Re: mmap()/VM problems in 2.4.0

From: Mike Galbraith (mikeg@wen-online.de)
Date: Mon Jan 15 2001 - 15:49:16 EST


On 15 Jan 2001, Zlatko Calusic wrote:

> "Vlad Bolkhovitine" <vladb@sw.com.sg> writes:
>
> > Here is updated info for 2.4.1pre3:
> >
> > Size is MB, BlkSz is Bytes, Read, Write, and Seeks are MB/sec
> >
> > with mmap()
> >
> > File Block Num Seq Read Rand Read Seq Write Rand Write
> > Dir Size Size Thr Rate (CPU%) Rate (CPU%) Rate (CPU%) Rate (CPU%)
> > ------- ------ ------- --- ----------- ----------- ----------- -----------
> > . 1024 4096 2 1.089 1.24% 0.235 0.45% 1.118 4.11% 0.616 1.41%
> >
> > without mmap()
> >
> > File Block Num Seq Read Rand Read Seq Write Rand Write
> > Dir Size Size Thr Rate (CPU%) Rate (CPU%) Rate (CPU%) Rate (CPU%)
> > ------- ------ ------- --- ----------- ----------- ----------- -----------
> > . 1024 4096 2 28.41 41.0% 0.547 1.15% 13.16 16.1% 0.652 1.46%
> >
> >
> > Mmap() performance dropped dramatically down to almost unusable level. Plus,
> > system was unusable during test: "vmstat 1" updated results every 1-2 _MINUTES_!
> >
>
> You need Marcelo's patch. Please apply and retest.

My box thinks quite highly of that patch fwiw, but insists that he needs
to apply Jens Axboes' blk patch first ;-) (Not because of tiobench)

        -Mike

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Jan 15 2001 - 21:00:41 EST