Re: [lkml]Re: [lkml]Re: interrupt problem with MPS 1.4 / not with MPS 1.1 ?

From: Manfred Spraul (manfred@colorfullife.com)
Date: Thu May 31 2001 - 15:45:17 EST

Next message: Mark Frazer: "Re: Makefile patch for cscope and saner Ctags"
Previous message: Jim Freeman: "Re: Remaining undocumented Configure.help symbols"
In reply to: thunder7@xs4all.nl: "Re: [lkml]Re: [lkml]Re: interrupt problem with MPS 1.4 / not with MPS 1.1 ?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

thunder7@xs4all.nl wrote:
>
> 00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if 00 [UHCI])
> Subsystem: Unknown device 0925:1234
> Flags: bus master, medium devsel, latency 32, IRQ 5
> I/O ports at a000 [size=32]
> Capabilities: [80] Power Management version 2
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 04 00 00
>
> 0x3X is at 5, not at 3.
>
You still run with MPS 1.1.
It should be 3 or 19 after you reboot with MPS 1.4.

Could you please try the following commands as root, but just before
rebooting. It'll kill the USB controller.

#setpci -s 00:07.2 INTERRUPT_LINE=15
#lspci -vx -s 00:07.2
<<< 0x3C should be 15
#setpci -s 00:07.2 INTERRUPT_LINE=19
#lspci -vx -s 00:07.2
<<< 0x3C is now either 19 or 3

--
	Manfred
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Next message: Mark Frazer: "Re: Makefile patch for cscope and saner Ctags"
Previous message: Jim Freeman: "Re: Remaining undocumented Configure.help symbols"
In reply to: thunder7@xs4all.nl: "Re: [lkml]Re: [lkml]Re: interrupt problem with MPS 1.4 / not with MPS 1.1 ?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Thu May 31 2001 - 21:00:53 EST