Problems with a Magik1 chipset board

From: David Pyke (
Date: Wed Feb 07 2001 - 07:39:22 EST

I own a Iwill KA266 which uses the ALi M1647 northbridge and M1535D+
south. I'm getting errors on startup and thought I should see if this
is an issue with the set or kernel 2.4.1

First, during the ALI15X3 starup I get:

PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try

according to /proc/pci,00:04.0 is an ALi M5229 IDE (rev 196).

Second, for agpgart I have to use try_agp_unsupported=1 which gets me

agpgart: Trying generic Ali routines for device id: 1647

according to my nvidia driver proc entry, agp is not enabled.

Is there more information I should provide?

Dave Pyke

No disclaimer shall be read or observed.  Any person (either corporate 
or individual) making any statement shall be held civily and criminally 
liable as a party to any act I may do while following the intentional, 
implied or inferred (whether correctly or not) directions from said 
statement.  So there.

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to Please read the FAQ at

This archive was generated by hypermail 2b29 : Wed Feb 07 2001 - 21:00:21 EST