> > The on-board is a VIA controller. see from lspci
> > 00:0c.0 Unknown mass storage controller: Promise Technology, Inc. 20268
> > (rev 02)
> > 00:0d.0 Unknown mass storage controller: Promise Technology, Inc. 20268
> > (rev 02)
> > 00:0e.0 RAID bus controller: CMD Technology Inc PCI0649 (rev 02)
> > 00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
> So you have your two raid drives connected to the VIA controller, right?
> Then have a look into the BIOS setup and see, if there's something that
> might affect the boot order...
I have 4 drives connected to each controller, that is, 2 drives per channel.
None are RAID controllers - just stupid ATA controllers.
point isn't to change bootorder - just to make bloody LILO work.
See fstab, jumbo-dmesg.txt, mdstat and raidtab in http://karlsbakk.net/bugs/
for more info
-- Roy Sigurd Karlsbakk, Datavaktmester
Computers are like air conditioners. They stop working when you open Windows.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to email@example.com More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jun 30 2002 - 22:00:14 EST