQ_NONE;
if (dev->dma_resource[0].flags & IORESOURCE_DMA)
overrides[count].dma = dev->dma_resource[0].start;
else
@@ -430,19 +430,19 @@
else
instance->irq = NCR5380_probe_irq(instance, 0xffff);

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, do_generic_NCR5380_intr, SA_INTERRUPT, "NCR5380", NULL)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

- if (instance->irq == IRQ_NONE) {
+ if (instance->irq == SCSI_IRQ_NONE) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}

printk(KERN_INFO "scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int) instance->NCR5380_instance_name);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
@@ -489,7 +489,7 @@
release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
#endif

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
free_irq(instance->irq, NULL);

return 0;
@@ -802,7 +802,7 @@
PRINTP("NO NCR53C400 driver extensions\n");
#endif
PRINTP("Using %s mapping at %s 0x%lx, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name);
- if (scsi_ptr->irq == IRQ_NONE)
+ if (scsi_ptr->irq == SCSI_IRQ_NONE)
PRINTP("no interrupt\n");
else
PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq);
--- linux-2.4.23-pre2-full/drivers/scsi/mac_scsi.c.old 2003-09-02 20:29:11.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/mac_scsi.c 2003-09-02 20:29:32.000000000 +0200
@@ -253,16 +253,16 @@

((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, NCR5380_intr, IRQ_FLG_SLOW,
"ncr5380", NCR5380_intr)) {
printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk (KERN_INFO "s disabled");
else
printk (KERN_INFO " %d", instance->irq);
@@ -277,7 +277,7 @@

int macscsi_release (struct Scsi_Host *shpnt)
{
- if (shpnt->irq != IRQ_NONE)
+ if (shpnt->irq != SCSI_IRQ_NONE)
free_irq (shpnt->irq, NCR5380_intr);

return 0;
--- linux-2.4.23-pre2-full/drivers/scsi/pas16.c.old 2003-09-02 20:29:32.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/pas16.c 2003-09-02 20:30:00.000000000 +0200
@@ -99,11 +99,11 @@
* interrupts. Ie, for a board at the default 0x388 base port,
* boot: linux pas16=0x388,255
*
- * IRQ_NONE (255) should be specified for no interrupt,
+ * SCSI_IRQ_NONE (255) should be specified for no interrupt,
* IRQ_AUTO (254) to autoprobe for an IRQ line if overridden
* on the command line.
*
- * (IRQ_AUTO == 254, IRQ_NONE == 255 in NCR5380.h)
+ * (IRQ_AUTO == 254, SCSI_IRQ_NONE == 255 in NCR5380.h)
*/

#include <linux/module.h>
@@ -404,13 +404,13 @@
else
instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS);

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, do_pas16_intr, SA_INTERRUPT, "pas16", NULL)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

- if (instance->irq == IRQ_NONE) {
+ if (instance->irq == SCSI_IRQ_NONE) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
/* Disable 5380 interrupts, leave drive params the same */
@@ -420,7 +420,7 @@

printk(KERN_INFO "scsi%d : at 0x%04x", instance->host_no, (int)
instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
--- linux-2.4.23-pre2-full/drivers/scsi/sun3_scsi.c.old 2003-09-02 20:30:00.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/sun3_scsi.c 2003-09-02 20:30:16.000000000 +0200
@@ -267,7 +267,7 @@
#ifndef REAL_DMA
printk("scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
#else
printk("scsi%d: IRQ%d not free, bailing out\n",
instance->host_no, instance->irq);
@@ -276,7 +276,7 @@
}

printk("scsi%d: Sun3 5380 at port %lX irq", instance->host_no, instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk ("s disabled");
else
printk (" %d", instance->irq);
@@ -305,7 +305,7 @@
#ifdef MODULE
int sun3scsi_release (struct Scsi_Host *shpnt)
{
- if (shpnt->irq != IRQ_NONE)
+ if (shpnt->irq != SCSI_IRQ_NONE)
free_irq (shpnt->irq, NULL);

