es1371 damaged after 2.2.x

From: Richard Gooch (rgooch@ras.ucalgary.ca)
Date: Sat Dec 15 2001 - 19:56:31 EST


  Hi, all. I've finally sat down and looked at a problem that's been
annoying me for a long time: the es1371 driver in 2.4.x does not allow
me to set the mic recording gain as high as the 2.2.x driver does.

With 2.2.20, the mixer channels SOUND_MIXER_MIC (7) and
SOUND_MIXER_RECLEV (11) can both be adjusted to control the recoding
level. The default levels are sufficient for my needs, and I can
adjust them to a much higher level.

With 2.4.17-rc1, I can only control the recording level with
SOUND_MIXER_IGAIN (12), and even setting it to the maximum 0x6464
value does not yield a satisfactory recording level. Changing
SOUND_MIXER_MIC (7) does not affect the recording level (unlike
2.2.x). Further, SOUND_MIXER_RECLEV (11) is not available for reading
or writing.

My guess is that the change in 2.3.x to use the ac97_codec driver for
es1371 is the cause of this damage. Under 2.4.x, the maximum available
recording level is barely usable for my application. Does anyone have
a fix for this?

Note that when I say "recording level", I do mean recording. For later
processing. I don't mean "gain from mic to headphones".

                                Regards,

                                        Richard....
Permanent: rgooch@atnf.csiro.au
Current: rgooch@ras.ucalgary.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Dec 15 2001 - 21:00:30 EST