James H. Cloos Jr. writes:
> Ulrich> Northwood P4's have one more bit in the CPUID processor info
> Ulrich> set: bit 31. Intel calls the feature PBE (Pending Break
> Ulrich> Enable).
>
> For the curious, from <http://www.aceshardware.com/forum?read=80030620>:
>
> Adrian> Bit 31 is PBE (Pending Break Enable) which you can find in the
> Adrian> latest P4 instruction manual (document 24547106, page
> Adrian> 159-162). To quote:
A better reference for this stuff is (IMHO) AP-485, the "Intel Processor
Identification and the CPUID Instruction" application note. It's regularly
updated, and in this particular case, its description of CPUID with EAX=1
differs from the IA32 Volume 2 manual (245471xx) in two ways:
- EBX bit 31 is called "SBF", Signal Break on FERR.
- ECX is defined to contain additional feature flags. Currently only one
is defined: ECX bit 10 is the "Context ID" feature for putting the L1
D-cache in adaptive or shared mode, which matters for hyper-threaded CPUs.
Supporting the new ECX feature flags in the kernel will require some surgery,
since the current code assumes x86_capability[0] is Intel, [1] is AMD,
[2] is Transmeta, and [3] is for conflicting or synthesized feature flags.
We either shift AMD etc down one index and put ECX in [1], or add a new index
[4] for ECX, or kludge the few ECX-defined features in [3].
/Mikael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 15 2003 - 22:00:53 EST