iounmap((void *)sun3_scsi_regp);
--- linux-2.4.23-pre2-full/drivers/scsi/sun3_scsi_vme.c.old 2003-09-02 20:30:16.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/sun3_scsi_vme.c 2003-09-02 20:30:37.000000000 +0200
@@ -236,7 +236,7 @@
#ifndef REAL_DMA
printk("scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
#else
printk("scsi%d: IRQ%d not free, bailing out\n",
instance->host_no, instance->irq);
@@ -245,7 +245,7 @@
}

printk("scsi%d: Sun3 5380 VME at port %lX irq", instance->host_no, instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk ("s disabled");
else
printk (" %d", instance->irq);
@@ -281,7 +281,7 @@
#ifdef MODULE
int sun3scsi_release (struct Scsi_Host *shpnt)
{
- if (shpnt->irq != IRQ_NONE)
+ if (shpnt->irq != SCSI_IRQ_NONE)
free_irq (shpnt->irq, NULL);

iounmap(sun3_scsi_regp);
--- linux-2.4.23-pre2-full/drivers/scsi/t128.c.old 2003-09-02 20:30:37.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/t128.c 2003-09-02 20:30:59.000000000 +0200
@@ -237,20 +237,20 @@
else
instance->irq = NCR5380_probe_irq(instance, T128_IRQS);

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, do_t128_intr, SA_INTERRUPT, "t128", NULL))
{
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

- if (instance->irq == IRQ_NONE) {
+ if (instance->irq == SCSI_IRQ_NONE) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}

printk(KERN_INFO "scsi%d : at 0x%08lx", instance->host_no,instance->base);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
--- linux-2.4.23-pre2-full/drivers/scsi/tmscsim.c.old 2003-09-02 20:30:59.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/tmscsim.c 2003-09-02 20:31:05.000000000 +0200
@@ -3047,7 +3047,7 @@
/* TO DO: We should check for outstanding commands first. */
dc390_shutdown (host);

- if (host->irq != IRQ_NONE)
+ if (host->irq != SCSI_IRQ_NONE)
{
DEBUG0(printk(KERN_INFO "DC390: Free IRQ %i\n",host->irq);)
free_irq (host->irq, pACB);
--- linux-2.4.23-pre2-full/drivers/scsi/tmscsim.h.old 2003-09-02 20:31:05.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/tmscsim.h 2003-09-02 20:31:21.000000000 +0200
@@ -11,7 +11,7 @@
#include <linux/types.h>
#include <linux/config.h>

-#define IRQ_NONE 255
+#define SCSI_IRQ_NONE 255

#define MAX_ADAPTER_NUM 4
#define MAX_SG_LIST_BUF 16 /* Not used */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
On Wed, Aug 27, 2003 at 02:52:45PM -0300, Marcelo Tosatti wrote:
>...
> Summary of changes from v2.4.22 to v2.4.23-pre1
> ============================================
>...
> Arnaldo Carvalho de Melo:
> o irqreturn_t compatibility with 2.6
>...

This change added an (empty) IRQ_NONE #define to interrupt.h.

Several scsi drivers are already using an IRQ_NONE. Rename that to
SCSI_IRQ_NONE (a similar change was done in 2.5 by Andrew Morton several
months ago).

I've tested the compilation with 2.4.23-pre2.

Please apply
Adrian

--- linux-2.4.23-pre2-full/drivers/scsi/53c7,8xx.c.old 2003-09-02 20:27:14.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/53c7,8xx.c 2003-09-02 20:27:25.000000000 +0200
@@ -6397,7 +6397,7 @@
(struct NCR53c7x0_hostdata *) host->hostdata;
struct NCR53c7x0_cmd *cmd, *tmp;
shutdown (host);
- if (host->irq != IRQ_NONE)
+ if (host->irq != SCSI_IRQ_NONE)
{
int irq_count;
struct Scsi_Host *tmp;
--- linux-2.4.23-pre2-full/drivers/scsi/53c7,8xx.h.old 2003-09-02 20:27:25.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/53c7,8xx.h 2003-09-02 20:27:33.000000000 +0200
@@ -1428,7 +1428,7 @@

};

