Ingo Molnar wrote:
>
> On Sun, 11 Mar 2001, Keith Owens wrote:
>
> > Works for me. It even makes kdb simpler.
>
> agreed. Also, touch_nmi_watchdog() is stateless and is thus much less
> prone to locking bugs.
>
> i've attached nmi-watchdog-2.4.2-A1 that implements touch_nmi_watchdog(),
> ontop of 2.4.2-ac18, and changes show_state() to use this interface. (the
> patch also takes the NMI counters out of the obscure in-function place
> they used to be.)
>
> the patch compiles & boots just fine on 2.4.2-ac18 in both SMP and
> APIC-less-UP mode. The NMI watchdog is functional, and SysRq-T does not
> cause a lockup if used with a slow serial console that takes more than 5
> seconds to output the tasklist.
>
Sorry, this doesn't look right. Are you sure you booted
with `nmi_watchdog=1'? It was turned off by default in -ac18.
Two things:
- CPU A could be doing the SYSRQ printing, while
CPU B is spinning on a lock which CPU A holds. The
NMI watchdog will then whack CPU B. So touch_nmi_watchdog()
needs to touch *all* CPUs. (kbd_controller_lock, for example).
- We need to touch the NMI more than once during the
SYSRQ-T output - five seconds isn't enough.
The correctest way is, I think, to touch_nmi() in
rs285_console_write(), lp_console_write() and serial_console_write().
We _could_ just touch it in show_state(), but that means
we still get whacked if we do a lot of printk()s with interrupts
disabled from some random place in the kernel.
--- linux-2.4.2-ac18/arch/i386/kernel/nmi.c Sun Mar 11 15:12:31 2001
+++ linux-ac/arch/i386/kernel/nmi.c Sun Mar 11 21:03:18 2001
@@ -226,37 +226,39 @@
}
static spinlock_t nmi_print_lock = SPIN_LOCK_UNLOCKED;
-static atomic_t nmi_watchdog_disabled = ATOMIC_INIT(0);
-void nmi_watchdog_disable(void)
-{
- atomic_inc(&nmi_watchdog_disabled);
-}
+/*
+ * The best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check its local APIC timer IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs dont listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up
+ * here too!]
+ */
+
+static unsigned int
+ last_irq_sums [NR_CPUS],
+ alert_counter [NR_CPUS];
-void nmi_watchdog_enable(void)
+void touch_nmi_watchdog (void)
{
- atomic_dec(&nmi_watchdog_disabled);
+ /*
+ * Just reset the alert counters.
+ */
+ int cpu;
+
+ for (cpu = 0; cpu < smp_num_cpus; cpu++)
+ alert_counter[cpu] = 0;
}
void nmi_watchdog_tick (struct pt_regs * regs)
{
- /*
- * the best way to detect wether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are broadcasted to every CPU, here
- * we only have to check the current processor.
- *
- * since NMIs dont listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up
- * here too!]
- */
-
- static unsigned int last_irq_sums [NR_CPUS],
- alert_counter [NR_CPUS];
/*
* Since current-> is always on the stack, and we always switch
@@ -266,7 +268,7 @@
sum = apic_timer_irqs[cpu];
- if (last_irq_sums[cpu] == sum && atomic_read(&nmi_watchdog_disabled) == 0) {
+ if (last_irq_sums[cpu] == sum) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
--- linux-2.4.2-ac18/drivers/char/sysrq.c Sun Mar 11 15:12:34 2001
+++ linux-ac/drivers/char/sysrq.c Sun Mar 11 20:57:30 2001
@@ -70,11 +70,6 @@
if (!key)
return;
- /*
- * Interrupts are disabled, and serial consoles are slow. So
- * Let's suspend the NMI watchdog.
- */
- nmi_watchdog_disable();
console_loglevel = 7;
printk(KERN_INFO "SysRq: ");
switch (key) {
@@ -158,7 +153,6 @@
/* Don't use 'A' as it's handled specially on the Sparc */
}
- nmi_watchdog_enable();
console_loglevel = orig_log_level;
}
--- linux-2.4.2-ac18/drivers/char/serial.c Sun Mar 11 15:12:34 2001
+++ linux-ac/drivers/char/serial.c Sun Mar 11 20:58:58 2001
@@ -5478,10 +5478,11 @@
/*
* Wait for transmitter & holding register to empty
*/
-static inline void wait_for_xmitr(struct async_struct *info)
+static void wait_for_xmitr(struct async_struct *info)
{
unsigned int status, tmout = 1000000;
+ touch_nmi_watchdog();
do {
status = serial_in(info, UART_LSR);
--- linux-2.4.2-ac18/drivers/char/serial_21285.c Sun Feb 25 17:37:03 2001
+++ linux-ac/drivers/char/serial_21285.c Sun Mar 11 21:00:26 2001
@@ -385,6 +385,7 @@
while (*CSR_UARTFLG & 0x20);
*CSR_UARTDR = '\r';
}
+ touch_nmi_watchdog();
}
enable_irq(IRQ_CONTX);
}
--- linux-2.4.2-ac18/drivers/char/lp.c Sun Mar 11 15:12:34 2001
+++ linux-ac/drivers/char/lp.c Sun Mar 11 21:01:29 2001
@@ -576,8 +576,8 @@
canwrite = lf - s;
if (canwrite > 0) {
+ touch_nmi_watchdog();
written = parport_write (port, s, canwrite);
-
if (written <= 0)
continue;
@@ -594,6 +594,7 @@
s++;
count--;
do {
+ touch_nmi_watchdog();
written = parport_write (port, crlf, i);
if (written > 0)
i -= written, crlf += written;
--- linux-2.4.2-ac18/include/linux/irq.h Sun Mar 11 15:12:48 2001
+++ linux-ac/include/linux/irq.h Sun Mar 11 20:37:16 2001
@@ -57,18 +57,16 @@
#include <asm/hw_irq.h> /* the arch dependent stuff */
/**
- * nmi_watchdog_disable - disable NMI watchdog checking.
+ * touch_nmi_watchdog - restart NMI watchdog timeout.
*
- * If the architecture supports the NMI watchdog, nmi_watchdog_disable() may be used
- * to temporarily disable it. Use nmi_watchdog_enable() later on. It is implemented
- * via an up/down counter, so you must keep the calls balanced.
+ * If the architecture supports the NMI watchdog, touch_nmi_watchdog()
+ * may be used to reset the timeout - for code which intentionally
+ * disables interrupts for a long time. This call is stateless.
*/
#ifdef ARCH_HAS_NMI_WATCHDOG
-extern void nmi_watchdog_disable(void);
-extern void nmi_watchdog_enable(void);
+extern void touch_nmi_watchdog(void);
#else
-#define nmi_watchdog_disable() do{} while(0)
-#define nmi_watchdog_enable() do{} while(0)
+# define touch_nmi_watchdog() do { } while(0)
#endif
extern int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Mar 15 2001 - 21:00:12 EST