> Linux detects the two HPT374 controllers, but not the attached drives.
>
> The Mainboard is an EPOX EP-8K5A3+ with 2 VIA vt8235 ide controllers
> and 4 Highpoint 374.
>
> I increased the channels: limit for the HPT374 in drivers/ide/pci/hpt366.h
> to 4.
> --- drivers/ide/pci/hpt366.h.old 2002-11-19 17:41:33.000000000 +0100
> +++ drivers/ide/pci/hpt366.h 2002-11-19 17:41:45.000000000 +0100
> @@ -508,5 +508,5 @@
> init_hwif: init_hwif_hpt366,
> init_dma: init_dma_hpt366,
> - channels: 2, /* 4 */
> + channels: 4, /* 2 */
> autodma: AUTODMA,
> enablebits: {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
>
I have the same board, and the controller works fine for me in 2.5.4*, as
2.4-ac doesn't contain xfs suport. I only have one drive attached, but as I
remember I first had to configure the (raid) controller' BIOS (Ctrl-H at boot
time) (even for just a bunch of disks) before using the drives. But I'm not
100%ly sure.
I don't think there's any need for your patch, cause the hpt374 only has two
channels, but there are two controllers on that board.
ANother QUestion: Did you ever get the onboard via-rhine NIC working with
IO-APIC (both BIOS and kernel) enabled?
Christian
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:27 EST