-#define IRQ_NONE 255
+#define SCSI_IRQ_NONE 255
#define DMA_NONE 255
#define IRQ_AUTO 254
#define DMA_AUTO 254
--- linux-2.4.23-pre2-full/drivers/scsi/53c7xx.c.old 2003-09-02 20:27:33.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/53c7xx.c 2003-09-02 20:27:42.000000000 +0200
@@ -6081,7 +6081,7 @@
(struct NCR53c7x0_hostdata *) host->hostdata[0];
struct NCR53c7x0_cmd *cmd, *tmp;
shutdown (host);
- if (host->irq != IRQ_NONE)
+ if (host->irq != SCSI_IRQ_NONE)
{
int irq_count;
struct Scsi_Host *tmp;
--- linux-2.4.23-pre2-full/drivers/scsi/53c7xx.h.old 2003-09-02 20:27:42.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/53c7xx.h 2003-09-02 20:27:49.000000000 +0200
@@ -1450,7 +1450,7 @@

};

-#define IRQ_NONE 255
+#define SCSI_IRQ_NONE 255
#define DMA_NONE 255
#define IRQ_AUTO 254
#define DMA_AUTO 254
--- linux-2.4.23-pre2-full/drivers/scsi/NCR5380.c.old 2003-09-02 20:27:49.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/NCR5380.c 2003-09-02 20:32:27.000000000 +0200
@@ -693,7 +693,7 @@
trying_irqs |= mask;

timeout = jiffies + (250 * HZ / 1000);
- probe_irq = IRQ_NONE;
+ probe_irq = SCSI_IRQ_NONE;

/*
* A interrupt is triggered whenever BSY = false, SEL = true
@@ -710,7 +710,7 @@
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);

- while (probe_irq == IRQ_NONE && time_before(jiffies, timeout))
+ while (probe_irq == SCSI_IRQ_NONE && time_before(jiffies, timeout))
barrier();

NCR5380_write(SELECT_ENABLE_REG, 0);
@@ -860,7 +860,7 @@

SPRINTF("\nBase Addr: 0x%05lX ", (long) instance->base);
SPRINTF("io_port: %04x ", (int) instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
SPRINTF("IRQ: None.\n");
else
SPRINTF("IRQ: %d.\n", instance->irq);
@@ -1706,7 +1706,7 @@
#endif /* def NCR_TIMEOUT */

dprintk(NDEBUG_SELECTION, ("scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->target));
- tmp[0] = IDENTIFY(((instance->irq == IRQ_NONE) ? 0 : 1), cmd->lun);
+ tmp[0] = IDENTIFY(((instance->irq == SCSI_IRQ_NONE) ? 0 : 1), cmd->lun);

len = 1;
cmd->tag = 0;
--- linux-2.4.23-pre2-full/drivers/scsi/dmx3191d.c.old 2003-09-02 20:27:59.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/dmx3191d.c 2003-09-02 20:33:02.000000000 +0200
@@ -96,7 +96,7 @@
printk(KERN_WARNING "dmx3191: IRQ %d not available - switching to polled mode.\n", pdev->irq);
/* Steam powered scsi controllers run without an IRQ
anyway */
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

boards++;
@@ -113,7 +113,7 @@
int dmx3191d_release_resources(struct Scsi_Host *instance)
{
release_region(instance->io_port, DMX3191D_REGION);
- if(instance->irq!=IRQ_NONE)
+ if(instance->irq != SCSI_IRQ_NONE)
free_irq(instance->irq, instance);

return 0;
--- linux-2.4.23-pre2-full/drivers/scsi/dtc.c.old 2003-09-02 20:28:12.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/dtc.c 2003-09-02 20:29:03.000000000 +0200
@@ -261,24 +261,24 @@
#ifndef DONT_USE_INTR
/* With interrupts enabled, it will sometimes hang when doing heavy
* reads. So better not enable them until I figure it out. */
- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, do_dtc_intr, SA_INTERRUPT, "dtc"))
{
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

