> So basically, the "state" parameter should encore not only what state
> we want to go to, but rather, what will happen to the slot:
>
> - Nothing (it's entirely up to the driver to do it's own power
> management, that happens for some devices inside Apple ASIC), though in
> this case at least, those driver have control over the chip power, reset
> lines, etc...
> - Slot will be unclocked (it's up to the driver, it the chip supports
> static mode, to go to D2 or D3 if the driver can deal with it, though
> the system will do nothing to help the driver)
> - Slot will be powered off. This case should be broken up (via an
> additional flag passed to the driver ?) into 1) the system _will_
> re-POST the card before resume (BIOS/ACPI support, swsusp) or the
> system will NOT re-POST the card, the driver shall fail the sleep
> request if it can't do it by itself.
> - Embedded people may have even more weird cases ?
This is not necessarily a slot-by-slot question, but whether the entire
PCI/AGP buses will lose power during the sleep state, right?
There are a couple of things to note.
This is only an issue when doing suspend-to-RAM. Suspend-to-disk, and
power-on suspend will definitely lose power and definitely not lose any
power, respectively. So, you need a mechanism to determine what state the
system is entering.
Next, once you determine that we're entering suspend-to-RAM, you need to
know if the buses will lose power. In order to have a generic suspend
sequence, there must be a set of platform-specific methods to do all the
fun platform things that must be done. In that object, we can easily add a
flag that specifies whether or not the platform will lose power. This flag
can be initialized based on platform knowledge on startup.
In short, there should be no problems. Hopefully, I should have something
within the week to review/test. (Yeah yeah, talk is cheap, but I'm getting
there).
-pat
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Apr 23 2003 - 22:00:19 EST