- if (instance->irq == IRQ_NONE) {
+ if (instance->irq == SCSI_IRQ_NONE) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
#else
- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
printk(KERN_INFO "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
#endif
printk(KERN_INFO "scsi%d : at 0x%05X", instance->host_no, (int) instance->base);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
@@ -336,7 +336,7 @@
i = 0;
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ);
else
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ | CSR_INT_BASE);
@@ -384,7 +384,7 @@
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
/* set direction (write) */
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
NCR5380_write(DTC_CONTROL_REG, 0);
else
NCR5380_write(DTC_CONTROL_REG, CSR_5380_INTR);
--- linux-2.4.23-pre2-full/drivers/scsi/g_NCR5380.c.old 2003-09-02 20:29:03.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/g_NCR5380.c 2003-09-02 20:33:26.000000000 +0200
@@ -333,7 +333,7 @@
if (dev->irq_resource[0].flags & IORESOURCE_IRQ)
overrides[count].irq = dev->irq_resource[0].start;
else
- overrides[count].irq = IRQ_NONE;
+ overrides[count].irq = SCSI_IRQ_NONE;
if (dev->dma_resource[0].flags & IORESOURCE_DMA)
overrides[count].dma = dev->dma_resource[0].start;
else
@@ -430,19 +430,19 @@
else
instance->irq = NCR5380_probe_irq(instance, 0xffff);

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, do_generic_NCR5380_intr, SA_INTERRUPT, "NCR5380", NULL)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

- if (instance->irq == IRQ_NONE) {
+ if (instance->irq == SCSI_IRQ_NONE) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}

printk(KERN_INFO "scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int) instance->NCR5380_instance_name);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
@@ -489,7 +489,7 @@
release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
#endif

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
free_irq(instance->irq, NULL);

return 0;
@@ -802,7 +802,7 @@
PRINTP("NO NCR53C400 driver extensions\n");
#endif
PRINTP("Using %s mapping at %s 0x%lx, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name);
- if (scsi_ptr->irq == IRQ_NONE)
+ if (scsi_ptr->irq == SCSI_IRQ_NONE)
PRINTP("no interrupt\n");
else
PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq);
--- linux-2.4.23-pre2-full/drivers/scsi/mac_scsi.c.old 2003-09-02 20:29:11.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/mac_scsi.c 2003-09-02 20:29:32.000000000 +0200
@@ -253,16 +253,16 @@

((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, NCR5380_intr, IRQ_FLG_SLOW,
"ncr5380", NCR5380_intr)) {
printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk (KERN_INFO "s disabled");
else
printk (KERN_INFO " %d", instance->irq);
@@ -277,7 +277,7 @@

int macscsi_release (struct Scsi_Host *shpnt)
{
- if (shpnt->irq != IRQ_NONE)
+ if (shpnt->irq != SCSI_IRQ_NONE)
free_irq (shpnt->irq, NCR5380_intr);

return 0;
--- linux-2.4.23-pre2-full/drivers/scsi/pas16.c.old 2003-09-02 20:29:32.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/pas16.c 2003-09-02 20:30:00.000000000 +0200
@@ -99,11 +99,11 @@
* interrupts. Ie, for a board at the default 0x388 base port,
* boot: linux pas16=0x388,255
*
- * IRQ_NONE (255) should be specified for no interrupt,
+ * SCSI_IRQ_NONE (255) should be specified for no interrupt,
* IRQ_AUTO (254) to autoprobe for an IRQ line if overridden
* on the command line.
*
- * (IRQ_AUTO == 254, IRQ_NONE == 255 in NCR5380.h)
+ * (IRQ_AUTO == 254, SCSI_IRQ_NONE == 255 in NCR5380.h)
*/

#include <linux/module.h>
@@ -404,13 +404,13 @@
else
instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS);

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, do_pas16_intr, SA_INTERRUPT, "pas16", NULL)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

- if (instance->irq == IRQ_NONE) {
+ if (instance->irq == SCSI_IRQ_NONE) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
/* Disable 5380 interrupts, leave drive params the same */
@@ -420,7 +420,7 @@

printk(KERN_INFO "scsi%d : at 0x%04x", instance->host_no, (int)
instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
--- linux-2.4.23-pre2-full/drivers/scsi/sun3_scsi.c.old 2003-09-02 20:30:00.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/sun3_scsi.c 2003-09-02 20:30:16.000000000 +0200
@@ -267,7 +267,7 @@
#ifndef REAL_DMA
printk("scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
#else
printk("scsi%d: IRQ%d not free, bailing out\n",
instance->host_no, instance->irq);
@@ -276,7 +276,7 @@
}

printk("scsi%d: Sun3 5380 at port %lX irq", instance->host_no, instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk ("s disabled");
else
printk (" %d", instance->irq);
@@ -305,7 +305,7 @@
#ifdef MODULE
int sun3scsi_release (struct Scsi_Host *shpnt)
{
- if (shpnt->irq != IRQ_NONE)
+ if (shpnt->irq != SCSI_IRQ_NONE)
free_irq (shpnt->irq, NULL);

iounmap((void *)sun3_scsi_regp);
--- linux-2.4.23-pre2-full/drivers/scsi/sun3_scsi_vme.c.old 2003-09-02 20:30:16.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/sun3_scsi_vme.c 2003-09-02 20:30:37.000000000 +0200
@@ -236,7 +236,7 @@
#ifndef REAL_DMA
printk("scsi%d: IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
#else
printk("scsi%d: IRQ%d not free, bailing out\n",
instance->host_no, instance->irq);
@@ -245,7 +245,7 @@
}

printk("scsi%d: Sun3 5380 VME at port %lX irq", instance->host_no, instance->io_port);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk ("s disabled");
else
printk (" %d", instance->irq);
@@ -281,7 +281,7 @@
#ifdef MODULE
int sun3scsi_release (struct Scsi_Host *shpnt)
{
- if (shpnt->irq != IRQ_NONE)
+ if (shpnt->irq != SCSI_IRQ_NONE)
free_irq (shpnt->irq, NULL);

iounmap(sun3_scsi_regp);
--- linux-2.4.23-pre2-full/drivers/scsi/t128.c.old 2003-09-02 20:30:37.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/t128.c 2003-09-02 20:30:59.000000000 +0200
@@ -237,20 +237,20 @@
else
instance->irq = NCR5380_probe_irq(instance, T128_IRQS);

- if (instance->irq != IRQ_NONE)
+ if (instance->irq != SCSI_IRQ_NONE)
if (request_irq(instance->irq, do_t128_intr, SA_INTERRUPT, "t128", NULL))
{
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = IRQ_NONE;
+ instance->irq = SCSI_IRQ_NONE;
}

- if (instance->irq == IRQ_NONE) {
+ if (instance->irq == SCSI_IRQ_NONE) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}

printk(KERN_INFO "scsi%d : at 0x%08lx", instance->host_no,instance->base);
- if (instance->irq == IRQ_NONE)
+ if (instance->irq == SCSI_IRQ_NONE)
printk(" interrupts disabled");
else
printk(" irq %d", instance->irq);
--- linux-2.4.23-pre2-full/drivers/scsi/tmscsim.c.old 2003-09-02 20:30:59.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/tmscsim.c 2003-09-02 20:31:05.000000000 +0200
@@ -3047,7 +3047,7 @@
/* TO DO: We should check for outstanding commands first. */
dc390_shutdown (host);

- if (host->irq != IRQ_NONE)
+ if (host->irq != SCSI_IRQ_NONE)
{
DEBUG0(printk(KERN_INFO "DC390: Free IRQ %i\n",host->irq);)
free_irq (host->irq, pACB);
--- linux-2.4.23-pre2-full/drivers/scsi/tmscsim.h.old 2003-09-02 20:31:05.000000000 +0200
+++ linux-2.4.23-pre2-full/drivers/scsi/tmscsim.h 2003-09-02 20:31:21.000000000 +0200
@@ -11,7 +11,7 @@
#include <linux/types.h>
#include <linux/config.h>

-#define IRQ_NONE 255
+#define SCSI_IRQ_NONE 255

#define MAX_ADAPTER_NUM 4
#define MAX_SG_LIST_BUF 16 /* Not used */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Russell King: "Re: x86, ARM, PARISC, PPC, MIPS and Sparc folks please run this"
Previous message: Greg KH: "Re: devfs to be obsloted by udev?"
Next in thread: Arnaldo Carvalho de Melo: "Re: [2.4 patch] Fix IRQ_NONE clash in SCSI drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]